Loading repository data…
rajesh5310 / repository
This project involved the development of a x86 64 bit operating system (SBUnix). It was developed in C and Assembly language. System was tested on QEMU which is a hosted hypervisor that performs hardware virtualization.The developed OS support for Context Switching, Memory management, File System, Terminal and Shell. System calls: COW fork, execvpe, sleep, malloc, exit,read, write, wait, waitpid,ls, ps, scanf etc. Memory management : 4 level Paging , virtual memory management in Ring 0 and Ring 3, Page-fault Handling etc. File-System : PCI bus and AHCI sata device controller interfacing and management, system calls (fread,fwrite, fseek, opendir, readir, mkdir) This project was undertaken as a part of CSE 506 Operating Systems course.
=====70 POINT PROJECT=====
==USEFUL TIPS==
For filesystem, use the disk named "hdd.img" in cse506 folder. Disk Image size is 20 MB
If new disk is to created, here are the following steps:
1. Run the qemu command to create a 1 MB disk named "hdd.img" : qemu-img create hdd.img 20M
2. Insert superblock to that image using command : dd if=superblock of=hdd.img seek=1 conv=notrunc (superblock file is provided in the home directory, which is being generated using initialize_superblock.c)
3. Now, the hdd.img is ready to be used by our OS. Run Qemu with following command : qemu-system-x86_64 -curses -cdrom $USER.iso -drive id=disk,file=hdd.img,if=none -device ahci,id=ahci -device ide-drive,drive=disk,bus=ahci.0 -gdb tcp::$1
For Shutdown : type shutdown on shell.
For any queries, please contact SBUnix developers.
==SYSTEM CALLS==
/* File System Commands */
READ()
Syntax : read(file *file, uint64_t addr, char *buf )
Description : Whenever called this function reads the file in to the buffer 'buf'.
Dependencies : To open a file always use OPEN system call before reading and after the read is completed, close the file. This call returns -1 for the files whose WRONLY flag is set.
return : This call returns the length of bytes read into the buffer or -1 if there is an error
WRITE()
Syntax : int write(file *fd, char * buf, int size)
Description : Whenever called it writes up to 'size' number of bytes into the file descriptor 'fd' from the buffer starting at 'addr'.
Dependencies : To open a file always use OPEN system call before reading and after the read is completed, close the file.
This call returns -1 for the files opened with O_RDONLY flag set. It cannot do any write operations on tarfs.
return : This function retruns length of bytes written into the buffer or -1 on error
MALLOC()
Syntax : void *malloc(uint64_t size)
Description : Whenever called the size of vma is increased by 'size'.
return : This call returns the virtual address in heap
FORK()
Syntax : pid_t fork (void);
Description : Whenever called a child process is created. It returns pid = 0 for child process and non zero for parent process.
return : This call returns the pid for parent process or 0 for the child process.
EXECVPE()
Syntax : execvpe(char *file, char *argv[], char *envp[])
Description : Whenever called a file along with any necessary arguments argv[] in the environment envp[] is executed.
return : This call returns -1 on failure, and doesnot return anything on success
WAIT()
Syntax : wait(uint64_t status)
Description : Whenever called, the parent waits for a child process to exit.
return : This call returns -1 if the parent has no children.
EXIT()
Syntax : exit(int status)
Description : Whenever called the calling process is terminated immediately.
GETPID()
Syntax : getpid()
Description : Whenever called the process id of currently running process is returned.
GETPPID()
Syntax : getppid()
Description : Whenever called the parent's process id of currently running process is returned.
PS()
Syntax : ps()
Description : Whenever called the list of all currently running processes is returned.
OPENDIR()
Syntax : opendir(uint64_t* entry, uint64_t* directory)
Description : Whenever called,a directory struct with list of all inode/files in it is returned.
return : If an error occurs it will return directory struct with the values set to NULL.
READDIR()
Syntax : readdir(DIR* node)
Description : Whenver called iteratively, it will list contents in directory.
Dependencies : Read directory system call is always followed after open directory system call.
return : It will return the pointer to dirent structure .If end of directory is reached or an error occurs then it returns NULL.
OPEN()
Syntax : open(char* dir_path, uint64_t flags)
Description : Whenever called, a file is opened and a file descriptor is returned. It opens files from 'tarfs' and disk depending on 'dir_path'.
Dependencies : The flags can be one of the following: 'O_CREAT', 'O_RDONLY', 'O_WRONLY', 'O_APPEND', 'O_TRUNC', 'O_RDWR'.
return : This call returns file descriptor number open on a directory returns -1 as file descriptor.
SLEEP()
Syntax : sleep(int msec)
Description : The state of the current task is changed to 'sleep' for 'msec' milliseconds.
CLEAR()
Syntax : clear()
Description : Clears the screen.
SEEK()
Syntax : seek(uint64_t fd_type, int offset, int whence)
Description : When used it will move the current file pointer by offset number of bytes that is in the file.
Dependencies : whence can be SEEK_SET, SEEK_CUR, SEEK_END. Using this will provide the offset from start , current pointer or end of file.
SHUTDOWN()
Syntax : shutdown()
Description : This function is used to exit from all the processes.
Selected from shared topics, language and repository description—not editorial ratings.
microsoft /
This is the source code to the mostly-static Microsoft Open Source site featuring projects, program information, and "get involved" pages.
klonnet23 /
{ "releases": { "2.0.4": [ "[Fixed] Refresh for Enterprise repositories did not handle API error querying branches - #7713", "[Fixed] Missing \"Discard all changes\" context menu in Changes header - #7696", "[Fixed] \"Select all\" keyboard shortcut not firing on Windows - #7759" ], "2.0.4-beta1": [ "[Fixed] Refresh for Enterprise repositories did not handle API error querying branches - #7713", "[Fixed] Missing \"Discard all changes\" context menu in Changes header - #7696", "[Fixed] \"Select all\" keyboard shortcut not firing on Windows - #7759" ], "2.0.4-beta0": [ "[Added] Extend crash reports with more information about application state for troubleshooting - #7693", "[Fixed] Crash when attempting to update pull requests with partially updated repository information - #7688", "[Fixed] Crash when loading repositories after signing in through the welcome flow - #7699" ], "2.0.3": [ "[Fixed] Crash when loading repositories after signing in through the welcome flow - #7699" ], "2.0.2": [ "[Added] Extend crash reports with more information about application state for troubleshooting - #7693" ], "2.0.1": [ "[Fixed] Crash when attempting to update pull requests with partially updated repository information - #7688" ], "2.0.0": [ "[New] You can now choose to bring your changes with you to a new branch or stash them on the current branch when switching branches - #6107", "[New] Rebase your current branch onto another branch using a guided flow - #5953", "[New] Repositories grouped by owner, and recent repositories listed at top - #6923 #7132", "[New] Suggested next steps now includes suggestion to create a pull request after publishing a branch - #7505", "[Added] .resx syntax highlighting - #7235. Thanks @say25!", "[Added] \"Exit\" menu item now has accelerator and access key - #6507. Thanks @AndreiMaga!", "[Added] Help menu entry to view documentation about keyboard shortcuts - #7184", "[Added] \"Discard all changes\" action under Branch menu - #7394. Thanks @ahuth!", "[Fixed] \"Esc\" key does not close Repository or Branch list - #7177. Thanks @roottool!", "[Fixed] Attempting to revert commits not on current branch results in an error - #6300. Thanks @msftrncs!", "[Fixed] Emoji rendering in app when account name has special characters - #6909", "[Fixed] Files staged outside Desktop for deletion are incorrectly marked as modified after committing - #4133", "[Fixed] Horizontal scroll bar appears unnecessarily when switching branches - #7212", "[Fixed] Icon accessibility labels fail when multiple icons are visible at the same time - #7174", "[Fixed] Incorrectly encoding URLs affects issue filtering - #7506", "[Fixed] License templates do not end with newline character - #6999", "[Fixed] Conflicts banners do not hide after aborting operation outside Desktop - #7046", "[Fixed] Missing tooltips for change indicators in the sidebar - #7174", "[Fixed] Mistaken classification of all crashes being related to launch - #7126", "[Fixed] Unable to switch keyboard layout and retain keyboard focus while using commit form - #6366. Thanks @AndreiMaga!", "[Fixed] Prevent console errors due to underlying component unmounts - #6970", "[Fixed] Menus disabled by activity in inactive repositories - #6313", "[Fixed] Race condition with Git remote lookup may cause push to incorrect remote - #6986", "[Fixed] Restore GitHub Desktop to main screen if external monitor removed - #7418 #2107. Thanks @say25!", "[Fixed] Tab Bar focus ring outlines clip into other elements - #5802. Thanks @Daniel-McCarthy!", "[Improved] \"Automatically Switch Theme\" on macOS checks theme on launch - #7116. Thanks @say25!", "[Improved] \"Add\" button in repository list should always be visible - #6646", "[Improved] Pull Requests list loads and updates pull requests from GitHub more quickly - #7501 #7163", "[Improved] Indicator hidden in Pull Requests list when there are no open pull requests - #7258", "[Improved] Manually refresh pull requests instead of having to wait for a fetch - #7027", "[Improved] Accessibility attributes for dialog - #6496. Thanks @HirdayGupta!", "[Improved] Alignment of icons in repository list - #7133", "[Improved] Command line interface warning when using \"github open\" with a remote URL - #7452. Thanks @msztech!", "[Improved] Error message when unable to publish private repository to an organization - #7472", "[Improved] Initiate cloning by pressing \"Enter\" when a repository is selected - #6570. Thanks @Daniel-McCarthy!", "[Improved] Lowercase pronoun in \"Revert this commit\" menu item - #7534", "[Improved] Styles for manual resolution button in \"Resolve Conflicts\" dialog - #7302", "[Improved] Onboarding language for blank slate components - #6638. Thanks @jamesgeorge007!", "[Improved] Explanation for manually conflicted text files in diff viewer - #7611", "[Improved] Visual progress on \"Remove Repository\" and \"Discard Changes\" dialogs - #7015. Thanks @HashimotoYT!", "[Improved] Menu items now aware of force push state and preference to confirm repository removal - #4976 #7138", "[Removed] Branch and pull request filter text persistence - #7437", "[Removed] \"Discard all changes\" context menu item from Changes list - #7394. Thanks @ahuth!" ], "1.7.1-beta1": [ "[Fixed] Tab Bar focus ring outlines clip into other elements - #5802. Thanks @Daniel-McCarthy!", "[Improved] Show explanation for manually conflicted text files in diff viewer - #7611", "[Improved] Alignment of entries in repository list - #7133" ], "1.7.0-beta9": [ "[Fixed] Add warning when renaming a branch with a stash - #7283", "[Fixed] Restore Desktop to main screen when external monitor removed - #7418 #2107. Thanks @say25!", "[Improved] Performance for bringing uncommitted changes to another branch - #7474" ], "1.7.0-beta8": [ "[Added] Accelerator and access key to \"Exit\" menu item - #6507. Thanks @AndreiMaga!", "[Fixed] Pressing \"Shift\" + \"Alt\" in Commit summary moves input-focus to app menu - #6366. Thanks @AndreiMaga!", "[Fixed] Incorrectly encoding URLs affects issue filtering - #7506", "[Improved] Command line interface warns with helpful message when given a remote URL - #7452. Thanks @msztech!", "[Improved] Lowercase pronoun in \"Revert this commit\" menu item - #7534", "[Improved] \"Pull Requests\" list reflects pull requests from GitHub more quickly - #7501", "[Removed] Branch and pull request filter text persistence - #7437" ], "1.7.0-beta7": [ "[Improved] Error message when unable to publish private repository to an organization - #7472", "[Improved] \"Stashed changes\" button accessibility improvements - #7274", "[Improved] Performance improvements for bringing changes to another branch - #7471", "[Improved] Performance improvements for detecting conflicts from a restored stash - #7476" ], "1.7.0-beta6": [ "[Fixed] Stash viewer does not disable restore button when changes present - #7409", "[Fixed] Stash viewer does not center \"no content\" text - #7299", "[Fixed] Stash viewer pane width not remembered between sessions - #7416", "[Fixed] \"Esc\" key does not close Repository or Branch list - #7177. Thanks @roottool!", "[Fixed] Stash not cleaned up when it conflicts with working directory contents - #7383", "[Improved] Branch names remain accurate in dialog when stashing and switching branches - #7402", "[Improved] Moved \"Discard all changes\" to Branch menu to prevent unintentionally discarding all changes - #7394. Thanks @ahuth!", "[Improved] UI responsiveness when using keyboard to choose branch in rebase flow - #7407" ], "1.7.0-beta5": [ "[Fixed] Handle warnings if stash creation encounters file permission issue - #7351", "[Fixed] Add \"View stash entry\" action to suggested next steps - #7353", "[Fixed] Handle and recover from failed rebase flow starts - #7223", "[Fixed] Reverse button order when viewing a stash on macOS - #7273", "[Fixed] Prevent console errors due to underlying component unmounts - #6970", "[Fixed] Rebase success banner always includes base branch name - #7220", "[Improved] Added explanatory text for \"Restore\" button for stashes - #7303", "[Improved] Ask for confirmation before discarding stash - #7348", "[Improved] Order stashed changes files alphabetically - #7327", "[Improved] Clarify \"Overwrite Stash Confirmation\" dialog text - #7361", "[Improved] Message shown in rebase setup when target branch is already rebased - #7343", "[Improved] Update stashing prompt verbiage - #7393.", "[Improved] Update \"Start Rebase\" dialog verbiage - #7391", "[Improved] Changes list now reflects what will be committed when handling rebase conflicts - #7006" ], "1.7.0-beta4": [ "[Fixed] Manual conflict resolution choice not updated when resolving rebase conflicts - #7255", "[Fixed] Menu items don't display the expected verbiage for force push and removing a repository - #4976 #7138" ], "1.7.0-beta3": [ "[New] Users can choose to bring changes with them to a new branch or stash them on the current branch when switching branches - #6107", "[Added] GitHub Desktop keyboard shortcuts available in Help menu - #7184", "[Added] .resx file extension highlighting support - #7235. Thanks @say25!", "[Fixed] Attempting to revert commits not on current branch results in an error - #6300. Thanks @msftrncs!", "[Improved] Warn users before rebase if operation will require a force push after rebase complete - #6963", "[Improved] Do not show the number of pull requests when there are no open pull requests - #7258", "[Improved] Accessibility attributes for dialog - #6496. Thanks @HirdayGupta!", "[Improved] Initiate cloning by pressing \"Enter\" when a repository is selected - #6570. Thanks @Daniel-McCarthy!", "[Improved] Manual Conflicts button styling - #7302", "[Improved] \"Add\" button in repository list should always be visible - #6646" ], "1.7.0-beta2": [ "[New] Rebase your current branch onto another branch using a guided flow - #5953", "[Fixed] Horizontal scroll bar appears unnecessarily when switching branches - #7212", "[Fixed] License templates do not end with newline character - #6999", "[Fixed] Merge/Rebase conflicts banners do not clear when aborting the operation outside Desktop - #7046", "[Fixed] Missing tooltips for change indicators in the sidebar - #7174", "[Fixed] Icon accessibility labels fail when multiple icons are visible at the same time - #7174", "[Improved] Pull requests load faster and PR build status updates automatically - #7163" ], "1.7.0-beta1": [ "[New] Recently opened repositories appear at the top of the repository list - #7132", "[Fixed] Error when selecting diff text while diff is updating - #7131", "[Fixed] Crash when unable to create log file on disk - #7096", "[Fixed] Race condition with remote lookup could cause push to go to incorrect remote - #6986", "[Fixed] Mistaken classification of all crashes being related to launch - #7126", "[Fixed] Prevent menus from being disabled by activity in inactive repositories - #6313", "[Fixed] \"Automatically Switch Theme\" on macOS does not check theme on launch - #7116. Thanks @say25!", "[Fixed] Clicking \"Undo\" doesn't repopulate summary in commit form - #6390. Thanks @humphd!", "[Fixed] Emoji rendering in app broken when account name has special characters - #6909", "[Fixed] Files staged outside Desktop for deletion are incorrectly marked as modified after committing - #4133", "[Improved] Visual feedback on \"Remove Repository\" and \"Discard Changes\" dialogs to show progress - #7015. Thanks @HashimotoYT!", "[Improved] Onboarding language for blank slate components - #6638. Thanks @jamesgeorge007!", "[Improved] Manually refresh pull requests instead of having to wait for a fetch - #7027" ], "1.6.6": [ "[Fixed] Clicking \"Undo\" doesn't repopulate summary in commit form - #6390. Thanks @humphd!", "[Fixed] Handle error when unable to create log file for app - #7096", "[Fixed] Crash when selecting text while the underlying diff changes - #7131" ], "1.6.6-test1": [ "[Fixed] Clicking \"Undo\" doesn't repopulate summary in commit form - #6390. Thanks @humphd!", "[Fixed] Handle error when unable to create log file for app - #7096", "[Fixed] Crash when selecting text while the underlying diff changes - #7131" ], "1.6.5": [ "[Fixed] Publish Repository does not let you publish to an organization on your Enterprise account - #7052" ], "1.6.5-beta2": [ "[Fixed] Publish Repository does not let you choose an organization on your Enterprise account - #7052" ], "1.6.5-beta1": [ "[Fixed] Publish Repository does not let you choose an organization on your Enterprise account - #7052" ], "1.6.4": [ "[Fixed] Embedded Git not working for core.longpath usage in some environments - #7028", "[Fixed] \"Recover missing repository\" can get stuck in a loop - #7038" ], "1.6.4-beta1": [ "[Fixed] Embedded Git not working for core.longpath usage in some environments - #7028", "[Fixed] \"Recover missing repository\" can get stuck in a loop - #7038" ], "1.6.4-beta0": [ "[Removed] Option to discard when files would be overwritten by a checkout - #7016" ], "1.6.3": [ "[New] Display \"pull with rebase\" if a user has set this option in their Git config - #6553 #3422", "[Fixed] Context menu does not open when right clicking on the edges of files in Changes list - #6296. Thanks @JQuinnie!", "[Fixed] Display question mark in image when no commit selected in dark theme - #6915. Thanks @say25!", "[Fixed] No left padding for :emoji:/@user/#issue autocomplete forms. - #6895. Thanks @murrelljenna!", "[Fixed] Reinstate missing image and update illustration in dark theme when no local changes exist - #6894", "[Fixed] Resizing the diff area preserves text selection range - #2677", "[Fixed] Text selection in wrapped diff lines now allows selection of individual lines - #1551", "[Improved] Add option to fetch when a user needs to pull changes from the remote before pushing - #2738 #5451", "[Improved] Enable Git protocol v2 for fetch/push/pull operations - #6142", "[Improved] Moving mouse pointer outside visible diff while selecting a range of lines in a partial commit now automatically scrolls the diff - #658", "[Improved] Sign in form validates both username and password - #6952. Thanks @say25!", "[Improved] Update GitHub logo in \"About\" dialog - #5619. Thanks @HashimotoYT!" ], "1.6.3-beta4": [ "[Improved] Update GitHub logo in \"About\" dialog - #5619. Thanks @HashimotoYT!", "[Improved] Sign in form validates both username and password - #6952. Thanks @say25!" ], "1.6.3-beta3": [ "[New] Display \"pull with rebase\" if a user has set this option in their Git config - #6553 #3422", "[Added] Provide option to discard when files would be overwritten by a checkout - #6755. Thanks @mathieudutour!", "[Fixed] No left padding for :emoji:/@user/#issue autocomplete forms. - #6895. Thanks @murrelljenna!", "[Fixed] Reinstate missing image and fix illustration to work in the dark theme when there are no local changes - #6894", "[Fixed] Display question mark image when there is no commit selected in dark theme - #6915. Thanks @say25!", "[Improved] Group and filter repositories by owner - #6923", "[Improved] Add option to fetch when a user needs to pull changes from the remote before pushing - #2738 #5451" ], "1.6.3-beta2": [ "[Fixed] Text selection in wrapped diff lines now allows selection of individual lines - #1551", "[Fixed] Resizing the diff area preserves text selection range - #2677", "[Improved] Moving the mouse pointer outside of the visible diff while selecting a range of lines in a partial commit will now automatically scroll the diff - #658" ], "1.6.3-beta1": [ "[New] Branches that have been merged and deleted on GitHub.com will now be pruned after two weeks - #750", "[Fixed] Context menu doesn't open when right clicking on the edges of files in Changes list - #6296. Thanks @JQuinnie!", "[Improved] Enable Git protocol v2 for fetch/push/pull operations - #6142", "[Improved] Upgrade to Electron v3 - #6391" ], "1.6.2": [ "[Added] Allow users to also resolve manual conflicts when resolving merge conflicts - #6062", "[Added] Automatic switching between Dark and Light modes on macOS - #5037. Thanks @say25!", "[Added] Crystal and Julia syntax highlighting - #6710. Thanks @KennethSweezy!", "[Added] Lua and Fortran syntax highlighting - #6700. Thanks @SimpleBinary!", "[Fixed] Abbreviated commits are not long enough for large repositories - #6662. Thanks @say25!", "[Fixed] App menu bar visible on hover on Windows when in \"Let’s get started\" mode - #6669", "[Fixed] Fix pointy corners on commit message text area - #6635. Thanks @lisavogtsf!", "[Fixed] Inconsistent \"Reveal in …\" labels for context menus - #6466. Thanks @say25!", "[Fixed] Merge conflict conflict did not ask user to resolve some binary files - #6693", "[Fixed] Prevent concurrent fetches between user and status indicator checks - #6121 #5438 #5328", "[Fixed] Remember scroll positions in History and Changes lists - #5177 #5059. Thanks @Daniel-McCarthy!", "[Improved] Guided merge conflict resolution only commits changes relevant to the merge - #6349", "[Improved] Use higher contrast color for links in \"Merge Conflicts\" dialog - #6758", "[Improved] Add link to all release notes in Release Notes dialog - #6443. Thanks @koralcem!", "[Improved] Arrow for renamed/copied changes when viewing commit - #6519. Thanks @koralcem!", "[Improved] Updated verbiage for ignoring the files - #6689. Thanks @PaulViola!" ], "1.6.2-beta3": [ "[Improved] Guided merge conflict resolution only commits changes relevant to the merge - #6349" ], "1.6.2-beta2": [ "[Added] Allow users to also resolve manual conflicts when resolving merge conflicts - #6062", "[Added] Crystal and Julia syntax highlighting - #6710. Thanks @KennethSweezy!", "[Fixed] Fix pointy corners on commit message text area - #6635. Thanks @lisavogtsf!", "[Fixed] Use higher contrast color for links in \"Merge Conflicts\" dialog - #6758" ], "1.6.2-beta1": [ "[Added] Automatic switching between Dark and Light modes on macOS - #5037. Thanks @say25!", "[Added] Lua and Fortran syntax highlighting - #6700. Thanks @SimpleBinary!", "[Fixed] Abbreviated commits are not long enough for large repositories - #6662. Thanks @say25!", "[Fixed] App menu bar visible on hover on Windows when in \"Let’s get started\" mode - #6669", "[Fixed] Remember scroll positions in History and Changes lists - #5177 #5059. Thanks @Daniel-McCarthy!", "[Fixed] Inconsistent \"Reveal in …\" labels for context menus - #6466. Thanks @say25!", "[Fixed] Prevent concurrent fetches between user and status indicator checks - #6121 #5438 #5328", "[Fixed] Merge conflict conflict did not ask user to resolve some binary files - #6693", "[Improved] Add link to all release notes in Release Notes dialog - #6443. Thanks @koralcem!", "[Improved] Arrow for renamed/copied changes when viewing commit - #6519. Thanks @koralcem!", "[Improved] Menu state updating to address race condition - #6643", "[Improved] Updated verbiage when clicking on changed files to make it more explicit what will occur when you ignore the file(s) - #6689. Thanks @PaulViola!" ], "1.6.2-beta0": [ "[Fixed] Don't show \"No local changes\" view when switching between changed files" ], "1.6.1": [ "[Fixed] Don't show \"No local changes\" view when switching between changed files" ], "1.6.0": [ "[New] Help users add their first repo during onboarding - #6474", "[New] \"No local changes\" view helpfully suggests next actions for you to take - #6445", "[Added] Support JetBrains Webstorm as an external editor - #6077. Thanks @KennethSweezy!", "[Added] Add Visual Basic syntax highlighting - #6461. Thanks @SimpleBinary!", "[Fixed] Automatically locate a missing repository when it cannot be found - #6228. Thanks @msftrncs!", "[Fixed] Don't include untracked files in merge commit - #6411", "[Fixed] Don't show \"Still Conflicted Warning\" when all conflicts are resolved - #6451", "[Fixed] Only execute menu action a single time upon hitting Enter - #5344", "[Fixed] Show autocompletion of GitHub handles and issues properly in commit description field - #6459", "[Improved] Repository list when no repositories found - #5566 #6474", "[Improved] Image diff menu no longer covered by large images - #6520. Thanks @06b!", "[Improved] Enable additional actions during a merge conflict - #6385", "[Improved] Increase contrast on input placeholder color in dark mode - #6556", "[Improved] Don't show merge success banner when attempted merge doesn't complete - #6282", "[Improved] Capitalize menu items appropriately on macOS - #6469" ], "1.6.0-beta3": [ "[Fixed] Autocomplete selection does not overflow text area - #6459", "[Fixed] No local changes views incorrectly rendering ampersands - #6596", "[Improved] Capitalization of menu items on macOS - #6469" ], "1.6.0-beta2": [ "[New] \"No local changes\" view makes it easy to find and accomplish common actions - #6445", "[Fixed] Automatically locate a missing repository when it cannot be found - #6228. Thanks @msftrncs!", "[Improved] Enable additional actions during a merge conflict - #6385", "[Improved] Increase contrast on input placeholder color in dark mode - #6556", "[Improved] Merge success banner no longer shown when attempted merge doesn't complete - #6282" ], "1.6.0-beta1": [ "[New] Help users add their first repo during onboarding - #6474", "[Added] Include ability for users to add new repositories when there are none available - #5566 #6474", "[Added] Support JetBrains Webstorm as an external editor - #6077. Thanks @KennethSweezy!", "[Added] Add Visual Basic syntax highlighting - #6461. Thanks @SimpleBinary!", "[Fixed] Don't include untracked files in merge commit - #6411", "[Fixed] Don't show \"Still Conflicted Warning\" when all conflicts are resolved - #6451", "[Fixed] Enter when using keyboard to navigate app menu executed menu action twice - #5344", "[Improved] Image diff menu no longer covered by large images - #6520. Thanks @06b!" ], "1.5.2-beta0": [], "1.5.1": [ "[Added] Provide keyboard shortcut for getting to commit summary field - #1719. Thanks @bruncun!", "[Added] Add hover states on list items and tabs - #6310", "[Added] Add Dockerfile syntax highlighting - #4533. Thanks @say25!", "[Added] Support Visual SlickEdit as an external editor - #6029. Thanks @texasaggie97!", "[Fixed] Allow repositories to be cloned to empty folders - #5857. Thanks @Daniel-McCarthy!", "[Fixed] Prevent creating branch with detached HEAD from reverting to default branch - #6085", "[Fixed] Fix \"Open In External Editor\" for Atom/VS Code on Windows when paths contain spaces - #6181. Thanks @msftrncs!", "[Fixed] Persist Branch List and Pull Request List filter text - #6002. Thanks @Daniel-McCarthy!", "[Fixed] Retain renamed branches position in recent branches list - #6155. Thanks @gnehcc!", "[Fixed] Prevent avatar duplication when user is co-author and committer - #6135. Thanks @bblarney!", "[Fixed] Provide keyboard selection for the \"Clone a Repository\" dialog - #3596. Thanks @a-golovanov!", "[Fixed] Close License & Open Source Notices dialog upon pressing \"Enter\" in dialog - #6137. Thanks @bblarney!", "[Fixed] Dismiss \"Merge into Branch\" dialog with escape key - #6154. Thanks @altaf933!", "[Fixed] Focus branch selector when comparing to branch from menu - #5600", "[Fixed] Reverse fold/unfold icons for expand/collapse commit summary - #6196. Thanks @HazemAM!", "[Improved] Allow toggling between diff modes - #6231. Thanks @06b!", "[Improved] Show focus around full input field - #6234. Thanks @seokju-na!", "[Improved] Make lists scroll to bring selected items into view - #6279", "[Improved] Consistently order the options for adding a repository - #6396. Thanks @vilanz!", "[Improved] Clear merge conflicts banner after there are no more conflicted files - #6428" ], "1.5.1-beta6": [ "[Improved] Consistently order the options for adding a repository - #6396. Thanks @vilanz!", "[Improved] Clear merge conflicts banner after there are no more conflicted files - #6428" ], "1.5.1-beta5": [ "[Improved] Commit conflicted files warning - #6381", "[Improved] Dismissable merge conflict dialog and associated banner - #6379 #6380", "[Fixed] Fix feature flag for readme overwrite warning so that it shows on beta - #6412" ], "1.5.1-beta4": [ "[Improved] Display warning if existing readme file will be overwritten - #6338. Thanks @Daniel-McCarthy!", "[Improved] Add check for attempts to commit >100 MB files without Git LFS - #997. Thanks @Daniel-McCarthy!", "[Improved] Merge conflicts dialog visual updates - #6377" ], "1.5.1-beta3": [ "[Improved] Maintains state on tabs for different methods of cloning repositories - #5937" ], "1.5.1-beta2": [ "[Improved] Clarified internal documentation - #6348. Thanks @bblarney!" ], "1.5.1-beta1": [ "[Added] Provide keyboard shortcut for getting to commit summary field - #1719. Thanks @bruncun!", "[Added] Add hover states on list items and tabs - #6310", "[Added] Add Dockerfile syntax highlighting - #4533. Thanks @say25!", "[Added] Support Visual SlickEdit as an external editor - #6029. Thanks @texasaggie97!", "[Improved] Allow toggling between diff modes - #6231. Thanks @06b!", "[Improved] Show focus around full input field - #6234. Thanks @seokju-na!", "[Improved] Make lists scroll to bring selected items into view - #6279", "[Fixed] Allow repositories to be cloned to empty folders - #5857. Thanks @Daniel-McCarthy!", "[Fixed] Prevent creating branch with detached HEAD from reverting to default branch - #6085", "[Fixed] Fix 'Open In External Editor' for Atom/VS Code on Windows when paths contain spaces - #6181. Thanks @msftrncs!", "[Fixed] Persist Branch List and Pull Request List filter text - #6002. Thanks @Daniel-McCarthy!", "[Fixed] Retain renamed branches position in recent branches list - #6155. Thanks @gnehcc!", "[Fixed] Prevent avatar duplication when user is co-author and committer - #6135. Thanks @bblarney!", "[Fixed] Provide keyboard selection for the ‘Clone a Repository’ dialog - #3596. Thanks @a-golovanov!", "[Fixed] Close License & Open Source Notices dialog upon pressing \"Enter\" in dialog - #6137. Thanks @bblarney!", "[Fixed] Dismiss \"Merge into Branch\" dialog with escape key - #6154. Thanks @altaf933!", "[Fixed] Focus branch selector when comparing to branch from menu - #5600", "[Fixed] Reverse fold/unfold icons for expand/collapse commit summary - #6196. Thanks @HazemAM!" ], "1.5.1-beta0": [], "1.5.0": [ "[New] Clone, create, or add repositories right from the repository dropdown - #5878", "[New] Drag-and-drop to add local repositories from macOS tray icon - #5048", "[Added] Resolve merge conflicts through a guided flow - #5400", "[Added] Allow merging branches directly from branch dropdown - #5929. Thanks @bruncun!", "[Added] Commit file list now has \"Copy File Path\" context menu action - #2944. Thanks @Amabel!", "[Added] Keyboard shortcut for \"Rename Branch\" menu item - #5964. Thanks @agisilaos!", "[Added] Notify users when a merge is successfully completed - #5851", "[Fixed] \"Compare on GitHub\" menu item enabled when no repository is selected - #6078", "[Fixed] Diff viewer blocks keyboard navigation using reverse tab order - #2794", "[Fixed] Launching Desktop from browser always asks to clone repository - #5913", "[Fixed] Publish dialog displayed on push when repository is already published - #5936", "[Improved] \"Publish Repository\" dialog handles emoji characters - #5980. Thanks @WaleedAshraf!", "[Improved] Avoid repository checks when no path is specified in \"Create Repository\" dialog - #5828. Thanks @JakeHL!", "[Improved] Clarify the direction of merging branches - #5930. Thanks @JQuinnie!", "[Improved] Default commit summary more explanatory and consistent with GitHub.com - #6017. Thanks @Daniel-McCarthy!", "[Improved] Display a more informative message on merge dialog when branch is up to date - #5890", "[Improved] Getting a repository's status only blocks other operations when absolutely necessary - #5952", "[Improved] Display current branch in header of merge dialog - #6027", "[Improved] Sanitize repository name before publishing to GitHub - #3090. Thanks @Daniel-McCarthy!", "[Improved] Show the branch name in \"Update From Default Branch\" menu item - #3018. Thanks @a-golovanov!", "[Improved] Update license and .gitignore templates for initializing a new repository - #6024. Thanks @say25!" ], "1.5.0-beta5": [], "1.5.0-beta4": [ "[Fixed] \"Compare on GitHub\" menu item enabled when no repository is selected - #6078", "[Fixed] Diff viewer blocks keyboard navigation using reverse tab order - #2794", "[Improved] \"Publish Repository\" dialog handles emoji characters - #5980. Thanks @WaleedAshraf!" ], "1.5.0-beta3": [], "1.5.0-beta2": [ "[Added] Resolve merge conflicts through a guided flow - #5400", "[Added] Notify users when a merge is successfully completed - #5851", "[Added] Allow merging branches directly from branch dropdown - #5929. Thanks @bruncun!", "[Improved] Merge dialog displays current branch in header - #6027", "[Improved] Clarify the direction of merging branches - #5930. Thanks @JQuinnie!", "[Improved] Show the branch name in \"Update From Default Branch\" menu item - #3018. Thanks @a-golovanov!", "[Improved] Default commit summary more explanatory and consistent with GitHub.com - #6017. Thanks @Daniel-McCarthy!", "[Improved] Updated license and .gitignore templates for initializing a new repository - #6024. Thanks @say25!" ], "1.5.0-beta1": [ "[New] Repository switcher has a convenient \"Add\" button to add other repositories - #5878", "[New] macOS tray icon now supports drag-and-drop to add local repositories - #5048", "[Added] Keyboard shortcut for \"Rename