SEIS 665 Assignment 2: Linux & Git Overview This week we will focus on becoming familiar with launching a Linux server and working with some basic Linux and Git commands. We will use AWS to launch and host the Linux server. AWS might seem a little confusing at this point. Don’t worry, we will gain much more hands-on experience with AWS throughout the course. The goal is to get you comfortable working with the technology and not overwhelm you with all the details. Requirements You need to have a personal AWS account and GitHub account for this assignment. You should also read the Git Hands-on Guide and Linux Hands-on Guide before beginning this exercise. A word about grading One of the key DevOps practices we learn about in this class is the use of automation to increase the speed and repeatability of processes. Automation is utilized during the assignment grading process to review and assess your work. It’s important that you follow the instructions in each assignment and type in required files and resources with the proper names. All names are case sensitive, so a name like "Web1" is not the same as "web1". If you misspell a name, use the wrong case, or put a file in the wrong directory location you will lose points on your assignment. This is the easiest way to lose points, and also the most preventable. You should always double-check your work to make sure it accurately reflects the requirements specified in the assignment. You should always carefully review the content of your files before submitting your assignment. The assignment Let’s get started! Create GitHub repository The first step in the assignment is to setup a Git repository on GitHub. We will use a special solution called GitHub Classroom for this course which automates the process of setting up student assignment repositories. Here are the basic steps: Click on the following link to open Assignment 2 on the GitHub Classroom site: https://classroom.github.com/a/K4zcVmX- (Links to an external site.)Links to an external site. Click on the Accept this assignment button. GitHub Classroom will provide you with a URL (https) to access the assignment repository. Either copy this address to your clipboard or write it down somewhere. You will need to use this address to set up the repository on a Linux server. Example: https://github.com/UST-SEIS665/hw2-seis665-02-spring2019-<your github id>.git At this point your new repository to ready to use. The repository is currently empty. We will put some content in there soon! Launch Linux server The second step in the assignment is to launch a Linux server using AWS EC2. The server should have the following characteristics: Amazon Linux 2 AMI 64-bit (usually the first option listed) Located in a U.S. region (us-east-1) t2.micro instance type All default instance settings (storage, vpm, security group, etc.) I’ve shown you how to launch EC2 instances in class. You can review it on Canvas. Once you launch the new server, it may take a few minutes to provision. Log into server The next step is to log into the Linux server using a terminal program with a secure shell (SSH) support. You can use iTerm2 (Links to an external site.)Links to an external site. on a Mac and GitBash/PuTTY (Links to an external site.)Links to an external site. on a PC. You will need to have the private server key and the public IP address before attempting to log into the server. The server key is basically your password. If you lose it, you will need to terminate the existing instance and launch a new server. I recommend reusing the same key when launching new servers throughout the class. Note, I make this recommendation to make the learning process easier and not because it is a common security practice. I’ve shown you how to use a terminal application to log into the instance using a Windows desktop. Your personal computer or lab computer may be running a different OS version, but the process is still very similar. You can review the videos on the Canvas. Working with Linux If you’ve made it this far, congratulations! You’ve made it over the toughest hurdle. By the end of this course, I promise you will be able to launch and log into servers in your sleep. You should be looking at a login screen that looks something like this: Last login: Mon Mar 21 21:17:54 2016 from 174-20-199-194.mpls.qwest.net __| __|_ ) _| ( / Amazon Linux AMI ___|\___|___| https://aws.amazon.com/amazon-linux-ami/2015.09-release-notes/ 8 package(s) needed for security, out of 17 available Run "sudo yum update" to apply all updates. ec2-user@ip-172-31-15-26 ~]$ Your terminal cursor is sitting at the shell prompt, waiting for you to type in your first command. Remember the shell? It is a really cool program that lets you start other programs and manage services on the Linux system. The rest of this assignment will be spent working with the shell. Note, when you are asked to type in a command in the steps below, don’t type in the dollar-sign ($) character. This is just meant to represent the command prompt. The actual commands are represented by the characters to the right of the command prompt. Let’s start by asking the shell for some help. Type in: $ help The shell provides you with a list of commands you can run along with possible command options. Next, check out one of the pages in the built-in manual: $ man ls A man page will appear with information on how to use the ls command. This command is used to list the contents of file directories. Either space through the contents of the