Branch\" menu item - #5964. Thanks @agisilaos!", "[Added] Commit file list now has \"Copy File Path\" context menu action - #2944. Thanks @Amabel!", "[Fixed] Launching Desktop from browser always asks to clone repository - #5913", "[Fixed] Publish dialog displayed on push when repository is already published - #5936", "[Improved] Sanitize repository name before publishing to GitHub - #3090. Thanks @Daniel-McCarthy!", "[Improved] Getting a repository's status only blocks other operations when absolutely necessary - #5952", "[Improved] Avoid repository checks when no path is specified in \"Create Repository\" dialog - #5828. Thanks @JakeHL!", "[Improved] Display a more informative message on merge dialog when branch is up to date - #5890" ], "1.4.4-beta0": [], "1.4.3": [ "[Added] Add \"Remove Repository\" keyboard shortcut - #5848. Thanks @say25!", "[Added] Add keyboard shortcut to delete a branch - #5018. Thanks @JakeHL!", "[Fixed] Emoji autocomplete not rendering in some situations - #5859", "[Fixed] Release notes text overflowing dialog box - #5854. Thanks @amarsiingh!", "[Improved] Support Python 3 in Desktop CLI on macOS - #5843. Thanks @munir131!", "[Improved] Avoid unnecessarily reloading commit history - #5470", "[Improved] Publish Branch dialog will publish commits when pressing Enter - #5777. Thanks @JKirkYuan!" ], "1.4.3-beta2": [ "[Added] Added keyboard shortcut to delete a branch - #5018. Thanks @JakeHL!", "[Fixed] Fix release notes text overflowing dialog box - #5854. Thanks @amarsiingh!", "[Improved] Avoid unnecessarily reloading commit history - #5470" ], "1.4.3-beta1": [ "[Added] Add \"Remove Repository\" keyboard shortcut - #5848. Thanks @say25!", "[Fixed] Fix emoji autocomplete not rendering in some situations - #5859", "[Fixed] Support Python 3 in Desktop CLI on macOS - #5843. Thanks @munir131!", "[Improved] Publish Branch dialog will publish commits when pressing Enter - #5777. Thanks @JKirkYuan!" ], "1.4.3-beta0": [], "1.4.2": [ "[New] Show resolved conflicts as resolved in Changes pane - #5609", "[Added] Add Terminator, MATE Terminal, and Terminology shells - #5753. Thanks @joaomlneto!", "[Fixed] Update embedded Git to version 2.19.1 for security vulnerability fix", "[Fixed] Always show commit history list when History tab is clicked - #5783. Thanks @JKirkYuan!", "[Fixed] Stop overriding the protocol of a detected GitHub repository - #5721", "[Fixed] Update sign in error message - #5766. Thanks @tiagodenoronha!", "[Fixed] Correct overflowing T&C and License Notices dialogs - #5756. Thanks @amarsiingh!", "[Improved] Add default commit message for single-file commits - #5240. Thanks @lean257!", "[Improved] Refresh commit list faster after reverting commit via UI - #5752", "[Improved] Add repository path to Remove repository dialog - #5805. Thanks @NickCraver!", "[Improved] Display whether user entered incorrect username or email address - #5775. Thanks @tiagodenoronha!", "[Improved] Update Discard Changes dialog text when discarding all changes - #5744. Thanks @Daniel-McCarthy!" ], "1.4.2-beta0": [], "1.4.1-test2": [ "Testing changes to how Desktop performs CI platform checks" ], "1.4.1-test1": [ "Testing changes to how Desktop performs CI platform checks" ], "1.4.1": [ "[Added] Support for opening repository in Cygwin terminal - #5654. Thanks @LordOfTheThunder!", "[Fixed] 'Compare to Branch' menu item not disabled when modal is open - #5673. Thanks @kanishk98!", "[Fixed] Co-author form does not show/hide for newly-added repository - #5490", "[Fixed] Desktop command line always suffixes `.git` to URL when starting a clone - #5529. Thanks @j-f1!", "[Fixed] Dialog styling issue for dark theme users on Windows - #5629. Thanks @cwongmath!", "[Fixed] No message shown when filter returns no results in Clone Repository view - #5637. Thanks @DanielHix!", "[Improved] Branch names cannot start with a '+' character - #5594. Thanks @Daniel-McCarthy!", "[Improved] Clone dialog re-runs filesystem check when re-focusing on Desktop - #5518. Thanks @Daniel-McCarthy!", "[Improved] Commit disabled when commit summary is only spaces - #5677. Thanks @Daniel-McCarthy!", "[Improved] Commit summary expander sometimes shown when not needed - #5700. Thanks @aryyya!", "[Improved] Error handling when looking for merge base of a missing ref - #5612", "[Improved] Warning if branch exists on remote when creating branch - #5141. Thanks @Daniel-McCarthy!" ], "1.4.1-beta1": [ "[Added] Support for opening repository in Cygwin terminal - #5654. Thanks @LordOfTheThunder!", "[Fixed] 'Compare to Branch' menu item not disabled when modal is open - #5673. Thanks @kanishk98!", "[Fixed] No message shown when filter returns no results in Clone Repository view - #5637. Thanks @DanielHix!", "[Fixed] Co-author form does not show/hide for newly-added repository - #5490", "[Fixed] Dialog styling issue for dark theme users on Windows - #5629. Thanks @cwongmath!", "[Fixed] Desktop command line always suffixes `.git` to URL when starting a clone - #5529. Thanks @j-f1!", "[Improved] Commit summary expander sometimes shown when not needed - #5700. Thanks @aryyya!", "[Improved] Commit disabled when commit summary is only spaces - #5677. Thanks @Daniel-McCarthy!", "[Improved] Error handling when looking for merge base of a missing ref - #5612", "[Improved] Clone dialog re-runs filesystem check when re-focusing on Desktop - #5518. Thanks @Daniel-McCarthy!", "[Improved] Branch names cannot start with a '+' character - #5594. Thanks @Daniel-McCarthy!", "[Improved] Warning if branch exists on remote when creating branch - #5141. Thanks @Daniel-McCarthy!" ], "1.4.1-beta0": [], "1.4.0": [ "[New] When an update is available for GitHub Desktop, release notes can be viewed in Desktop - #2774", "[New] Detect merge conflicts when comparing branches - #4588", "[Fixed] Avoid double checkout warning when opening a pull request in Desktop - #5375", "[Fixed] Error when publishing repository is now associated with the right tab - #5422. Thanks @Daniel-McCarthy!", "[Fixed] Disable affected menu items when on detached HEAD - #5500. Thanks @say25!", "[Fixed] Show border when commit description is expanded - #5506. Thanks @aryyya!", "[Fixed] GitLab URL which corresponds to GitHub repository of same name cloned GitHub repository - #4154", "[Fixed] Caret in co-author selector is hidden when dark theme enabled - #5589", "[Fixed] Authenticating to GitHub Enterprise fails when user has no emails defined - #5585", "[Improved] Avoid multiple lookups of default remote - #5399" ], "1.4.0-beta3": [ "[New] When an update is available for GitHub Desktop, the release notes can be viewed in Desktop - #2774", "[New] Detect merge conflicts when comparing branches - #4588", "[Fixed] Avoid double checkout warning when opening a pull request in Desktop - #5375", "[Fixed] Error when publishing repository is now associated with the right tab - #5422. Thanks @Daniel-McCarthy!", "[Fixed] Disable affected menu items when on detached HEAD - #5500. Thanks @say25!", "[Fixed] Show border when commit description is expanded - #5506. Thanks @aryyya!", "[Fixed] GitLab URL which corresponds to GitHub repository of same name cloned GitHub repository - #4154", "[Improved] Avoid multiple lookups of default remote - #5399", "[Improved] Skip optional locks when checking status of repository - #5376" ], "1.4.0-beta2": [ "[New] When an update is available for GitHub Desktop, the release notes can be viewed in Desktop - #2774", "[New] Detect merge conflicts when comparing branches - #4588", "[Fixed] Avoid double checkout warning when opening a pull request in Desktop - #5375", "[Fixed] Error when publishing repository is now associated with the right tab - #5422. Thanks @Daniel-McCarthy!", "[Fixed] Disable affected menu items when on detached HEAD - #5500. Thanks @say25!", "[Fixed] Show border when commit description is expanded - #5506. Thanks @aryyya!", "[Fixed] GitLab URL which corresponds to GitHub repository of same name cloned GitHub repository - #4154", "[Improved] Avoid multiple lookups of default remote - #5399", "[Improved] Skip optional locks when checking status of repository - #5376" ], "1.4.0-beta1": [ "[New] When an update is available for GitHub Desktop, the release notes can be viewed in Desktop - #2774", "[New] Detect merge conflicts when comparing branches - #4588", "[Fixed] Avoid double checkout warning when opening a pull request in Desktop - #5375", "[Fixed] Error when publishing repository is now associated with the right tab - #5422. Thanks @Daniel-McCarthy!", "[Fixed] Disable affected menu items when on detached HEAD - #5500. Thanks @say25!", "[Fixed] Show border when commit description is expanded - #5506. Thanks @aryyya!", "[Fixed] GitLab URL which corresponds to GitHub repository of same name cloned GitHub repository - #4154", "[Improved] Avoid multiple lookups of default remote - #5399", "[Improved] Skip optional locks when checking status of repository - #5376" ], "1.4.0-beta0": [], "1.3.5": [ "[Fixed] Disable delete button while deleting a branch - #5331", "[Fixed] History now avoids calling log.showSignature if set in config - #5466", "[Fixed] Start blocking the ability to add local bare repositories - #4293. Thanks @Daniel-McCarthy!", "[Fixed] Revert workaround for tooltip issue on Windows - #3362. Thanks @divayprakash!", "[Improved] Error message when publishing to missing organisation - #5380. Thanks @Daniel-McCarthy!", "[Improved] Don't hide commit details when commit description is expanded. - #5471. Thanks @aryyya!" ], "1.3.5-beta1": [ "[Fixed] Disable delete button while deleting a branch - #5331", "[Fixed] History now avoids calling log.showSignature if set in config - #5466", "[Fixed] Start blocking the ability to add local bare repositories - #4293. Thanks @Daniel-McCarthy!", "[Fixed] Revert workaround for tooltip issue on Windows - #3362. Thanks @divayprakash!", "[Improved] Error message when publishing to missing organisation - #5380. Thanks @Daniel-McCarthy!", "[Improved] Don't hide commit details when commit summary description is expanded. - #5471. Thanks @aryyya!" ], "1.3.5-beta0": [], "1.3.4": [ "[Improved] Cloning message uses remote repo name not file destination - #5413. Thanks @lisavogtsf!", "[Improved] Support VSCode user scope installation - #5281. Thanks @saschanaz!" ], "1.3.4-beta1": [ "[Improved] Cloning message uses remote repo name not file destination - #5413. Thanks @lisavogtsf!", "[Improved] Support VSCode user scope installation - #5281. Thanks @saschanaz!" ], "1.3.4-beta0": [], "1.3.3": [ "[Fixed] Maximize and restore app on Windows does not fill available space - #5033", "[Fixed] 'Clone repository' menu item label is obscured on Windows - #5348. Thanks @Daniel-McCarthy!", "[Fixed] User can toggle files when commit is in progress - #5341. Thanks @masungwon!", "[Improved] Repository indicator background work - #5317 #5326 #5363 #5241 #5320" ], "1.3.3-beta1": [ "[Fixed] Maximize and restore app on Windows does not fill available space - #5033", "[Fixed] 'Clone repository' menu item label is obscured on Windows - #5348. Thanks @Daniel-McCarthy!", "[Fixed] User can toggle files when commit is in progress - #5341. Thanks @masungwon!", "[Improved] Repository indicator background work - #5317 #5326 #5363 #5241 #5320" ], "1.3.3-test6": ["Testing infrastructure changes"], "1.3.3-test5": ["Testing the new CircleCI config changes"], "1.3.3-test4": ["Testing the new CircleCI config changes"], "1.3.3-test3": ["Testing the new CircleCI config changes"], "1.3.3-test2": ["Testing the new CircleCI config changes"], "1.3.3-test1": ["Testing the new CircleCI config changes"], "1.3.2": [ "[Fixed] Bugfix for background checks not being aware of missing repositories - #5282", "[Fixed] Check the local state of a repository before performing Git operations - #5289", "[Fixed] Switch to history view for default branch when deleting current branch during a compare - #5256", "[Fixed] Handle missing .git directory inside a tracked repository - #5291" ], "1.3.2-beta1": [ "[Fixed] Bugfix for background checks not being aware of missing repositories - #5282", "[Fixed] Check the local state of a repository before performing Git operations - #5289", "[Fixed] Switch to history view for default branch when deleting current branch during a compare - #5256", "[Fixed] Handle missing .git directory inside a tracked repository - #5291" ], "1.3.1": [ "[Fixed] Background Git operations on missing repositories are not handled as expected - #5282" ], "1.3.1-beta1": [ "[Fixed] Background Git operations on missing repositories are not handled as expected - #5282" ], "1.3.1-beta0": [ "[New] Notification displayed in History tab when the base branch moves ahead of the current branch - #4768", "[New] Repository list displays uncommitted changes indicator and ahead/behind information - #2259 #5095", "[Added] Option to move repository to trash when removing from app - #2108. Thanks @say25!", "[Added] Syntax highlighting for PowerShell files - #5081. Thanks @say25!", "[Fixed] \"Discard Changes\" context menu discards correct file when entry is not part of selected group - #4788", "[Fixed] Display local path of selected repository as tooltip - #4922. Thanks @yongdamsh!", "[Fixed] Display root directory name when repository is located at drive root - #4924", "[Fixed] Handle legacy macOS right click gesture - #4942", "[Fixed] History omits latest commit from list - #5243", "[Fixed] Markdown header elements hard to read in dark mode - #5133. Thanks @agisilaos!", "[Fixed] Only perform ahead/behind comparisons when branch selector is open - #5142", "[Fixed] Relax checks for merge commits for GitHub Enterprise repositories - #4329", "[Fixed] Render clickable link in \"squash and merge\" commit message - #5203. Thanks @1pete!", "[Fixed] Return key disabled when no matches found in Compare branch list - #4458", "[Fixed] Selected commit not remembered when switching between History and Changes tabs - #4985", "[Fixed] Selected commit when comparing is reset to latest when Desktop regains focus - #5069", "[Fixed] Support default branch detection for non-GitHub repositories - #4937", "[Improved] Change primary button color to blue for dark theme - #5074", "[Improved] Diff gutter elements should be considered button elements when interacting - #5158", "[Improved] Status parsing significantly more performant when handling thousands of changed files - #2449 #5186" ], "1.3.0": [ "[New] Notification displayed in History tab when the base branch moves ahead of the current branch - #4768", "[New] Repository list displays uncommitted changes indicator and ahead/behind information - #2259 #5095", "[Added] Option to move repository to trash when removing from app - #2108. Thanks @say25!", "[Added] Syntax highlighting for PowerShell files - #5081. Thanks @say25!", "[Fixed] \"Discard Changes\" context menu discards correct file when entry is not part of selected group - #4788", "[Fixed] Display local path of selected repository as tooltip - #4922. Thanks @yongdamsh!", "[Fixed] Display root directory name when repository is located at drive root - #4924", "[Fixed] Handle legacy macOS right click gesture - #4942", "[Fixed] History omits latest commit from list - #5243", "[Fixed] Markdown header elements hard to read in dark mode - #5133. Thanks @agisilaos!", "[Fixed] Only perform ahead/behind comparisons when branch selector is open - #5142", "[Fixed] Relax checks for merge commits for GitHub Enterprise repositories - #4329", "[Fixed] Render clickable link in \"squash and merge\" commit message - #5203. Thanks @1pete!", "[Fixed] Return key disabled when no matches found in Compare branch list - #4458", "[Fixed] Selected commit not remembered when switching between History and Changes tabs - #4985", "[Fixed] Selected commit when comparing is reset to latest when Desktop regains focus - #5069", "[Fixed] Support default branch detection for non-GitHub repositories - #4937", "[Improved] Change primary button color to blue for dark theme - #5074", "[Improved] Diff gutter elements should be considered button elements when interacting - #5158", "[Improved] Status parsing significantly more performant when handling thousands of changed files - #2449 #5186" ], "1.3.0-beta7": [], "1.3.0-beta6": [], "1.3.0-beta5": [ "[Fixed] Ensure commit message is cleared after successful commit - #4046", "[Fixed] History omits latest commit from list - #5243" ], "1.3.0-beta4": [ "[Fixed] Only perform ahead/behind comparisons when branch selector is open - #5142", "[Fixed] Render clickable link in \"squash and merge\" commit message - #5203. Thanks @1pete!", "[Fixed] Selected commit not remembered when switching between History and Changes tabs - #4985", "[Fixed] Selected commit when comparing is reset to latest when Desktop regains focus - #5069" ], "1.3.0-beta3": [ "[Fixed] \"Discard Changes\" context menu discards correct file when entry is not part of selected group - #4788", "[Fixed] Return key disabled when no matches found in Compare branch list - #4458", "[Improved] Status parsing significantly more performant when handling thousands of changed files - #2449 #5186" ], "1.3.0-beta2": [ "[Added] Option to move repository to trash when removing from app - #2108. Thanks @say25!", "[Fixed] Markdown header elements hard to read in dark mode - #5133. Thanks @agisilaos!", "[Improved] Diff gutter elements should be considered button elements when interacting - #5158" ], "1.2.7-test3": ["Test deployment for electron version bump."], "1.3.0-beta1": [ "[New] Notification displayed in History tab when the base branch moves ahead of the current branch - #4768", "[New] Repository list displays