man page or hit q to exit. Most of the core Linux commands have man pages available. But honestly, some of these man pages are a bit hard to understand. Sometimes your best bet is to search on Google if you are trying to figure out how to use a specific command. When you initially log into Linux, the system places you in your home directory. Each user on the system has a separate home directory. Let’s see where your home directory is located: $ pwd The response should be /home/ec2-user. The pwd command is handy to remember if you ever forget what file directory you are currently located in. If you recall from the Linux Hands-on Guide, this directory is also your current working directory. Type in: $ cd / The cd command let’s you change to a new working directory on the server. In this case, we changed to the root (/) directory. This is the parent of all the other directories on the file system. Type in: $ ls The ls command lists the contents of the current directory. As you can see, root directory contains many other directories. You will become familiar with these directories over time. The ls command provides a very basic directory listing. You need to supply the command with some options if you want to see more detailed information. Type in: $ ls -la See how this command provides you with much more detailed information about the files and directories? You can use this detailed listing to see the owner, group, and access control list settings for each file or directory. Do you see any files listed? Remember, the first character in the access control list column denotes whether a listed item is a file or a directory. You probably see a couple files with names like .autofsck. How come you didn’t see this file when you typed in the lscommand without any options? (Try to run this command again to convince yourself.) Files names that start with a period are called hidden files. These files won’t appear on normal directory listings. Type in: $ cd /var Then, type in: $ ls You will see a directory listing for the /var directory. Next, type in: $ ls .. Huh. This directory listing looks the same as the earlier root directory listing. When you use two periods (..) in a directory path that means you are referring to the parent directory of the current directory. Just think of the two dots as meaning the directory above the current directory. Now, type in: $ cd ~ $ pwd Whoa. We’re back at our home directory again. The tilde character (~) is another one of those handy little directory path shortcuts. It always refers to our personal home directory. Keep in mind that since every user has their own home directory, the tilde shortcut will refer to a unique directory for each logged-in user. Most students are used to navigating a file system by clicking a mouse in nested graphical folders. When they start using a command-line to navigate a file system, they sometimes get confused and lose track of their current position in the file system. Remember, you can always use the pwd command to quickly figure out what directory you are currently working in. Let’s make some changes to the file system. We can easily make our own directories on the file system. Type: mkdir test Now type: ls Cool, there’s our new test directory. Let’s pretend we don’t like that directory name and delete it. Type: rmdir test Now it’s gone. How can you be sure? You should know how to check to see if the directory still exists at this point. Go ahead and check. Let’s create another directory. Type in: $ mkdir documents Next, change to the new directory: $ cd documents Did you notice that your command prompt displays the name of the current directory? Something like: [ec2-user@ip-172-31-15-26 documents]$. Pretty handy, huh? Okay, let’s create our first file in the documents directory. This is just an empty file for training purposes. Type in: $ touch paper.txt Check to see that the new file is in the directory. Now, go back to the previous directory. Remember the double dot shortcut? $ cd .. Okay, we don’t like our documents directory any more. Let’s blow it away. Type in: $ rmdir documents Uh oh. The shell didn’t like that command because the directory isn’t empty. Let’s change back into the documents directory. But this time don’t type in the full name of the directory. You can let shell auto-completion do the typing for you. Type in the first couple characters of the directory name and then hit the tab key: $ cd doc<tab> You should use the tab auto-completion feature often. It saves typing and makes working with the Linux file system much much easier. Tab is your friend. Now, remove the file by typing: $ rm paper.txt Did you try to use the tab key instead of typing in the whole file name? Check to make sure the file was deleted from the directory. Next, create a new file: $ touch file1 We like file1 so much that we want to make a backup copy. Type: $ cp file1 file1-backup Check to make sure the new backup copy was created. We don’t really like the name of that new file, so let’s rename it. Type: $ mv file1-backup backup Moving a file to the same directory and giving it a new name is basically the same thing as renaming it. We could have moved it to a different directory if we wanted. Let’s list all of the files in the current directory that start with the letter f: $ ls f* Using wildcard pattern matching in file commands is really useful if you want the command to impact or filter a group of files. Now, go up one directory to the parent directory (remember the double dot shortcut?) We