uncommitted changes count and ahead/behind information - #2259", "[Added] Syntax highlighting for PowerShell files- #5081. Thanks @say25!", "[Fixed] Display something when repository is located at drive root - #4924", "[Fixed] Relax checks for merge commits for GitHub Enterprise repositories - #4329", "[Fixed] Display local path of selected repository as tooltip - #4922. Thanks @yongdamsh!", "[Fixed] Support default branch detection for non-GitHub repositories - #4937", "[Fixed] Handle legacy macOS right click gesture - #4942", "[Improved] Repository list badge style tweaks and tweaks for dark theme - #5095", "[Improved] Change primary button color to blue for dark theme - #5074" ], "1.2.7-test2": ["Test deployment for electron version bump."], "1.2.7-test1": ["Sanity check deployment for refactored scripts"], "1.2.7-beta0": [ "[Fixed] Visual indicator for upcoming feature should not be shown - #5026" ], "1.2.6": [ "[Fixed] Visual indicator for upcoming feature should not be shown - #5026" ], "1.2.6-beta0": [ "[Fixed] Feature flag for upcoming feature not applied correctly - #5024" ], "1.2.5": [ "[Fixed] Feature flag for upcoming feature not applied correctly - #5024" ], "1.2.4": [ "[New] Dark Theme preview - #4849", "[Added] Syntax highlighting for Cake files - #4935. Thanks @say25!", "[Added] WebStorm support for macOS - #4841. Thanks @mrsimonfletcher!", "[Fixed] Compare tab appends older commits when scrolling to bottom of list - #4964", "[Fixed] Remove temporary directory after Git LFS operation completes - #4414", "[Fixed] Unable to compare when two branches exist - #4947 #4730", "[Fixed] Unhandled errors when refreshing pull requests fails - #4844 #4866", "[Improved] Remove context menu needs to hint if a dialog will be shown - #4975", "[Improved] Upgrade embedded Git LFS - #4602 #4745", "[Improved] Update banner message clarifies that only Desktop needs to be restarted - #4891. Thanks @KennethSweezy!", "[Improved] Discard Changes context menu entry should contain ellipses when user needs to confirm - #4846. Thanks @yongdamsh!", "[Improved] Initializing syntax highlighting components - #4764", "[Improved] Only show overflow shadow when description overflows - #4898", "[Improved] Changes tab displays number of changed files instead of dot - #4772. Thanks @yongdamsh!" ], "1.2.4-beta5": [], "1.2.4-beta4": [ "[Fixed] Compare tab appends older commits when scrolling to bottom of list - #4964", "[Fixed] Remove temporary directory after Git LFS operation completes - #4414", "[Improved] Remove context menu needs to hint if a dialog will be shown - #4975", "[Improved] Upgrade embedded Git LFS - #4602 #4745" ], "1.2.4-test1": [ "Confirming latest Git LFS version addresses reported issues" ], "1.2.4-beta3": [ "[Added] WebStorm support for macOS - #4841. Thanks @mrsimonfletcher!", "[Improved] Update banner message clarifies that only Desktop needs to be restarted - #4891. Thanks @KennethSweezy!" ], "1.2.4-beta2": [], "1.2.4-beta1": [ "[New] Dark Theme preview - #4849", "[Added] Syntax highlighting for Cake files - #4935. Thanks @say25!", "[Fixed] Unable to compare when two branches exist - #4947 #4730", "[Fixed] Unhandled errors when refreshing pull requests fails - #4844 #4866", "[Improved] Discard Changes context menu entry should contain ellipses when user needs to confirm - #4846. Thanks @yongdamsh!", "[Improved] Initializing syntax highlighting components - #4764", "[Improved] Only show overflow shadow when description overflows - #4898", "[Improved] Changes tab displays number of changed files instead of dot - #4772. Thanks @yongdamsh!" ], "1.2.3": [ "[Fixed] No autocomplete when searching for co-authors - #4847", "[Fixed] Error when checking out a PR from a fork - #4842" ], "1.2.3-beta1": [ "[Fixed] No autocomplete when searching for co-authors - #4847", "[Fixed] Error when checking out a PR from a fork - #4842" ], "1.2.3-test1": [ "Confirming switch from uglify-es to babel-minify addresses minification issue - #4871" ], "1.2.2": [ "[Fixed] Make cURL/schannel default to using the Windows certificate store - #4817", "[Fixed] Restore text selection highlighting in diffs - #4818" ], "1.2.2-beta1": [ "[Fixed] Make cURL/schannel default to using the Windows certificate store - #4817", "[Fixed] Text selection highlighting in diffs is back - #4818" ], "1.2.1": [ "[Added] Brackets support for macOS - #4608. Thanks @3raxton!", "[Added] Pull request number and author are included in fuzzy-find filtering - #4653. Thanks @damaneice!", "[Fixed] Decreased the max line length limit - #3740. Thanks @sagaragarwal94!", "[Fixed] Updated embedded Git to 2.17.1 to address upstream security issue - #4791", "[Improved] Display the difference in file size of an image in the diff view - #4380. Thanks @ggajos!" ], "1.2.1-test1": ["Upgraded embedded Git to 2.17.0"], "1.2.1-beta1": [ "[Added] Brackets support for macOS - #4608. Thanks @3raxton!", "[Added] Pull request number and author are included in fuzzy-find filtering - #4653. Thanks @damaneice!", "[Fixed] Decreased the max line length limit - #3740. Thanks @sagaragarwal94!", "[Fixed] Updated embedded Git to 2.17.1 to address upstream security issue - #4791", "[Improved] Display the difference in file size of an image in the diff view - #4380. Thanks @ggajos!" ], "1.2.1-beta0": [], "1.1.2-test6": ["Testing the Webpack v4 output from the project"], "1.2.0": [ "[New] History now has ability to compare to another branch and merge outstanding commits", "[New] Support for selecting more than one file in the changes list - #1712. Thanks @icosamuel!", "[New] Render bitmap images in diffs - #4367. Thanks @MagicMarvMan!", "[Added] Add PowerShell Core support for Windows and macOS - #3791. Thanks @saschanaz!", "[Added] Add MacVim support for macOS - #4532. Thanks @johnelliott!", "[Added] Syntax highlighting for JavaServer Pages (JSP) - #4470. Thanks @damaneice!", "[Added] Syntax highlighting for Haxe files - #4445. Thanks @Gama11!", "[Added] Syntax highlighting for R files - #4455. Thanks @say25!", "[Fixed] 'Open in Shell' on Linux ensures Git is on PATH - #4619. Thanks @ziggy42!", "[Fixed] Pressing 'Enter' on filtered Pull Request does not checkout - #4673", "[Fixed] Alert icon shrinks in rename dialog when branch name is long - #4566", "[Fixed] 'Open in Desktop' performs fetch to ensure branch exists before checkout - #3006", "[Fixed] 'Open in Default Program' on Windows changes the window title - #4446", "[Fixed] Skip fast-forwarding when there are many eligible local branches - #4392", "[Fixed] Image diffs not working for files with upper-case file extension - #4466", "[Fixed] Syntax highlighting not working for files with upper-case file extension - #4462. Thanks @say25!", "[Fixed] Error when creating Git LFS progress causes clone to fail - #4307. Thanks @MagicMarvMan!", "[Fixed] 'Open File in External Editor' always opens a new instance - #4381", "[Fixed] 'Select All' shortcut now works for changes list - #3821", "[Improved] Automatically add valid repository when using command line interface - #4513. Thanks @ggajos!", "[Improved] Always fast-forward the default branch - #4506", "[Improved] Warn when trying to rename a published branch - #4035. Thanks @agisilaos!", "[Improved] Added context menu for files in commit history - #2845. Thanks @crea7or", "[Improved] Discarding all changes always prompts for confirmation - #4459", "[Improved] Getting list of changed files is now more efficient when dealing with thousands of files - #4443", "[Improved] Checking out a Pull Request may skip unnecessary fetch - #4068. Thanks @agisilaos!", "[Improved] Commit summary now has a hint to indicate why committing is disabled - #4429.", "[Improved] Pull request status text now matches format on GitHub - #3521", "[Improved] Add escape hatch to disable hardware acceleration when launching - #3921" ], "1.1.2-beta7": [], "1.1.2-beta6": [ "[Added] Add MacVim support for macOS - #4532. Thanks @johnelliott!", "[Fixed] Open in Shell on Linux ensures Git is available on the user's PATH - #4619. Thanks @ziggy42!", "[Fixed] Keyboard focus issues when navigating Pull Request list - #4673", "[Improved] Automatically add valid repository when using command line interface - #4513. Thanks @ggajos!" ], "1.1.2-test5": ["Actually upgrading fs-extra to v6 in the app"], "1.1.2-test4": ["Upgrading fs-extra to v6"], "1.1.2-beta5": [ "[Added] Syntax highlighting for JavaServer Pages (JSP) - #4470. Thanks @damaneice!", "[Fixed] Prevent icon from shrinking in rename dialog - #4566" ], "1.1.2-beta4": [ "[New] New Compare tab allowing visualization of the relationship between branches", "[New] Support for selecting more than one file in the changes list - #1712. Thanks @icosamuel!", "[Fixed] 'Select All' shortcut now works for changes list - #3821", "[Improved] Always fast-forward the default branch - #4506", "[Improved] Warn when trying to rename a published branch - #4035. Thanks @agisilaos!", "[Improved] Added context menu for files in commit history - #2845. Thanks @crea7or", "[Improved] Discarding all changes always prompts for confirmation - #4459" ], "1.1.2-beta3": [ "[Added] Syntax highlighting for Haxe files - #4445. Thanks @Gama11!", "[Added] Syntax highlighting for R files - #4455. Thanks @say25!", "[Fixed] Fetch to ensure \"Open in Desktop\" has a branch to checkout - #3006", "[Fixed] Handle the click event when opening a binary file - #4446", "[Fixed] Skip fast-forwarding when there are a lot of eligible local branches - #4392", "[Fixed] Image diffs not working for files with upper-case file extension - #4466", "[Fixed] Syntax highlighting not working for files with upper-case file extension - #4462. Thanks @say25!", "[Improved] Getting list of changed files is now more efficient when dealing with thousands of files - #4443", "[Improved] Checking out a Pull Request may skip unnecessary fetch - #4068. Thanks @agisilaos!", "[Improved] Commit summary now has a hint to indicate why committing is disabled - #4429." ], "1.1.2-test3": ["[New] Comparison Branch demo build"], "1.1.2-test2": [ "Refactoring the diff internals to potentially land some SVG improvements" ], "1.1.2-test1": [ "Refactoring the diff internals to potentially land some SVG improvements" ], "1.1.2-beta2": [ "[New] Render bitmap images in diffs - #4367. Thanks @MagicMarvMan!", "[New] Add PowerShell Core support for Windows and macOS - #3791. Thanks @saschanaz!", "[Fixed] Error when creating Git LFS progress causes clone to fail - #4307. Thanks @MagicMarvMan!", "[Fixed] 'Open File in External Editor' does not use existing window - #4381", "[Fixed] Always ask for confirmation when discarding all changes - #4423", "[Improved] Pull request status text now matches format on GitHub - #3521", "[Improved] Add escape hatch to disable hardware acceleration when launching - #3921" ], "1.1.2-beta1": [], "1.1.1": [ "[New] Render WebP images in diffs - #4164. Thanks @agisilaos!", "[Fixed] Edit context menus in commit form input elements - #3886", "[Fixed] Escape behavior for Pull Request list does not match Branch List - #3597", "[Fixed] Keep caret position after inserting completion for emoji/mention - #3835. Thanks @CarlRosell!", "[Fixed] Handle error events when watching files used to get Git LFS output - #4117", "[Fixed] Potential race condition when opening a fork pull request - #4149", "[Fixed] Show placeholder image when no pull requests found - #3973", "[Fixed] Disable commit summary and description inputs while commit in progress - #3893. Thanks @crea7or!", "[Fixed] Ensure pull request cache is cleared after last pull request merged - #4122", "[Fixed] Focus two-factor authentication dialog on input - #4220. Thanks @WaleedAshraf!", "[Fixed] Branches button no longer disabled while on an unborn branch - #4236. Thanks @agisilaos!", "[Fixed] Delete gitignore file when all entries cleared in Repository Settings - #1896", "[Fixed] Add visual indicator that a folder can be dropped on Desktop - #4004. Thanks @agisilaos!", "[Fixed] Attempt to focus the application window on macOS after signing in via the browser - #4126", "[Fixed] Refresh issues when user manually fetches - #4076", "[Improved] Add `Discard All Changes...` to context menu on changed file list - #4197. Thanks @xamm!", "[Improved] Improve contrast for button labels in app toolbar - #4219", "[Improved] Speed up check for submodules when discarding - #4186. Thanks @kmscode!", "[Improved] Make the keychain known issue more clear within Desktop - #4125", "[Improved] Continue past the 'diff too large' message and view the diff - #4050", "[Improved] Repository association might not have expected prefix - #4090. Thanks @mathieudutour!", "[Improved] Add message to gitignore dialog when not on default branch - #3720", "[Improved] Hide Desktop-specific forks in Branch List - #4127", "[Improved] Disregard accidental whitespace when cloning a repository by URL - #4216", "[Improved] Show alert icon in repository list when repository not found on disk - #4254. Thanks @gingerbeardman!", "[Improved] Repository list now closes after removing last repository - #4269. Thanks @agisilaos!", "[Improved] Move forget password link after the password dialog to match expected tab order - #4283. Thanks @iamnapo!", "[Improved] More descriptive text in repository toolbar button when no repositories are tracked - #4268. Thanks @agisilaos!", "[Improved] Context menu in Changes tab now supports opening file in your preferred editor - #4030" ], "1.1.1-beta4": [ "[Improved] Context menu in Changes tab now supports opening file in your preferred editor - #4030" ], "1.1.1-beta3": [], "1.1.1-beta2": [ "[New] Render WebP images in diffs - #4164. Thanks @agisilaos!", "[Fixed] Edit context menus in commit form input elements - #3886", "[Fixed] Escape behavior should match that of Branch List - #3972", "[Fixed] Keep caret position after inserting completion - #3835. Thanks @CarlRosell!", "[Fixed] Handle error events when watching files used to get Git LFS output - #4117", "[Fixed] Potential race condition when opening a fork pull request - #4149", "[Fixed] Show placeholder image when no pull requests found - #3973", "[Fixed] Disable input fields summary and description while commit in progress - #3893. Thanks @crea7or!", "[Fixed] Ensure pull request cache is cleared after last pull request merged - #4122", "[Fixed] Focus two-factor authentication dialog on input - #4220. Thanks @WaleedAshraf!", "[Fixed] Branches button no longer disabled while on an unborn branch - #4236. Thanks @agisilaos!", "[Fixed] Delete gitignore file when entries cleared in Repository Settings - #1896", "[Fixed] Add visual indicator that a folder can be dropped on Desktop - #4004. Thanks @agisilaos!", "[Improved] Add `Discard All Changes...` to context menu on changed file list - #4197. Thanks @xamm!", "[Improved] Improve contrast for button labels in app toolbar - #4219", "[Improved] Speed up check for submodules when discarding - #4186. Thanks @kmscode!", "[Improved] Make the keychain known issue more clear within Desktop - #4125", "[Improved] Continue past the 'diff too large' message and view the diff - #4050", "[Improved] Repository association might not have expected prefix - #4090. Thanks @mathieudutour!", "[Improved] Add message to gitignore dialog when not on default branch - #3720", "[Improved] Hide Desktop-specific forks in Branch List - #4127", "[Improved] Disregard accidental whitespace when cloning a repository by URL - #4216", "[Improved] Show alert icon in repository list when repository not found on disk - #4254. Thanks @gingerbeardman!", "[Improved] Repository list now closes after removing last repository - #4269. Thanks @agisilaos!", "[Improved] Move forget password link to after the password dialog to maintain expected tab order - #4283. Thanks @iamnapo!", "[Improved] More descriptive text in repository toolbar button when no repositories are tracked - #4268. Thanks @agisilaos!" ], "1.1.1-test2": ["[Improved] Electron 1.8.3 upgrade (again)"], "1.1.1-test1": [ "[Improved] Forcing a focus on the window after the OAuth dance is done" ], "1.1.1-beta1": [], "1.1.0": [ "[New] Check out pull requests from collaborators or forks from within Desktop", "[New] View the commit status of the branch when it has an open pull request", "[Added] Add RubyMine support for macOS - #3883. Thanks @gssbzn!", "[Added] Add TextMate support for macOS - #3910. Thanks @caiofbpa!", "[Added] Syntax highlighting for Elixir files - #3774. Thanks @joaovitoras!", "[Fixed] Update layout of branch blankslate image - #4011", "[Fixed] Expanded avatar stack in commit summary gets cut off - #3884", "[Fixed] Clear repository filter when switching tabs - #3787. Thanks @reyronald!", "[Fixed] Avoid crash when unable to launch shell - #3954", "[Fixed] Ensure renames are detected when viewing commit diffs - #3673", "[Fixed] Fetch default remote if it differs from the current - #4056", "[Fixed] Handle Git errors when .gitmodules are malformed - #3912", "[Fixed] Handle error when \"where\" is not on PATH - #3882 #3825", "[Fixed] Ignore action assumes CRLF when core.autocrlf is unset - #3514", "[Fixed] Prevent duplicate entries in co-author autocomplete list - #3887", "[Fixed] Renames not detected when viewing commit diffs - #3673", "[Fixed] Support legacy usernames as co-authors - #3897", "[Improved] Update branch button text from \"New\" to \"New Branch\" - #4032", "[Improved] Add fuzzy search in the repository, branch, PR, and clone FilterLists - #911. Thanks @j-f1!", "[Improved] Tidy up commit summary and description layout in commit list - #3922. Thanks @willnode!", "[Improved] Use smaller default size when rendering Gravatar avatars - #3911", "[Improved] Show fetch progress when initializing remote for fork - #3953", "[Improved] Remove references to Hubot from the user setup page - #4015. Thanks @j-f1!", "[Improved] Error handling around ENOENT - #3954", "[Improved] Clear repository filter text when switching tabs - #3787. Thanks @reyronald!", "[Improved] Allow window to accept single click on focus - #3843", "[Improved] Disable drag-and-drop interaction when a popup is in the foreground - #3996" ], "1.1.0-beta3": [ "[Fixed] Fetch default remote if it differs from the current - #4056" ], "1.1.0-beta2": [ "[Improved] Update embedded Git to improve error handling when using stdin - #4058" ], "1.1.0-beta1": [ "[Improved] Add 'Branch' to 'New' branch button - #4032", "[Improved] Remove references to Hubot from the user setup page - #4015. Thanks @j-f1!" ], "1.0.14-beta5": [ "[Fixed] Improve detection of pull requests associated with current branch - #3991", "[Fixed] Disable drag-and-drop interaction when a popup is in the foreground - #3996", "[Fixed] Branch blank slate image out of position - #4011" ], "1.0.14-beta4": [ "[New] Syntax highlighting for Elixir files - #3774. Thanks @joaovitoras!", "[Fixed] Crash when unable to launch shell - #3954", "[Fixed] Support legacy usernames as co-authors - #3897", "[Improved] Enable fuzzy search in the repository, branch, PR, and clone FilterLists - #911. Thanks @j-f1!", "[Improved] Tidy up commit summary and description layout in commit list - #3922. Thanks @willnode!" ], "1.0.14-test1": ["[Improved] Electron 1.8.2 upgrade"], "1.0.14-beta3": [ "[Added] Add TextMate support for macOS - #3910. Thanks @caiofbpa!", "[Fixed] Handle Git errors when .gitmodules are malformed - #3912", "[Fixed] Clear repository filter when switching tabs - #3787. Thanks @reyronald!", "[Fixed] Prevent duplicate entries in co-author autocomplete list - #3887", "[Improved] Show progress when initializing remote for fork - #3953" ], "1.0.14-beta2": [ "[Added] Add RubyMine support for macOS - #3883. Thanks @gssbzn!", "[Fixed] Allow window to accept single click on focus - #3843", "[Fixed] Expanded avatar list hidden behind commit details - #3884", "[Fixed] Renames not detected when viewing commit diffs - #3673", "[Fixed] Ignore action assumes CRLF when core.autocrlf is unset - #3514", "[Improved] Use smaller default size when rendering Gravatar avatars - #3911" ], "1.0.14-beta1": ["[New] Commit together with co-authors - #3879"], "1.0.13": [ "[New] Commit together with co-authors - #3879", "[New] PhpStorm is now a supported external editor on macOS - #3749. Thanks @hubgit!", "[Improved] Update embedded Git to 2.16.1 - #3617 #3828 #3871", "[Improved] Blank slate view is now more responsive when zoomed - #3777", "[Improved] Documentation fix for Open in Shell resource - #3799. Thanks @saschanaz!", "[Improved] Improved error handling for Linux - #3732", "[Improved] Allow links in unexpanded summary to be clickable - #3719. Thanks @koenpunt!", "[Fixed] Update Electron to 1.7.11 to address security issue - #3846", "[Fixed] Allow double dashes in branch name - #3599. Thanks @JQuinnie!", "[Fixed] Sort the organization list - #3657. Thanks @j-f1!", "[Fixed] Check out PRs from a fork - #3395", "[Fixed] Confirm deleting branch when it has an open PR - #3615", "[Fixed] Defer user/email validation in Preferences - #3722", "[Fixed] Checkout progress did not include branch name - #3780", "[Fixed] Don't block branch switching when in detached HEAD - #3807", "[Fixed] Handle discarding submodule changes properly - #3647", "[Fixed] Show tooltip with additional info about the build status - #3134", "[Fixed] Update placeholders to support Linux distributions - #3150", "[Fixed] Refresh local commit list when switching tabs - #3698" ], "1.0.13-test1": [ "[Improved] Update embedded Git to 2.16.1 - #3617 #3828 #3871", "[Fixed] Update Electron to 1.7.11 to address security issue - #3846", "[Fixed] Allows double dashes in branch name - #3599. Thanks @JQuinnie!", "[Fixed] Pull Request store may not have status defined - #3869", "[Fixed] Render the Pull Request badge when no commit statuses found - #3608" ], "1.0.13-beta1": [ "[New] PhpStorm is now a supported external editor on macOS - #3749. Thanks @hubgit!", "[Improved] Blank slate view is now more responsive when zoomed - #3777", "[Improved] Documentation fix for Open in Shell resource - #3799. Thanks @saschanaz!", "[Improved] Improved error handling for Linux - #3732", "[Improved] Allow links in unexpanded summary to be clickable - #3719. Thanks @koenpunt!", "[Fixed] Sort the organization list - #3657. Thanks @j-f1!", "[Fixed] Check out PRs from a fork - #3395", "[Fixed] Confirm deleting branch when it has an open PR - #3615", "[Fixed] Defer user/email validation in Preferences - #3722", "[Fixed] Checkout progress did not include branch name - #3780", "[Fixed] Don't block branch switching when in detached HEAD - #3807", "[Fixed] Handle discarding submodule changes properly - #3647", "[Fixed] Show tooltip with additional info about the build status - #3134", "[Fixed] Update placeholders to support Linux distributions - #3150", "[Fixed] Refresh local commit list when switching tabs - #3698" ], "1.0.12": [ "[New] Syntax highlighting for Rust files - #3666. Thanks @subnomo!", "[New] Syntax highlighting for Clojure cljc, cljs, and edn files - #3610. Thanks @mtkp!", "[Improved] Prevent creating a branch in the middle of a merge - #3733", "[Improved] Truncate long repo names in panes and modals to fit into a single line - #3598. Thanks @http-request!", "[Improved] Keyboard navigation support in pull request list - #3607", "[Fixed] Inconsistent caret behavior in text boxes when using certain keyboard layouts - #3354", "[Fixed] Only render the organizations list when it has orgs - #1414", "[Fixed] Checkout now handles situations where a ref exists on multiple remotes - #3281", "[Fixed] Retain accounts on desktop when losing connectivity - #3641", "[Fixed] Missing argument in FullScreenInfo that could prevent app from launching - #3727. Thanks @OiYouYeahYou!" ], "1.0.12-beta1": [ "[New] Syntax highlighting for Rust files - #3666. Thanks @subnomo!", "[New] Syntax highlighting for Clojure cljc, cljs, and edn files - #3610. Thanks @mtkp!", "[Improved] Prevent creating a branch in the middle of a merge - #3733", "[Improved] Truncate long repo names in panes and modals to fit into a single line - #3598. Thanks @http-request!", "[Improved] Keyboard navigation support in pull request list - #3607", "[Fixed] Inconsistent caret behavior in text boxes when using certain keyboard layouts - #3354", "[Fixed] Only render the organizations list when it has orgs - #1414", "[Fixed] Checkout now handles situations where a ref exists on multiple remotes - #3281", "[Fixed] Retain accounts on desktop when losing connectivity - #3641", "[Fixed] Missing argument in FullScreenInfo that could prevent app from launching - #3727. Thanks @OiYouYeahYou!" ], "1.0.12-beta0": [ "[New] Highlight substring matches in the \"Branches\" and \"Repositories\" list when filtering - #910. Thanks @JordanMussi!", "[New] Add preview for ico files - #3531. Thanks @serhiivinichuk!", "[New] Fallback to Gravatar for loading avatars - #821", "[New] Provide syntax highlighting for Visual Studio project files - #3552. Thanks @saul!", "[New] Provide syntax highlighting for F# fsx and fsi files - #3544. Thanks @saul!", "[New] Provide syntax highlighting for Kotlin files - #3555. Thanks @ziggy42!", "[New] Provide syntax highlighting for Clojure - #3523. Thanks @mtkp!", "[Improved] Toggle the \"Repository List\" from the menu - #2638. Thanks @JordanMussi!", "[Improved] Prevent saving of disallowed character strings for your name and email - #3204", "[Improved] Error messages now appear at the top of the \"Create a New Repository\" dialog - #3571. Thanks @http-request!", "[Improved] \"Repository List\" header is now \"Github.com\" for consistency - #3567. Thanks @iFun!", "[Improved] Rename the \"Install Update\" button to \"Quit and Install Update\" - #3494. Thanks @say25!", "[Fixed] Fix ordering of commit history when your branch and tracking branch have both changed - #2737", "[Fixed] Prevent creating a branch that starts with a period - #3013. Thanks @JordanMussi!", "[Fixed] Branch names are properly encoded when creating a pull request - #3509", "[Fixed] Re-enable all the menu items after closing a popup - #3533", "[Fixed] Removes option to delete remote branch after it's been deleted - #2964. Thanks @JordanMussi!", "[Fixed] Windows: Detects available editors and shells now works even when the group policy blocks write registry access - #3105 #3405", "[Fixed] Windows: Menu items are no longer truncated - #3547", "[Fixed] Windows: Prevent disabled menu items from being accessed - #3391 #1521", "[Fixed] Preserve the selected pull request when a manual fetch is done - #3524", "[Fixed] Update pull request badge after switching branches or pull requests - #3454", "[Fixed] Restore keyboard arrow navigation for pull request list - #3499" ], "1.0.11": [ "[New] Highlight substring matches in the \"Branches\" and \"Repositories\" list when filtering - #910. Thanks @JordanMussi!", "[New] Add preview for ico files - #3531. Thanks @serhiivinichuk!", "[New] Fallback to Gravatar for loading avatars - #821", "[New] Provide syntax highlighting for Visual Studio project files - #3552. Thanks @saul!", "[New] Provide syntax highlighting for F# fsx and fsi files - #3544. Thanks @saul!", "[New] Provide syntax highlighting for Kotlin files - #3555. Thanks @ziggy42!", "[New] Provide syntax highlighting for Clojure - #3523. Thanks @mtkp!", "[Improved] Toggle the \"Repository List\" from the menu - #2638. Thanks @JordanMussi!", "[Improved] Prevent saving of disallowed character strings for your name and email - #3204", "[Improved] Error messages now appear at the top of the \"Create a New Repository\" dialog - #3571. Thanks @http-request!", "[Improved] \"Repository List\" header is now \"Github.com\" for consistency - #3567. Thanks @iFun!", "[Improved] Rename the \"Install Update\" button to \"Quit and Install Update\" - #3494. Thanks @say25!", "[Fixed] Fix ordering of commit history when your branch and tracking branch have both changed - #2737", "[Fixed] Prevent creating a branch that starts with a period - #3013. Thanks @JordanMussi!", "[Fixed] Branch names are properly encoded when creating a pull request - #3509", "[Fixed] Re-enable all the menu items after closing a popup - #3533", "[Fixed] Removes option to delete remote branch after it's been deleted - #2964. Thanks @JordanMussi!", "[Fixed] Windows: Detects available editors and shells now works even when the group policy blocks write registry access - #3105 #3405", "[Fixed] Windows: Menu items are no longer truncated - #3547", "[Fixed] Windows: Prevent disabled menu items from being accessed - #3391 #1521" ], "1.0.11-test0": [ "[Improved] now with a new major version of electron-packager" ], "1.0.11-beta0": [ "[Improved] Refresh the pull requests list after fetching - #3503", "[Improved] Rename the \"Install Update\" button to \"Quit and Install Update\" - #3494. Thanks @say25!", "[Fixed] URL encode branch names when creating a pull request - #3509", "[Fixed] Windows: detecting available editors and shells now works even when the group policy blocks write registry access - #3105 #3405" ], "1.0.10": [ "[New] ColdFusion Builder is now a supported external editor - #3336 #3321. Thanks @AtomicCons!", "[New] VSCode Insiders build is now a supported external editor - #3441. Thanks @say25!", "[New] BBEdit is now a supported external editor - #3467. Thanks @NiklasBr!", "[New] Hyper is now a supported shell on Windows too - #3455. Thanks @JordanMussi!", "[New] Swift is now syntax highlighted - #3305. Thanks @agisilaos!", "[New] Vue.js is now syntax highlighted - #3368. Thanks @wanecek!", "[New] CoffeeScript is now syntax highlighted - #3356. Thanks @agisilaos!", "[New] Cypher is now syntax highlighted - #3440. Thanks @say25!", "[New] .hpp is now syntax highlighted as C++ - #3420. Thanks @say25!", "[New] ML-like languages are now syntax highlighted - #3401. Thanks @say25!", "[New] Objective-C is now syntax highlighted - #3355. Thanks @koenpunt!", "[New] SQL is now syntax highlighted - #3389. Thanks @say25!", "[Improved] Better message on the 'Publish Branch' button when HEAD is unborn - #3344. Thanks @Venkat5694!", "[Improved] Better error message when trying to push to an archived repository - #3084. Thanks @agisilaos!", "[Improved] Avoid excessive background fetching when switching repositories - #3329", "[Improved] Ignore menu events sent when a modal is shown - #3308", "[Fixed] Parse changed files whose paths include a newline - #3271", "[Fixed] Parse file type changes - #3334", "[Fixed] Windows: 'Open without Git' would present the dialog again instead of actually opening a shell without git - #3290", "[Fixed] Avoid text selection when dragging resizable dividers - #3268", "[Fixed] Windows: Removed the title attribute on the Windows buttons so that they no longer leave their tooltips hanging around - #3348. Thanks @j-f1!", "[Fixed] Windows: Detect VS Code when installed to non-standard locations - #3304", "[Fixed] Hitting Return would select the first item in a filter list when the filter text was empty - #3447", "[Fixed] Add some missing keyboard shortcuts - #3327. Thanks @say25!", "[Fixed] Handle \"304 Not Modified\" responses - #3399", "[Fixed] Don't overwrite an existing .gitattributes when creating a new repository - #3419. Thanks @strafe!" ], "1.0.10-beta3": [ "[New] Change \"Create Pull Request\" to \"Show Pull Request\" when there is already a pull request open for the branch - #2524", "[New] VSCode Insiders build is now a supported external editor - #3441. Thanks @say25!", "[New] BBEdit is now a supported external editor - #3467. Thanks @NiklasBr!", "[New] Hyper is now a supported shell - #3455. Thanks @JordanMussi!", "[New] Cypher is now syntax highlighted - #3440. Thanks @say25!", "[New] .hpp is now syntax highlighted as C++ - #3420. Thanks @say25!", "[New] ML-like languages are now syntax highlighted - #3401. Thanks @say25!", "[Improved] Use the same colors in pull request dropdown as we use on GitHub.com - #3451", "[Improved] Fancy pull request loading animations - #2868", "[Improved] Avoid excessive background fetching when switching repositories - #3329", "[Improved] Refresh the pull request list when the Push/Pull/Fetch button is clicked - #3448", "[Improved] Ignore menu events sent when a modal is shown - #3308", "[Fixed] Hitting Return would select the first item in a filter list when the filter text was empty - #3447", "[Fixed] Add some missing keyboard shortcuts - #3327. Thanks @say25!", "[Fixed] Handle \"304 Not Modified\" responses - #3399", "[Fixed] Don't overwrite an existing .gitattributes when creating a new repository - #3419. Thanks @strafe!" ], "1.0.10-beta2": [ "[New] SQL is now syntax highlighted! - #3389. Thanks @say25!", "[Fixed] Windows: Detect VS Code when installed to non-standard locations - #3304" ], "1.0.10-beta1": [ "[New] Vue.js code is now syntax highlighted! - #3368. Thanks @wanecek!", "[New] CoffeeScript is now syntax highlighted! - #3356. Thanks @agisilaos!", "[New] Highlight .m as Objective-C - #3355. Thanks @koenpunt!", "[Improved] Use smarter middle truncation for branch names - #3357", "[Fixed] Windows: Removed the title attribute on the Windows buttons so that they no longer leave their tooltips hanging around - #3348. Thanks @j-f1!" ], "1.0.10-beta0": [ "[New] ColdFusion Builder is now available as an option for External Editor - #3336 #3321. Thanks @AtomicCons!", "[New] Swift code is now syntax highlighted - #3305. Thanks @agisilaos!", "[Improved] Better message on the 'Publish Branch' button when HEAD is unborn - #3344. Thanks @Venkat5694!", "[Improved] Better error message when trying to push to an archived repository - #3084. Thanks @agisilaos!", "[Fixed] Parse changed files whose paths include a newline - #3271", "[Fixed] Parse file type changes - #3334", "[Fixed] Windows: 'Open without Git' would present the dialog again instead of actually opening a shell without git - #3290", "[Fixed] Avoid text selection when dragging resizable dividers - #3268" ], "1.0.9": [ "[New] ColdFusion Builder is now available as an option for External Editor - #3336 #3321. Thanks @AtomicCons!", "[New] Swift code is now syntax highlighted - #3305. Thanks @agisilaos!", "[Improved] Better message on the 'Publish Branch' button when HEAD is unborn - #3344. Thanks @Venkat5694!", "[Improved] Better error message when trying to push to an archived repository - #3084. Thanks @agisilaos!", "[Fixed] Parse changed files whose paths include a newline - #3271", "[Fixed] Parse file type changes - #3334", "[Fixed] Windows: 'Open without Git' would present the dialog again instead of actually opening a shell without git - #3290", "[Fixed] Avoid text selection when dragging resizable dividers - #3268" ], "1.0.9-beta1": [ "[New] ColdFusion Builder is now available as an option for External Editor - #3336 #3321. Thanks @AtomicCons!", "[New] Swift code is now syntax highlighted - #3305. Thanks @agisilaos!", "[Improved] Better message on the 'Publish Branch' button when HEAD is unborn - #3344. Thanks @Venkat5694!", "[Improved] Better error message when trying to push to an archived repository - #3084. Thanks @agisilaos!", "[Fixed] Parse changed files whose paths include a newline - #3271", "[Fixed] Parse file type changes - #3334", "[Fixed] Windows: 'Open without Git' would present the dialog again instead of actually opening a shell without git - #3290", "[Fixed] Avoid text selection when dragging resizable dividers - #3268" ], "1.0.9-beta0": [ "[Fixed] Crash when rendering diffs for certain types of files - #3249", "[Fixed] Continually being prompted to add the upstream remote, even when it already exists - #3252" ], "1.0.8": [ "[Fixed] Crash when rendering diffs for certain types of files - #3249", "[Fixed] Continually being prompted to add the upstream remote, even when it already exists - #3252" ], "1.0.8-beta0": [ "[New] Syntax highlighted diffs - #3101", "[New] Add upstream to forked repositories - #2364", "[Fixed] Only reset scale of title bar on macOS - #3193", "[Fixed] Filter symbolic refs in the branch list - #3196", "[Fixed] Address path issue with invoking Git Bash - #3186", "[Fixed] Update embedded Git to support repository hooks and better error messages - #3067 #3079", "[Fixed] Provide credentials to LFS repositories when performing checkout - #3167", "[Fixed] Assorted changelog typos - #3174 #3184 #3207. Thanks @strafe, @alanaasmaa and @jt2k!" ], "1.0.7": [ "[New] Syntax highlighted diffs - #3101", "[New] Add upstream to forked repositories - #2364", "[Fixed] Only reset scale of title bar on macOS - #3193", "[Fixed] Filter symbolic refs in the branch list - #3196", "[Fixed] Address path issue with invoking Git Bash - #3186", "[Fixed] Update embedded Git to support repository hooks and better error messages - #3067 #3079", "[Fixed] Provide credentials to LFS repositories when performing checkout - #3167", "[Fixed] Assorted changelog typos - #3174 #3184 #3207. Thanks @strafe, @alanaasmaa and @jt2k!" ], "1.0.7-beta0": [ "[Fixed] The Branches list wouldn't display the branches for non-GitHub repositories - #3169", "[Fixed] Pushing or pulling could error when the temp directory was unavailable - #3046" ], "1.0.6": [ "[Fixed] The Branches list wouldn't display the branches for non-GitHub repositories - #3169", "[Fixed] Pushing or pulling could error when the temp directory was unavailable - #3046" ], "1.0.5": [ "[New] The command line interface now provides some helpful help! - #2372. Thanks @j-f1!", "[New] Create new branches from the Branches foldout - #2784", "[New] Add support for VSCode Insiders - #3012 #3062. Thanks @MSathieu!", "[New] Linux: Add Atom and Sublime Text support - #3133. Thanks @ziggy42!", "[New] Linux: Tilix support - #3117. Thanks @ziggy42!", "[New] Linux: Add Visual Studio Code support - #3122. Thanks @ziggy42!", "[Improved] Report errors when a problem occurs storing tokens - #3159", "[Improved] Bump to Git 2.14.3 - #3146", "[Improved] Don't try to display diffs that could cause the app to hang - #2596", "[Fixed] Handle local user accounts with URL-hostile characters - #3107", "[Fixed] Cloning a repository which uses Git LFS would leave all the files appearing modified - #3146", "[Fixed] Signing in in the Welcome flow could hang - #2769", "[Fixed] Properly replace old Git LFS configuration values - #2984" ], "1.0.5-beta1": [ "[New] Create new branches from the Branches foldout - #2784", "[New] Add support for VSCode Insiders - #3012 #3062. Thanks @MSathieu!", "[New] Linux: Add Atom and Sublime Text support - #3133. Thanks @ziggy42!", "[New] Linux: Tilix support - #3117. Thanks @ziggy42!", "[New] Linux: Add Visual Studio Code support - #3122. Thanks @ziggy42!", "[Improved] Report errors when a problem occurs storing tokens - #3159", "[Improved] Bump to Git 2.14.3 - #3146", "[Improved] Don't try to display diffs that could cause the app to hang - #2596", "[Fixed] Handle local user accounts with URL-hostile characters - #3107", "[Fixed] Cloning a repository which uses Git LFS would leave all the files appearing modified - #3146", "[Fixed] Signing in in the Welcome flow could hang - #2769", "[Fixed] Properly replace old Git LFS configuration values - #2984" ], "1.0.5-test1": [], "1.0.5-test0": [], "1.0.5-beta0": [ "[New] The command line interface now provides some helpful help! - #2372. Thanks @j-f1!" ], "1.0.4": [ "[New] Report Git LFS progress when cloning, pushing, pulling, or reverting - #2226", "[Improved] Increased diff contrast and and line gutter selection - #2586 #2181", "[Improved] Clarify why publishing a branch is disabled in various scenarios - #2773", "[Improved] Improved error message when installing the command Line tool fails - #2979. Thanks @agisilaos!", "[Improved] Format the branch name in \"Create Branch\" like we format branch names elsewhere - #2977. Thanks @j-f1!", "[Fixed] Avatars not updating after signing in - #2911", "[Fixed] Lots of bugs if there was a file named \"HEAD\" in the repository - #3009 #2721 #2938", "[Fixed] Handle duplicate config values when saving user.name and user.email - #2945", "[Fixed] The \"Create without pushing\" button when creating a new pull request wouldn't actually do anything - #2917" ], "1.0.4-beta1": [ "[New] Report Git LFS progress when cloning, pushing, pulling, or reverting - #2226", "[Improved] Increased diff contrast and and line gutter selection - #2586 #2181", "[Improved] Clarify why publishing a branch is disabled in various scenarios - #2773", "[Improved] Improved error message when installing the command Line tool fails - #2979. Thanks @agisilaos!", "[Improved] Format the branch name in \"Create Branch\" like we format branch names elsewhere - #2977. Thanks @j-f1!", "[Fixed] Avatars not updating after signing in - #2911", "[Fixed] Lots of bugs if there was a file named \"HEAD\" in the repository - #3009 #2721 #2938", "[Fixed] Handle duplicate config values when saving user.name and user.email - #2945", "[Fixed] The \"Create without pushing\" button when creating a new pull request wouldn't actually do anything - #2917 #2917" ], "1.0.4-beta0": [ "[Improved] Increase the contrast of the modified file status octicons - #2914", "[Fixed] Showing changed files in Finder/Explorer would open the file - #2909", "[Fixed] macOS: Fix app icon on High Sierra - #2915", "[Fixed] Cloning an empty repository would fail - #2897 #2906", "[Fixed] Catch logging exceptions - #2910" ], "1.0.3": [ "[Improved] Increase the contrast of the modified file status octicons - #2914", "[Fixed] Showing changed files in Finder/Explorer would open the file - #2909", "[Fixed] macOS: Fix app icon on High Sierra - #2915", "[Fixed] Cloning an empty repository would fail - #2897 #2906", "[Fixed] Catch logging exceptions - #2910" ], "1.0.2": [ "[Improved] Better message for GitHub Enterprise users when there is a network error - #2574. Thanks @agisilaos!", "[Improved] Clone error message now suggests networking might be involved - #2872. Thanks @agisilaos!", "[Improved] Include push/pull progress information in the push/pull button tooltip - #2879", "[Improved] Allow publishing a brand new, empty repository - #2773", "[Improved] Make file paths in lists selectable - #2801. Thanks @artivilla!", "[Fixed] Disable LFS hook creation when cloning - #2809", "[Fixed] Use the new URL for the \"Show User Guides\" menu item - #2792. Thanks @db6edr!", "[Fixed] Make the SHA selectable when viewing commit details - #1154", "[Fixed] Windows: Make `github` CLI work in Git Bash - #2712", "[Fixed] Use the initial path provided when creating a new repository - #2883", "[Fixed] Windows: Avoid long path limits when discarding changes - #2833", "[Fixed] Files would get deleted when undoing the first commit - #2764", "[Fixed] Find the repository root before adding it - #2832", "[Fixed] Display warning about an existing folder before cloning - #2777 #2830", "[Fixed] Show contents of directory when showing a repository from Show in Explorer/Finder instead of showing the parent - #2798" ], "1.0.2-beta1": [ "[Improved] Clone error message now suggests networking might be involved - #2872. Thanks @agisilaos!", "[Improved] Include push/pull progress information in the push/pull button tooltip - #2879", "[Improved] Allow publishing a brand new, empty repository - #2773", "[Improved] Make file paths in lists selectable - #2801. Thanks @artivilla!", "[Fixed] Use the initial path provided when creating a new repository - #2883", "[Fixed] Windows: Avoid long path limits when discarding changes - #2833", "[Fixed] Files would get deleted when undoing the first commit - #2764", "[Fixed] Find the repository root before adding it - #2832", "[Fixed] Display warning about an existing folder before cloning - #2777 #2830", "[Fixed] Show contents of directory when showing a repository from Show in Explorer/Finder instead of showing the parent - #2798" ], "1.0.2-beta0": [ "[Improved] Message for GitHub Enterprise users when there is a network error - #2574. Thanks @agisilaos!", "[Fixed] Disable LFS hook creation when cloning - #2809", "[Fixed] Use the new URL for the \"Show User Guides\" menu item - #2792. Thanks @db6edr!", "[Fixed] Make the SHA selectable when viewing commit details - #1154", "[Fixed] Windows: Make `github` CLI work in Git Bash - #2712" ], "1.0.1": [ "[Improved] Message for GitHub Enterprise users when there is a network error - #2574. Thanks @agisilaos!", "[Fixed] Disable LFS hook creation when cloning - #2809", "[Fixed] Use the new URL for the \"Show User Guides\" menu item - #2792. Thanks @db6edr!", "[Fixed] Make the SHA selectable when viewing commit details - #1154", "[Fixed] Windows: Make `github` CLI work in Git Bash - #2712" ], "1.0.1-beta0": [ "[Fixed] Use the loading/disabled state while publishing - #1995", "[Fixed] Lock down menu item states for unborn repositories - #2744 #2573", "[Fixed] Windows: Detecting the available shells and editors when using a language other than English - #2735" ], "1.0.0": [ "[Fixed] Use the loading/disabled state while publishing - #1995", "[Fixed] Lock down menu item states for unborn repositories - #2744 #2573", "[Fixed] Windows: Detecting the available shells and editors when using a language other than English - #2735" ], "1.0.0-beta3": [ "[New] Allow users to create repositories with descriptions - #2719. Thanks @davidcelis!", "[New] Use `lfs clone` for faster cloning of LFS repositories - #2679", "[Improved] Prompt to override existing LFS filters - #2693", "[Fixed] Don't install LFS hooks when checking if a repo uses LFS - #2732", "[Fixed] Ensure nothing is staged as part of undoing the first commit - #2656", "[Fixed] \"Clone with Desktop\" wouldn't include the repository name in the path - #2704" ], "0.9.1": [ "[New] Allow users to create repositories with descriptions - #2719. Thanks @davidcelis!", "[New] Use `lfs clone` for faster cloning of LFS repositories - #2679", "[Improved] Prompt to override existing LFS filters - #2693", "[Fixed] Don't install LFS hooks when checking if a repo uses LFS - #2732", "[Fixed] Ensure nothing is staged as part of undoing the first commit - #2656", "[Fixed] \"Clone with Desktop\" wouldn't include the repository name in the path - #2704" ], "1.0.0-beta2": [ "[New] Allow users to create repositories with descriptions - #2719. Thanks @davidcelis!", "[New] Use `lfs clone` for faster cloning of LFS repositories - #2679", "[Improved] Prompt to override existing LFS filters - #2693", "[Fixed] Don't install LFS hooks when checking if a repo uses LFS - #2732", "[Fixed] Ensure nothing is staged as part of undoing the first commit - #2656", "[Fixed] \"Clone with Desktop\" wouldn't include the repository name in the path - #2704" ], "0.9.0": [ "[New] Allow users to create repositories with descriptions - #2719. Thanks @davidcelis!", "[New] Use `lfs clone` for faster cloning of LFS repositories - #2679", "[Improved] Prompt to override existing LFS filters - #2693", "[Fixed] Don't install LFS hooks when checking if a repo uses LFS - #2732", "[Fixed] Ensure nothing is staged as part of undoing the first commit - #2656", "[Fixed] \"Clone with Desktop\" wouldn't include the repository name in the path - #2704" ], "0.8.2": [ "[New] Ask to install LFS filters when an LFS repository is added - #2227", "[New] Clone GitHub repositories tab - #57", "[New] Option to opt-out of confirming discarding changes - #2681", "[Fixed] Long commit summary truncation - #1742", "[Fixed] Ensure the repository list is always enabled - #2648", "[Fixed] Windows: Detecting the available shells and editors when using a non-ASCII user encoding - #2624", "[Fixed] Clicking the \"Cancel\" button on the Publish Branch dialog - #2646", "[Fixed] Windows: Don't rely on PATH for knowing where to find chcp - #2678", "[Fixed] Relocating a repository now actually does that - #2685", "[Fixed] Clicking autocompletes inserts them - #2674", "[Fixed] Use shift for shortcut chord instead of alt - #2607", "[Fixed] macOS: \"Open in Terminal\" works with repositories with spaces in their path - #2682" ], "1.0.0-beta1": [ "[New] Option to to opt-out of confirming discarding changes - #2681", "[Fixed] Windows: Don't rely on PATH for knowing where to find chcp - #2678", "[Fixed] Relocating a repository now actually does that - #2685", "[Fixed] Clicking autocompletes inserts them - #2674", "[Fixed] Use shift for shortcut chord instead of alt - #2607", "[Fixed] macOS: \"Open in Terminal\" works with repositories with spaces in their path - #2682" ], "1.0.0-beta0": [ "[New] Ask to install LFS filters when an LFS repository is added - #2227", "[New] Clone GitHub repositories tab - #57", "[Fixed] Long commit summary truncation - #1742", "[Fixed] Ensure the repository list is always enabled - #2648", "[Fixed] Windows: Detecting the available shells and editors when using a non-ASCII user encoding - #2624", "[Fixed] Clicking the \"Cancel\" button on the Publish Branch dialog - #2646" ], "0.8.1": [ "[New] 'Open in Shell' now supports multiple shells - #2473", "[New] Windows: Enable adding self-signed certificates - #2581", "[Improved] Enhanced image diffs - #2383", "[Improved] Line diffs - #2461", "[Improved] Octicons updated - #2495", "[Improved] Adds ability to close repository list using shortcut - #2532", "[Improved] Switch default buttons in the Publish Branch dialog - #2515", "[Improved] Bring back \"Contact Support\" - #1472", "[Improved] Persist repository filter text after closing repository list - #2571", "[Improved] Redesigned example commit in the Welcome flow - #2141", "[Improved] Tidy up initial \"external editor\" experience - #2551", "[Fixed] 'Include All' checkbox not in sync with partial selection - #2493", "[Fixed] Copied text from diff removed valid characters - #2499", "[Fixed] Click-focus on Windows would dismiss dialog - #2488", "[Fixed] Branch list not rendered in app - #2531", "[Fixed] Git operations checking certificate store - #2520", "[Fixed] Properly identify repositories whose remotes have a trailing slash - #2584", "[Fixed] Windows: Fix launching the `github` command line tool - #2563", "[Fixed] Use the primary email address if it's public - #2244", "[Fixed] Local branch not checked out after clone - #2561", "[Fixed] Only the most recent 30 issues would autocomplete for GitHub Enterprise repositories - #2541", "[Fixed] Missing \"View on GitHub\" menu item for non-Gitub repositories - #2615", "[Fixed] New tab opened when pressing \"]\" for certain keyboard layouts - #2607", "[Fixed] Windows: Crash when exiting full screen - #1502", "[Fixed] Windows: Detecting the available shells and editors when using a non-ASCII user encoding - #2624", "[Fixed] Ensure the repository list is always accessible - #2648" ], "0.8.1-beta4": [ "[Improved] Persist repository filter text after closing repository list - #2571", "[Improved] Redesigned example commit in the Welcome flow - #2141", "[Improved] Tidy up initial \"external editor\" experience - #2551", "[Fixed] Missing \"View on GitHub\" menu item for non-Gitub repositories - #2615", "[Fixed] New tab opened when pressing \"]\" for certain keyboard layouts - #2607", "[Fixed] Windows: Crash when exiting full screen - #1502" ], "0.8.1-beta3": [ "[New] Windows: Enable adding self-signed certificates - #2581", "[Improved] Adds ability to close repository list using shortcut - #2532", "[Improved] Switch default buttons in the Publish Branch dialog - #2515", "[Improved] Bring back \"Contact Support\" - #1472", "[Fixed] Properly identify repositories whose remotes have a trailing slash - #2584", "[Fixed] Windows: Fix launching the `github` command line tool - #2563", "[Fixed] Use the primary email address if it's public - #2244", "[Fixed] Local branch not checked out after clone - #2561", "[Fixed] Only the most recent 30 issues would autocomplete for GitHub Enterprise repositories - #2541" ], "0.8.1-beta2": [ "[Fixed] Branch list not rendered in app - #2531", "[Fixed] Git operations checking certificate store - #2520" ], "0.8.1-beta1": [ "[New] 'Open in Shell' now supports multiple shells - #2473", "[Improved] Enhanced image diffs - #2383", "[Improved] Line diffs - #2461", "[Improved] Octicons updated - #2495", "[Fixed] 'Include All' checkbox not in sync with partial selection - #2493", "[Fixed] Copied text from diff removed valid characters - #2499", "[Fixed] Click-focus on Windows would dismiss dialog - #2488" ], "0.8.1-beta0": [], "0.8.0": [ "[New] Added commit context menu - #2434", "[New] Added 'Open in External Editor' - #2009", "[New] Can choose whether a branch should be deleted on the remote as well as locally - #2136", "[New] Support authenticating with non-GitHub servers - #852", "[New] Added the ability to revert a commit - #752", "[New] Added a keyboard shortcut for opening the repository in the shell - #2138", "[Improved] Copied diff text no longer includes the line changetype markers - #1499", "[Improved] Fetch if a push fails because they need to pull first - #2431", "[Improved] Discard changes performance - #1889", "[Fixed] Show 'Add Repository' dialog when repository is dragged onto the app - #2442", "[Fixed] Dialog component did not remove event handler - #2469", "[Fixed] Open in External Editor context menu - #2475", "[Fixed] Update to Git 2.14.1 to fix security vulnerability - #2432", "[Fixed] Recent branches disappearing after renaming a branch - #2426", "[Fixed] Changing the default branch on GitHub.com is now reflected in the app - #1489", "[Fixed] Swap around some callouts for no repositories - #2447", "[Fixed] Darker unfocused selection color - #1669", "[Fixed] Increase the max sidebar width - #1588", "[Fixed] Don't say \"Publish this branch to GitHub\" for non-GitHub repositories - #1498", "[Fixed] macOS: Protocol schemes not getting registered - #2429", "[Fixed] Patches which contain the \"no newline\" marker would fail to apply - #2123", "[Fixed] Close the autocompletion popover when it loses focus - #2358", "[Fixed] Clear the selected org when switching Publish Repository tabs - #2386", "[Fixed] 'Create Without Pushing' button throwing an exception while opening a pull request - #2368", "[Fixed] Windows: Don't removing the running app out from under itself when there are updates pending - #2373", "[Fixed] Windows: Respect `core.autocrlf` and `core.safeclrf` when modifying the .gitignore - #1535", "[Fixed] Windows: Fix opening the app from the command line - #2396" ], "0.7.3-beta5": [], "0.7.3-beta4": [], "0.7.3-beta3": [], "0.7.3-beta2": [], "0.7.3-beta1": [], "0.7.3-beta0": [], "0.7.2": ["[Fixed] Issues with auto-updating to 0.7.1."], "0.7.2-beta0": [], "0.7.1": [ "[Improved] Redesigned error and warning dialogs to be clearer - #2277", "[Improved] Create Pull Request dialog shows more feedback while it's working - #2265", "[Improved] Version text is now copiable - #1935", "[Fixed] Preserve existing GitHub API information when API requests fail - #2282", "[Fixed] Pass through error messages as received from the API - #2279", "[Fixed] The Pull and Create Pull Request menu items had the same shortcut - #2274", "[Fixed] Launching the `github` command line tool from a Fish shell - #2299", "[Fixed] Help menu items now work - #2314", "[Fixed] Windows: `github` command line tool not installing after updating - #2312", "[Fixed] Caret position jumping around while changing the path for adding a local repository - #2222", "[Fixed] Error dialogs being closed too easily - #2211", "[Fixed] Windows: Non-ASCII credentials were mangled - #189" ], "0.7.1-beta5": [ "[Improved] Redesigned error and warning dialogs to be clearer - #2277", "[Improved] Create Pull Request dialog shows more feedback while it's working - #2265", "[Fixed] Preserve existing GitHub API information when API requests fail - #2282", "[Fixed] Pass through error messages as received from the API - #2279", "[Fixed] The Pull and Create Pull Request menu items had the same shortcut - #2274", "[Fixed] Launching the `github` command line tool from a Fish shell - #2299", "[Fixed] Help menu items now work - #2314", "[Fixed] Windows: `github` command line tool not installing after updating - #2312", "[Fixed] Caret position jumping around while changing the path for adding a local repository - #2222", "[Fixed] Error dialogs being closed too easily - #2211", "[Fixed] Windows: Non-ASCII credentials were mangled - #189" ], "0.7.1-beta4": [], "0.7.1-beta3": [], "0.7.1-beta2": [], "0.7.1-beta1": [], "0.7.1-beta0": [ "[Improved] Redesigned error and warning dialogs to be clearer - #2277", "[Fixed] Preserve existing GitHub API information when API requests fail - #2282", "[Fixed] Pass through error messages as received from the API - #2279", "[Fixed] The Pull and Create Pull Request menu items had the same shortcut - #2274", "[Fixed] Launching the `github` command line tool from a Fish shell - #2299" ], "0.7.0": [ "[New] Added the Branch > Create Pull Request menu item - #2135", "[New] Added the `github` command line tool - #696", "[Improved] Better error message when publishing a repository fails - #2089", "[Improved] Windows: Don't recreate the desktop shortcut if it's been deleted - #1759", "[Fixed] Cloning a repository's wiki - #1624", "[Fixed] Don't call GitHub Enterprise GitHub.com - #2094", "[Fixed] Don't push after publishing a new repository if the branch is unborn - #2086", "[Fixed] Don't close dialogs when clicking the title bar - #2056", "[Fixed] Windows: Clicking 'Show in Explorer' doesn't bring Explorer to the front - #2127", "[Fixed] Windows: Opening links doesn't bring the browser to the front - #1945", "[Fixed] macOS: Closing the window wouldn't exit fullscreen - #1901", "[Fixed] Scale blankslate images so they look nicer on high resolution displays - #1946", "[Fixed] Windows: Installer not completing or getting stuck in a loop - #1875 #1863", "[Fixed] Move the 'Forgot Password' link to fix the tab order of the sign in view - #2200" ], "0.6.3-beta7": [], "0.6.3-beta6": [], "0.6.3-beta5": [], "0.6.3-beta4": [], "0.6.3-beta3": [], "0.6.3-beta2": [], "0.6.3-beta1": [], "0.6.3-beta0": [], "0.6.2": [ "[New] Link to User Guides from the Help menu - #1963", "[New] Added the 'Open in External Editor' contextual menu item to changed files - #2023", "[New] Added the 'Show' and 'Open Command Prompt' contextual menu items to repositories - #1554", "[New] Windows: Support self-signed or untrusted certificates - #671", "[New] Copy the SHA to the clipboard when clicked - #1501", "[Improved] Provide the option of initializing a new repository when adding a directory that isn't already one - #969", "[Improved] Link to the working directory when there are no changes - #1871", "[Improved] Hitting Enter when selecting a base branch creates the new branch - #1780", "[Improved] Prefix repository names with their owner if they are ambiguous - #1848", "[Fixed] Sort and filter licenses like GitHub.com - #1987", "[Fixed] Long branch names not getting truncated in the Rename Branch dialog - #1891", "[Fixed] Prune old log files - #1540", "[Fixed] Ensure the local path is valid before trying to create a new repository - #1487", "[Fixed] Support cloning repository wikis - #1624", "[Fixed] Disable the Select All checkbox when there are no changes - #1389", "[Fixed] Changed docx files wouldn't show anything in the diff panel - #1990", "[Fixed] Disable the Merge button when there are no commits to merge - #1359", "[Fixed] Username/password authentication not working for GitHub Enterprise - #2064", "[Fixed] Better error messages when an API call fails - #2017", "[Fixed] Create the 'logs' directory if it doesn't exist - #1550", "[Fixed] Enable the 'Remove' menu item for missing repositories - #1776" ], "0.6.1": [ "[Fixed] Properly log stats opt in/out - #1949", "[Fixed] Source maps for exceptions in the main process - #1957", "[Fixed] Styling of the exception dialog - #1956", "[Fixed] Handle ambiguous references - #1947", "[Fixed] Handle non-ASCII text in diffs - #1970", "[Fixed] Uncaught exception when hitting the arrow keys after showing autocompletions - #1971", "[Fixed] Clear the organizations list when publishing a new repository and switching between tabs - #1969", "[Fixed] Push properly when a tracking branch has a different name from the local branch - #1967", "[Improved] Warn when line endings will change - #1906" ], "0.6.0": [ "[Fixed] Issue autocompletion not working for older issues - #1814", "[Fixed] GitHub repository association not working for repositories with some remote URL formats - #1826 #1679", "[Fixed] Don't try to delete a remote branch that no longer exists - #1829", "[Fixed] Tokens created by development builds would be used in production builds but wouldn't work - #1727", "[Fixed] Submodules can now be added - #708", "[Fixed] Properly handle the case where a file is added to the index but removed from the working tree - #1310", "[Fixed] Use a local image for the default avatar - #1621", "[Fixed] Make the file path in diffs selectable - #1768", "[Improved] More logging! - #1823", "[Improved] Better error message when trying to add something that's not a repository - #1747", "[Improved] Copy the shell environment into the app's environment - #1796", "[Improved] Updated to Git 2.13.0 - #1897", "[Improved] Add 'Reveal' to the contextual menu for changed files - #1566", "[Improved] Better handling of large diffs - #1818 #1524", "[Improved] App launch time - #1900" ], "0.5.9": [ "[New] Added Zoom In and Zoom Out - #1217", "[Fixed] Various errors when on an unborn branch - #1450", "[Fixed] Disable push/pull menu items when there is no remote - #1448", "[Fixed] Better error message when the GitHub Enterprise version is too old - #1628", "[Fixed] Error parsing non-JSON responses - #1505 #1522", "[Fixed] Updated the 'Install Git' help documentation link - #1797", "[Fixed] Disable menu items while in the Welcome flow - #1529", "[Fixed] Windows: Fall back to HOME if Document cannot be found - #1825", "[Improved] Close the window when an exception occurs - #1562", "[Improved] Always use merge when pulling - #1627", "[Improved] Move the 'New Branch' menu item into the Branch menu - #1757", "[Improved] Remove Repository's default button is now Cancel - #1751", "[Improved] Only fetch the default remote - #1435", "[Improved] Faster commits with many files - #1405", "[Improved] Measure startup time more reliably - #1798", "[Improved] Prefer the GitHub repository name instead of the name on disk - #664" ], "0.5.8": [ "[Fixed] Switching tabs in Preferences/Settings or Repository Settings would close the dialog - #1724", "[Improved] Standardized colors which improves contrast and readability - #1713" ], "0.5.7": [ "[Fixed] Windows: Handle protocol events which launch the app - #1582", "[Fixed] Opting out of stats reporting in the Welcome flow - #1698", "[Fixed] Commit description text being too light - #1695", "[Fixed] Exception on startup if the app was activated too quickly - #1564", "[Improved] Default directory for cloning now - #1663", "[Improved] Accessibility support - #1289", "[Improved] Lovely blank slate illustrations - #1708" ], "0.5.6": [ "[Fixed] macOS: The buttons in the Untrusted Server dialog not doing anything - #1622", "[Fixed] Better warning in Rename Branch when the branch will be created with a different name than was entered - #1480", "[Fixed] Provide a tooltip for commit summaries in the History list - #1483", "[Fixed] Prevent the Update Available banner from getting squished - #1632", "[Fixed] Title bar not responding to double-clicks - #1590 #1655", "[Improved] Discard All Changes is now accessible by right-clicking the file column header - #1635" ], "0.5.5": [ "[Fixed] Save the default path after creating a new repository - #1486", "[Fixed] Only let the user launch the browser once for the OAuth flow - #1427", "[Fixed] Don't linkify invalid URLs - #1456", "[Fixed] Excessive padding in the Merge Branch dialog - #1577", "[Fixed] Octicon pixel alignment issues - #1584", "[Fixed] Windows: Invoking some menu items would break the window's snapped state - #1603", "[Fixed] macOS: Errors authenticating while pushing - #1514", "[Fixed] Don't linkify links in the History list or in Undo - #1548 #1608 #1474", "[Fixed] Diffs not working when certain git config values were set - #1559" ], "0.5.4": [ "[Fixed] The release notes URL pointed to the wrong page - #1503", "[Fixed] Only create the `logs` directory if it doesn't already exist - #1510", "[Fixed] Uncaught exception creating a new repository if you aren't a member of any orgs - #1507", "[Fixed] Only report the first uncaught exception - #1517", "[Fixed] Include the name of the default branch in the New Branch dialog - #1449", "[Fixed] Uncaught exception if a network error occurred while loading user email addresses - #1522 #1508", "[Fixed] Uncaught exception while performing a contextual menu action - #1532", "[Improved] Move all error logging to the main process - #1473", "[Improved] Stats reporting reliability - #1561" ], "0.5.3": [ "[Fixed] Display of large image diffs - #1494", "[Fixed] Discard Changes spacing - #1495" ], "0.5.2": [ "[Fixed] Display errors that happen while publishing a repository - #1396", "[Fixed] Menu items not updating - #1462", "[Fixed] Always select the first changed file - #1306", "[Fixed] macOS: Use Title Case consistently - #1477 #1481", "[Fixed] Create Branch padding - #1479", "[Fixed] Bottom padding in commit descriptions - #1345", "[Improved] Dialog polish - #1451", "[Improved] Store logs in a logs directory - #1370", "[Improved] New Welcome illustrations - #1471", "[Improved] Request confirmation before removing a repository - #1233", "[Improved] Windows icon polish - #1457" ], "0.5.1": [ "[New] Windows: A nice little gif while installing the app - #1440", "[Fixed] Disable pinch zoom - #1431", "[Fixed] Don't show carriage return indicators in diffs - #1444", "[Fixed] History wouldn't update after switching branches - #1446", "[Improved] Include more information in exception reports - #1429", "[Improved] Updated Terms and Conditions - #1438", "[Improved] Sub-pixel anti-aliasing in some lists - #1452", "[Improved] Windows: A new application identifier, less likely to collide with other apps - #1441" ], "0.5.0": [ "[Added] Menu item for showing the app logs - #1349", "[Fixed] Don't let the two-factor authentication dialog be submitted while it's empty - #1386", "[Fixed] Undo Commit showing the wrong commit - #1373", "[Fixed] Windows: Update the icon used for the installer - #1410", "[Fixed] Undoing the first commit - #1401", "[Fixed] A second window would be opened during the OAuth dance - #1382", "[Fixed] Don't include the comment from the default merge commit message - #1367", "[Fixed] Show progress while committing - #923", "[Fixed] Windows: Merge Branch sizing would be wrong on high DPI monitors - #1210", "[Fixed] Windows: Resize the app from the top left corner - #1424", "[Fixed] Changing the destination path for cloning a repository now appends the repository's name - #1408", "[Fixed] The blank slate view could be visible briefly when the app launched - #1398", "[Improved] Performance updating menu items - #1321", "[Improved] Windows: Dim the title bar when the app loses focus - #1189" ], "0.0.39": ["[Fixed] An uncaught exception when adding a user - #1394"], "0.0.38": [ "[New] Shiny new icon! - #1221", "[New] More helpful blank slate view - #871", "[Fixed] Don't allow Undo while pushing/pulling/fetching - #1047", "[Fixed] Updating the default branch on GitHub wouldn't be reflected in the app - #1028 #1314", "[Fixed] Long repository names would overflow their container - #1331", "[Fixed] Removed development menu items in production builds - #1031 #1251 #1323 #1340", "[Fixed] Create Branch no longer changes as it's animating closed - #1304", "[Fixed] Windows: Cut / Copy / Paste menu items not working - #1379", "[Improved] Show a better error message when the user tries to authenticate with a personal access token - #1313", "[Improved] Link to the repository New Issue page from the Help menu - #1349", "[Improved] Clone in Desktop opens the Clone dialog - #918" ], "0.0.37": [ "[Fixed] Better display of the 'no newline at end of file' indicator - #1253", "[Fixed] macOS: Destructive dialogs now use the expected button order - #1315", "[Fixed] Display of submodule paths - #785", "[Fixed] Incomplete stats submission - #1337", "[Improved] Redesigned welcome flow - #1254", "[Improved] App launch time - #1225", "[Improved] Handle uncaught exceptions - #1106" ], "0.0.36": [ "[Fixed] Bugs around associating an email address with a GitHub user - #975", "[Fixed] Use the correct reference name for an unborn branch - #1283", "[Fixed] Better diffs for renamed files - #980", "[Fixed] Typo in Create Branch - #1303", "[Fixed] Don't allow whitespace-only branch names - #1288", "[Improved] Focus ring polish - #1287", "[Improved] Less intrusive update notifications - #1136", "[Improved] Faster launch time on Windows - #1309", "[Improved] Faster git information refreshing - #1305", "[Improved] More consistent use of sentence case on Windows - #1316", "[Improved] Autocomplete polish - #1241" ], "0.0.35": [ "[New] Show push/pull/fetch progress - #1238", "[Fixed] macOS: Add the Zoom menu item - #1260", "[Fixed] macOS: Don't show the titlebar while full screened - #1247", "[Fixed] Windows: Updates would make the app unresponsive - #1269", "[Fixed] Windows: Keyboard navigation in menus - #1293", "[Fixed] Windows: Repositories list item not working - #1293", "[Fixed] Auto updater errors not being propagated properly - #1266", "[Fixed] Only show the current branch tooltip on the branches button - #1275", "[Fixed] Double path truncation - #1270", "[Fixed] Sometimes toggling a file's checkbox would get undone - #1248", "[Fixed] Uncaught exception when internet connectivity was lost - #1048", "[Fixed] Cloned repositories wouldn't be associated with their GitHub repository - #1285", "[Improved] Better performance on large repositories - #1281", "[Improved] Commit summary is now expandable when the summary is long - #519", "[Improved] The SHA in historical commits is now selectable - #1154", "[Improved] The Create Branch dialog was polished and refined - #1137" ], "0.0.34": [ "[New] macOS: Users can choose whether to accept untrusted certificates - #671", "[New] Windows: Users are prompted to install git when opening a shell if it is not installed - #813", "[New] Checkout progress is shown if branch switching takes a while - #1208", "[New] Commit summary and description are automatically populated for merge conflicts - #1228", "[Fixed] Cloning repositories while not signed in - #1163", "[Fixed] Merge commits are now created as merge commits - #1216", "[Fixed] Display of diffs with /r newline - #1234", "[Fixed] Windows: Maximized