tried to remove the documents directory earlier when it had files in it. Obviously that won’t work again. However, we can use a more powerful command to destroy the directory and vanquish its contents. Behold, the all powerful remove command: $ rm -fr documents Did you remember to use auto-completion when typing in documents? This command and set of options forcibly removes the directory and its contents. It’s a dangerous command wielded by the mightiest Linux wizards. Okay, maybe that’s a bit of an exaggeration. Just be careful with it. Check to make sure the documents directory is gone before proceeding. Let’s continue. Change to the directory /var and make a directory called test. Ugh. Permission denied. We created this darn Linux server and we paid for it. Shouldn’t we be able to do anything we want on it? You logged into the system as a user called ec2-user. While this user can create and manage files in its home directory, it cannot change files all across the system. At least it can’t as a normal user. The ec2-user is a member of the root group, so it can escalate its privileges to super-user status when necessary. Let’s try it: $ sudo mkdir test Check to make sure the directory exists now. Using sudo we can execute commands as a super-user. We can do anything we want now that we know this powerful new command. Go ahead and delete the test directory. Did you remember to use sudo before the rmdir command? Check to make sure the directory is gone. You might be asking yourself the question: why can we list the contents of the /var directory but not make changes? That’s because all users have read access to the /var directory and the ls command is a read function. Only the root users or those acting as a super-user can write changes to the directory. Let’s go back to our home directory: $ cd ~ Editing text files is a really common task on Linux systems because many of the application configuration files are text files. We can create a text file by using a text editor. Type in: $ nano myfile.conf The shell starts up the nano text editor and places your terminal cursor in the editing screen. Nano is a simple text-based word processor. Type in a few lines of text. When you’re done writing your novel, hit ctrl-x and answer y to the prompt to save your work. Finally, hit enter to save the text to the filename you specified. Check to see that your file was saved in the directory. You can take a look at the contents of your file by typing: $ cat myfile.conf The cat command displays your text file content on the terminal screen. This command works fine for displaying small text files. But if your file is hundreds of lines long, the content will scroll down your terminal screen so fast that you won’t be able to easily read it. There’s a better way to view larger text files. Type in: $ less myfile.conf The less command will page the display of a text file, allowing you to page through the contents of the file using the space bar. Your text file is probably too short to see the paging in action though. Hit q to quit out of the less text viewer. Hit the up-arrow key on your keyboard a few times until the commmand nano myfile.conf appears next to your command prompt. Cool, huh? The up-arrow key allows you to replay a previously run command. Linux maintains a list of all the commands you have run since you logged into the server. This is called the command history. It’s a really useful feature if you have to re-run a complex command again. Now, hit ctrl-c. This cancels whatever command is displayed on the command line. Type in the following command to create a couple empty files in the directory: $ touch file1 file2 file3 Confirm that the files were created. Some commands, like touch. allow you to specify multiple files as arguments. You will find that Linux commands have all kinds of ways to make tasks more efficient like this. Throughout this assignment, we have been running commands and viewing results on the terminal screen. The screen is the standard place for commands to output results. It’s known as the standard out (stdout). However, it’s really useful to output results to the file system sometimes. Type in: $ ls > listing.txt Take a look at the directory listing now. You just created a new file. View the contents of the listing.txt file. What do you see? Instead of sending the output from the ls command to the screen we sent it to a text file. Let’s try another one. Type: $ cat myfile.conf > listing.txt Take a look at the contents of the listing.txt file again. It looks like your myfile.conf file now. It’s like you made a copy of it. But what happened to the previous content in the listing.txt file? When you redirect the output of a command using the right angle-bracket character (>), the output overwrites the existing file. Type this command in: $ cat myfile.conf >> listing.txt Now look at the contents of the listing.txt file. You should see your original content displayed twice. When you use two angle-bracket characters in the commmand the output appends (or adds to) the file instead of overwriting it. We redirected the output from a command to a text file. It’s also possible to redirect the input to a command. Typically we use a keyboard to provide input, but sometimes it makes more sense to input a file to a command. For example, how many words are in your new listing.txt file? Let’s find out. Type in: $ wc -w < listing.txt Did you get a number? This command inputs the listing.txt file into a word count program called wc. Type