windows are no longer positioned slightly off screen - #1202", "[Fixed] JSON parse errors - #1243", "[Fixed] GitHub Enterprise repositories were not associated with the proper Enterprise repository - #1242", "[Fixed] Timestamps in the Branches list would wrap - #1255", "[Fixed] Merges created from pulling wouldn't use the right git author - #1262", "[Improved] Check for update errors are suppressed if they happen in the background - #1104, #1195", "[Improved] The shortcut to show the repositories list is now command or control-T - #1220", "[Improved] Command or control-W now closes open dialogs - #949", "[Improved] Less memory usage while parsing large diffs - #1235" ], "0.0.33": ["[Fixed] Update Now wouldn't update now - #1209"], "0.0.32": [ "[New] You can now disable stats reporting from Preferences > Advanced - #1120", "[New] Acknowledgements are now available from About - #810", "[New] Open pull requests from dot com in the app - #808", "[Fixed] Don't show background fetch errors - #875", "[Fixed] No more surprise and delight - #620", "[Fixed] Can't discard renamed files - #1177", "[Fixed] Logging out of one account would log out of all accounts - #1192", "[Fixed] Renamed files truncation - #695", "[Fixed] Git on Windows now integrates with the system certificate store - #706", "[Fixed] Cloning with an account/repoository shortcut would always fail - #1150", "[Fixed] OS version reporting - #1130", "[Fixed] Publish a new repository would always fail - #1046", "[Fixed] Authentication would fail for the first repository after logging in - #1118", "[Fixed] Don't flood the user with errors if a repository disappears on disk - #1132", "[Improved] The Merge dialog uses the Branches list instead of a drop down menu - #749", "[Improved] Lots of design polish - #1188, #1183, #1170, #1184, #1181, #1179, #1142, #1125" ], "0.0.31": [ "[New] Prompt user to login when authentication error occurs - #903", "[New] Windows application has a new app menu, replaces previous hamburger menu - #991", "[New] Refreshed colours to align with GitHub website scheme - #1077", "[New] Custom about dialog on all platforms - #1102", "[Fixed] Improved error handling when probing for a GitHub Enterprise server - #1026", "[Fixed] User can cancel 2FA flow - #1057", "[Fixed] Tidy up current set of menu items - #1063", "[Fixed] Manually focus the window when a URL action has been received - #1072", "[Fixed] Disable middle-click event to prevent new windows being launched - #1074", "[Fixed] Pre-fill the account name in the Welcome wizard, not login - #1078", "[Fixed] Diffs wouldn't work if an external diff program was configured - #1123", "[Improved] Lots of design polish work - #1113, #1099, #1094, #1077" ], "0.0.30": [ "[Fixed] Crash when invoking menu item due to incorrect method signature - #1041" ], "0.0.29": [ "[New] Commit summary and description fields now display issues and mentions as links for GitHub repositories - #941", "[New] Show placeholder when the repository cannot be found on disk - #946", "[New] New Repository actions moved out of popover and into new menu - #1018", "[Fixed] Display a helpful error message when an unverified user signs into GitHub Desktop - #1010", "[Fixed] Fix kerning issue when access keys displayed - #1033", "[Fixed] Protected branches show a descriptive error when the push is rejected - #1036", "[Fixed] 'Open in shell' on Windows opens to repository location - #1037" ], "0.0.28": ["[Fixed] Bumping release notes to test deployments again"], "0.0.27": [ "[Fixed] 2FA dialog when authenticating has information for SMS authentication - #1009", "[Fixed] Autocomplete for users handles accounts containing `-` - #1008" ], "0.0.26": [ "[Fixed] Address deployment issue by properly documenting release notes" ], "0.0.25": [ "[Added] Autocomplete displays user matches - #942", "[Fixed] Handle Enter key in repository and branch list when no matches exist - #995", "[Fixed] 'Add Repository' button displays in dropdown when repository list empty - #984", "[Fixed] Correct icon displayed for non-GitHub repository - #964 #955", "[Fixed] Enter key when inside dialog submits form - #956", "[Fixed] Updated URL handler entry on macOS - #945", "[Fixed] Commit button is disabled while commit in progress - #940", "[Fixed] Handle index state change when gitginore change is discarded - #935", "[Fixed] 'Create New Branch' view squashes branch list when expanded - #927", "[Fixed] Application creates repository path if it doesn't exist on disk - #925", "[Improved] Preferences sign-in flow updated to standalone dialogs - #961" ], "0.0.24": ["Changed a thing", "Added another thing"] } }
iotivity /
This mirror is deprecated. Please visit https://github.com/iotivity/iotivity-lite for forking the IoTivity-Lite project. To contribute code to the project, please visit https://www.iotivity.org/get-involved, https://www.iotivity.org/
sanusanth /
What is JavaScript and what does it do? Before you start learning something new, it’s important to understand exactly what it is and what it does. This is especially useful when it comes to mastering a new programming language. In simple terms, JavaScript is a programming language used to make websites interactive. If you think about the basic makeup of a website, you have HTML, which describes and defines the basic content and structure of the website, then you have CSS, which tells the browser how this HTML content should be displayed—determining things like color and font. With just HTML and CSS, you have a website that looks good but doesn’t actually do much. JavaScript brings the website to life by adding functionality. JavaScript is responsible for elements that the user can interact with, such as drop-down menus, modal windows, and contact forms. It is also used to create things like animations, video players, and interactive maps. Nowadays, JavaScript is an all-purpose programming language—meaning it runs across the entire software stack. The most popular application of JavaScript is on the client side (aka frontend), but since Node.js came on the scene, many people run JavaScript on the server side (aka backend) as well. When used on the client side, JavaScript code is read, interpreted, and executed in the user’s web browser. When used on the server side, it is run on a remote computer. You can learn more about the difference between frontend and backend programming here. JavaScript isn’t only used to create websites. It can also be used to build browser-based games and, with the help of certain frameworks, mobile apps for different operating systems. The creation of new libraries and frameworks is also making it possible to build backend programs with JavaScript, such as web apps and server apps. Is it still worth learning JavaScript in 2021? The world of web development is constantly moving. With so many new tools popping up all the time, it can be extremely difficult to know where you should focus your efforts. As an aspiring developer, you’ll want to make sure that what you’re learning is still relevant in today’s industry. If you’re having doubts about JavaScript, it’s important to know that, since its creation in 1995, JavaScript is pretty much everywhere on the web—and that’s not likely to change any time soon. According to the 2020 StackOverflow developer survey, JavaScript is the most commonly used programming language for the eighth year in a row. It is currently used by 94.5% of all websites and, despite originally being designed as a client-side language, JavaScript has now made its way to the server-side of websites (thanks to Node.js), mobile devices (thanks to React Native and Ionic) and desktop (courtesy of Electron). As long as people are interacting with the web, you can assume that JavaScript is highly relevant—there’s no doubt that this is a language worth knowing! With that in mind, let’s look at some of the key benefits of becoming a JavaScript expert. Why learn JavaScript? The most obvious reason for learning JavaScript is if you have hopes of becoming a web developer. Even if you haven’t got your heart set on a tech career, being proficient in JavaScript will enable you to build websites from scratch—a pretty useful skill to have in today’s job market! If you do want to become a web developer, here are some of the main reasons why you should learn JavaScript: JavaScript experts are versatile JavaScript is an extremely versatile language. Once you’ve mastered it, the possibilities are endless: you can code on the client-side (frontend) using Angular and on the server-side (backend) using Node.js. You can also develop web, mobile, and desktop apps using React, React Native, and Electron, and you can even get involved in machine learning. If you want to become a frontend developer, JavaScript is a prerequisite. However, that’s not the only career path open to you as a JavaScript expert. Mastering this key programming language could see you go on to work in full-stack development, games development, information security software engineering, machine learning, and artificial intelligence—to name just a few! Ultimately, if you want any kind of development or engineering career, proficiency in JavaScript is a must. JavaScript experts are in-demand (and well-paid) JavaScript is the most popular programming language in the world, so it’s no wonder that JavaScript is one of the most sought-after skills in the web development industry today. According to the Devskiller IT Skills and Hiring Report 2020, 72% of companies are looking to hire JavaScript experts. Enter the search term “JavaScript” on job site Indeed and you’ll find over 40,000 jobs requiring this skill (in the US). Run the same search on LinkedIn and the results are in excess of 125,000. At the same time, the global demand for JavaScript seems to outweigh the expertise available on the market. According to this 2018 HackerRank report, 48% of employers worldwide need developers with JavaScript skills, while only 42% of student developers claim to be proficient in JavaScript. And, in their most recent report for 2020, HackerRank once again reports that JavaScript is the most popular language that hiring mangers look for in a web developer candidate. Not only are JavaScript experts in demand—they are also well-paid. In the United States, JavaScript developers earn an average yearly salary of $111,953 per year. We’ve covered this topic in more detail in our JavaScript salary guide, but as you can see, learning JavaScript can really boost your earning potential as a developer. JavaScript is beginner-friendly Compared to many other programming languages, JavaScript offers one of the more beginner-friendly entry points into the world of coding. The great thing about JavaScript is that it comes installed on every modern web browser—there’s no need to set up any kind of development environment, which means you can start coding with JavaScript right away! Another advantage of learning JavaScript as your first programming language is that you get instant feedback; with a minimal amount of JavaScript code, you’ll immediately see visible results. There’s also a huge JavaScript community on sites like Stack Overflow, so you’ll find plenty of support as you learn. Not only is JavaScript beginner-friendly; it will also set you up with some extremely valuable transferable skills. JavaScript supports object-oriented, functional, and imperative styles of programming—skills which can be transferred to any new language you might learn later on, such as Python, Java, or C++. JavaScript provides a crucial introduction to key principles and practices that you’ll take with you throughout your career as a developer. Should you learn plain JavaScript first or can you skip to frameworks and libraries? When deciding whether or not to learn JavaScript, what you’re really asking is whether or not you should learn “vanilla” JavaScript. Vanilla JavaScript just means plain JavaScript without any libraries or frameworks. Let’s explore what this means in more detail now. What is meant by vanilla JavaScript, libraries, and frameworks? If you research the term “vanilla JavaScript”, you might run into some confusion; however, all you need to know is that vanilla JavaScript is used to refer to native, standards-based, non-extended JavaScript. There is no difference between vanilla JavaScript and JavaScript—it’s just there to emphasize the usage of plain JavaScript without the use of libraries and frameworks. So what are libraries and frameworks? JavaScript libraries and frameworks both contain sets of prewritten, ready-to-use JavaScript code—but they’re not the same thing. You can think of a framework as your blueprint for building a website: it gives you a structure to work from, and contains ready-made components and tools that help you to build certain elements much quicker than if you were to code them from scratch. Some popular JavaScript frameworks include Angular, React, Vue, and Node.js. Frameworks also contain libraries. Libraries are smaller than frameworks, and tend to be used for more specific cases. A JavaScript library contains sets of JavaScript code which can be called upon to implement certain functions and features. Let’s imagine you want to code a particular element into your website. You could write, say, ten lines of JavaScript from scratch—or you could take the condensed, ready-made version from your chosen JavaScript library. Some examples of JavaScript libraries include jQuery, Lodash, and Underscore. The easiest way to understand how frameworks and libraries work together is to imagine you are building a house. The framework provides the foundation and the structure, while the library enables you to add in ready-made components (like furniture) rather than building your own from scratch. You can learn more about the relationship between languages and libraries in this post explaining the main differences between JavaScript and jQuery. For now, let’s go back to our original question: How important is it to learn vanilla JavaScript? Should you learn vanilla JavaScript first? When it comes to learning JavaScript, it can be tempting to skip ahead to those time-saving frameworks and libraries we just talked about—and many developers do. However, there are many compelling arguments for learning plain JavaScript first. While JavaScript frameworks may help you get the job done quicker, there’s only so far you can go if you don’t understand the core concepts behind these frameworks. Frontend developer Abhishek Nagekar describes how not learning vanilla JavaScript came back to bite him when he started learning the JavaScript frameworks Node and Express: “As I went to write more and more code in Node and Express, I began to get stuck at even the tiniest problems. Suddenly, I was surrounded with words like callbacks, closures, event loop and prototype. It felt like I got a reintroduction to JavaScript, but this time, it was not a toddler playing in its cradle, it was something of a mysterious monster, challenging me on every other step for not having taken it seriously.” The above Tweet references a long-running joke within the developer community, and although it dates way back to 2015, it’s still highly relevant today. If you want to become a developer who can innovate, not just execute, you need to understand the underlying principles of the web—not just the shortcuts. This means learning vanilla JavaScript before you move on to frameworks. In fact, understanding plain JavaScript will help you later on when it comes to deciding whether to use a framework for a certain project, and if so, which framework to use. Why Study JavaScript? JavaScript is one of the 3 languages all web developers must learn: 1. HTML to define the content of web pages 2. CSS to specify the layout of web pages 3. JavaScript to program the behavior of web pages Learning Speed In this tutorial, the learning speed is your choice. Everything is up to you. If you are struggling, take a break, or re-read the material. Always make sure you understand all the "Try-it-Yourself" examples. The only way to become a clever programmer is to: Practice. Practice. Practice. Code. Code. Code ! Commonly Asked Questions How do I get JavaScript? Where can I download JavaScript? Is JavaScript Free? You don't have to get or download JavaScript. JavaScript is already running in your browser on your computer, on your tablet, and on your smart-phone. JavaScript is free to use for everyone.
dennishnf /
This project involved the analysis of the ArXiv citation network.
It is important for insurance companies to estimate the risk involved while covering a future customer. Predicting the chances of insurance claim for a future customer allows the company to avoid adding potentially loss making customers. It also helps in determining appropriate monthly charges form the insured person or object. Through this project I try to build a prediction model for a car insurance company to predict the chances of loss making insurance deal based on the details of the car. A major challenge in this project is associated with the number of claims in the training data, only about 0.7% of the data has cars that have claimed insurance. Though this small claim percentage seem insignificant bu the cost requires to cover these insurance could cost the company millions of dollars. To address this challenge, I try to implement sampling techniques to increase the percentage of claim data. Language: R Repository contains: Test and Training data files, R code and a detailed project report conveying challenges in the data and approach to build a final prediction model.