in the command: $ ls /usr/bin The terminal screen probably scrolled quickly as filenames flashed by. The /usr/bin directory holds quite a few files. It would be nice if we could page through the contents of this directory. Well, we can. We can use a special shell feature called pipes. In previous steps, we redirected I/O using the file system. Pipes allow us to redirect I/O between programs. We can redirect the output from one program into another. Type in: $ ls /usr/bin | less Now the directory listing is paged. Hit the spacebar to page through the listing. The pipe, represented by a vertical bar character (|), takes the output from the ls command and redirects it to the less command where the resulting output is paged. Pipes are super powerful and used all the time by savvy Linux operators. Hit the q key to quit the paginated directory listing command. Working with shell scripts Now things are going to get interesting. We’ve been manually typing in commands throughout this exercise. If we were running a set of repetitive tasks, we would want to automate the process as much as possible. The shell makes it really easy to automate tasks using shell scripts. The shell provides many of the same features as a basic procedural programming language. Let’s write some code. Type in this command: $ j=123 $ echo $j We just created a variable named j referencing the string 123. The echo command printed out the value of the variable. We had to use a dollar sign ($) when referencing the variable in another command. Next, type in: $ j=1+1 $ echo $j Is that what you expected? The shell just interprets the variable value as a string. It’s not going to do any sort of computation. Typing in shell script commands on the command line is sort of pointless. We want to be able to create scripts that we can run over-and-over. Let’s create our first shell script. Use the nano editor to create a file named myscript. When the file is open in the editor, type in the following lines of code: #!/bin/bash echo Hello $1 Now quit the editor and save your file. We can run our script by typing: $ ./myscript World Er, what happened? Permission denied. Didn’t we create this file? Why can’t we run it? We can’t run the script file because we haven’t set the execute permission on the file. Type in: $ chmod u+x myscript This modifies the file access control list to allow the owner of the file to execute it. Let’s try to run the command again. Hit the up-arrow key a couple times until the ./myscript World command is displayed and hit enter. Hooray! Our first shell script. It’s probably a bit underwhelming. No problem, we’ll make it a little more complex. The script took a single argument called World. Any arguments provided to a shell script are represented as consecutively numbered variables inside the script ($1, $2, etc). Pretty simple. You might be wondering why we had to type the ./ characters before the name of our script file. Try to type in the command without them: $ myscript World Command not found. That seems a little weird. Aren’t we currently in the directory where the shell script is located? Well, that’s just not how the shell works. When you enter a command into the shell, it looks for the command in a predefined set of directories on the server called your PATH. Since your script file isn’t in your special path, the shell reports it as not found. By typing in the ./ characters before the command name you are basically forcing the shell to look for your script in the current directory instead of the default path. Create another file called cleanup using nano. In the file editor window type: #!/bin/bash # My cleanup script mkdir archive mv file* archive Exit the editor window and save the file. Change the permissions on the script file so that you can execute it. Now run the command: $ ./cleanup Take a look at the file directory listing. Notice the archive directory? List the contents of that directory. The script automatically created a new directory and moved three files into it. Anything you can do manually at a command prompt can be automated using a shell script. Let’s create one more shell script. Use nano to create a script called namelist. Here is the content of the script: #!/bin/bash # for-loop test script names='Jason John Jane' for i in $names do echo Hello $i done Change the permissions on the script file so that you can execute it. Run the command: $ ./namelist The script will loop through a set of names stored in a variable displaying each one. Scripts support several programming constructs like for-loops, do-while loops, and if-then-else. These building blocks allow you to create fairly complex scripts for automating tasks. Installing packages and services We’re nearing the end of this assignment. But before we finish, let’s install some new software packages on our server. The first thing we should do is make sure all the current packages installed on our Linux server are up-to-date. Type in: $ sudo yum update -y This is one of those really powerful commands that requires sudo access. The system will review the currently installed packages and go out to the Internet and download appropriate updates. Next, let’s install an Apache web server on our system. Type in: $ sudo yum install httpd -y Bam! You probably never knew that installing a web server was so easy. We’re not going to actually use the web server in this exercise, but we will in future assignments. We installed the web server, but is it actually running? Let’s check. Type in: $ sudo service httpd status Nope. Let’s start it. Type: $ sudo service httpd start We can use the service command to control the services running on the system. Let’s setup the service so that it automatically starts when the system boots up. Type in: $ sudo chkconfig httpd on Cool. We installed the Apache web server on our system, but what other programs are currently running? We can use the pscommand to find out. Type in: $ ps -ax Lots of processes are running on our system. We can even look at the overall performance of our system using the topcommand. Let’s try that now. Type in: $ top The display might seem a little overwhelming at first. You should see lots of performance information displayed including the cpu usage, free memory, and a list of running tasks. We’re almost across the finish line. Let’s make sure all of our valuable work is stored in a git repository. First, we need to install git. Type in the command: $ sudo yum install git -y Check your work It’s very important to check your work before submitting it for grading. A misspelled, misplaced or missing file will cost you points. This may seem harsh, but the reality is that these sorts of mistakes have consequences in the real world. For example, a server instance could fail to launch properly and impact customers because a single required file is missing. Here is what the contents of your git repository should look like before final submission: ┣archive ┃ ┣ file1 ┃ ┣ file2 ┃ ┗ file3 ┣ namelist ┗ myfile.conf Saving our work in the git repository Next, make sure you are still in your home directory (/home/ec2-user). We will install the git repository you created at the beginning of this exercise. You will need to modify this command by typing in the GitHub repository URL you copied earlier. $ git clone <your GitHub URL here>.git Example: git clone https://github.com/UST-SEIS665/hw2-seis665-02-spring2019-<your github id>.git The git application will ask you for your GitHub username and password. Note, if you have multi-factor authentication enabled on your GitHub account you will need to provide a personal token instead of your password. Git will clone (copy) the repository from GitHub to your Linux server. Since the repository is empty the clone happens almost instantly. Check to make sure that a sub-directory called "hw2-seis665-02-spring2019-<username>" exists in the current directory (where <username> is your GitHub account name). Git automatically created this directory as part of the cloning process. Change to the hw2-seis665-02-spring2019-<username> directory and type: $ ls -la Notice the .git hidden directory? This is where git actually stores all of the file changes in your repository. Nothing is actually in your repository yet. Change back to the parent directory (cd ..). Next, let’s move some of our files into the repository. Type: $ mv archive hw2-seis665-02-spring2019-<username> $ mv namelist hw2-seis665-02-spring2019-<username> $ mv myfile.conf hw2-seis665-02-spring2019-<username> Hopefully, you remembered to use the auto-complete function to reduce some of that typing. Change to the hw2-seis665-02-spring2019-<username> directory and list the directory contents. Your files are in the working directory, but are not actually stored in the repository because they haven’t been committed yet. Type in: $ git status You should see a list of untracked files. Let’s tell git that we want these files tracked. Type in: $ git add * Now type in the git status command again. Notice how all the files are now being tracked and are ready to be committed. These files are in the git staging area. We’ll commit them to the repository next. Type: $ git commit -m 'assignment 2 files' Next, take a look at the commit log. Type: $ git log You should see your commit listed along with an assigned hash (long string of random-looking characters). Finally, let’s save the repository to our GitHub account. Type in: $ git push origin master The git client will ask you for your GitHub username and password before pushing the repository. Go back to the GitHub.com website and login if you have been logged out. Click on the repository link for the assignment. Do you see your files listed there? Congratulations, you completed the exercise! Terminate server The last step is to terminate your Linux instance. AWS will bill you for every hour the instance is running. The cost is nominal, but there’s no need to rack up unnecessary charges. Here are the steps to terminate your instance: Log into your AWS account and click on the EC2 dashboard. Click the Instances menu item. Select your server in the instances table. Click on the Actions drop down menu above the instances table. Select the Instance State menu option Click on the Terminate action. Your Linux instance will shutdown and disappear in a few minutes. The EC2 dashboard will continue to display the instance on your instance listing for another day or so. However, the state of the instance will be terminated. Submitting your assignment — IMPORTANT! If you haven’t already, please e-mail me your GitHub username in order to receive credit for this assignment. There is no need to email me to tell me that you have committed your work to GitHub or to ask me if your GitHub submission worked. If you can see your work in your GitHub repository, I can see your work.

# Git Credential Manager [](https://github.com/GitCredentialManager/git-credential-manager/actions/workflows/continuous-integration.yml) --- [Git Credential Manager](https://github.com/GitCredentialManager/git-credential-manager) (GCM) is a secure Git credential helper built on [.NET](https://dotnet.microsoft.com) that runs on Windows, macOS, and Linux. Compared to Git's [built-in credential helpers]((https://git-scm.com/book/en/v2/Git-Tools-Credential-Storage)) (Windows: wincred, macOS: osxkeychain, Linux: gnome-keyring/libsecret) which provides single-factor authentication support working on any HTTP-enabled Git repository, GCM provides multi-factor authentication support for [Azure DevOps](https://dev.azure.com/), Azure DevOps Server (formerly Team Foundation Server), GitHub, Bitbucket, and GitLab. Git Credential Manager (GCM) replaces the .NET Framework-based [Git Credential Manager for Windows](https://github.com/microsoft/Git-Credential-Manager-for-Windows) (GCM), and the Java-based [Git Credential Manager for Mac and Linux](https://github.com/microsoft/Git-Credential-Manager-for-Mac-and-Linux) (Java GCM), providing a consistent authentication experience across all platforms. ## Current status Git Credential Manager is currently available for Windows, macOS, and Linux\*. GCM only works with HTTP(S) remotes; you can still use Git with SSH: - [Azure DevOps SSH](https://docs.microsoft.com/en-us/azure/devops/repos/git/use-ssh-keys-to-authenticate?view=azure-devops) - [GitHub SSH](https://help.github.com/en/articles/connecting-to-github-with-ssh) - [Bitbucket SSH](https://confluence.atlassian.com/bitbucket/ssh-keys-935365775.html) Feature|Windows|macOS|Linux -|:-:|:-:|:-: Installer/uninstaller|&#10003;|&#10003;|&#10003;\* Secure platform credential storage|&#10003; [(see more)](docs/credstores.md)|&#10003; [(see more)](docs/credstores.md)|&#10003; [(see more)](docs/credstores.md) Multi-factor authentication support for Azure DevOps|&#10003;|&#10003;|&#10003; Two-factor authentication support for GitHub|&#10003;|&#10003;|&#10003; Two-factor authentication support for Bitbucket|&#10003;|&#10003;|&#10003; Two-factor authentication support for GitLab|&#10003;|&#10003;|&#10003; Windows Integrated Authentication (NTLM/Kerberos) support|&#10003;|_N/A_|_N/A_ Basic HTTP authentication support|&#10003;|&#10003;|&#10003; Proxy support|&#10003;|&#10003;|&#10003; `amd64` support|&#10003;|&#10003;|&#10003; `x86` support|&#10003;|_N/A_|&#10007; `arm64` support|best effort|via Rosetta 2|best effort, no packages `armhf` support|_N/A_|_N/A_|best effort, no packages (\*) GCM guarantees support for the below Linux distributions. GCM maintainers also monitor and evaluate issues opened against other distributions to determine community interest/engagement and whether an emerging platform should become fully-supported. - Debian/Ubuntu/Linux Mint - Fedora/CentOS/RHEL - Alpine ## Download and Install ### macOS Homebrew The preferred installation mechanism is using Homebrew; we offer a Cask in our custom Tap. To install, run the following: ```shell brew tap microsoft/git brew install --cask git-credential-manager-core ``` After installing you can stay up-to-date with new releases by running: ```shell brew upgrade git-credential-manager-core ``` #### Git Credential Manager for Mac and Linux (Java-based GCM) If you have an existing installation of the 'Java GCM' on macOS and you have installed this using Homebrew, this installation will be unlinked (`brew unlink git-credential-manager`) when GCM is installed. #### Uninstall To uninstall, run the following: ```shell brew uninstall --cask git-credential-manager-core ``` --- ### macOS Package We also provide a [.pkg installer](https://github.com/GitCredentialManager/git-credential-manager/releases/latest) with each release. To install, double-click the installation package and follow the instructions presented. #### Uninstall To uninstall, run the following: ```shell sudo /usr/local/share/gcm-core/uninstall.sh ``` --- <!-- this explicit anchor should stay stable so that external docs can link here --> <!-- markdownlint-disable-next-line no-inline-html --> <a name="linux-install-instructions"></a> ### Linux #### Experimental: install from source helper script If you would like to help dogfood our new install from source helper script, run the following: 1. To ensure `curl` is installed: ```shell curl --version ``` If `curl` is not installed, please use your distribution's package manager to install it. 1. To download and run the script: ```shell curl -LO https://raw.githubusercontent.com/GitCredentialManager/git-credential-manager/main/src/linux/Packaging.Linux/install-from-source.sh && sh ./install-from-source.sh && git-credential-manager-core configure ``` **Note:** You will be prompted to enter your credentials so that the script can download GCM's dependencies using your distribution's package manager. #### Ubuntu/Debian distributions Download the latest [.deb package](https://github.com/GitCredentialManager/git-credential-manager/releases/latest), and run the following: ```shell sudo dpkg -i <path-to-package> git-credential-manager-core configure ``` **Note:** Although packages were previously offered on certain [Microsoft Ubuntu package feeds](https://packages.microsoft.com/repos/), GCM no longer publishes to these repositories. Please install the Debian package using the above instructions instead. To uninstall: ```shell git-credential-manager-core unconfigure sudo dpkg -r gcmcore ``` #### Other distributions Download the latest [tarball](https://github.com/GitCredentialManager/git-credential-manager/releases/latest), and run the following: ```shell tar -xvf <path-to-tarball> -C /usr/local/bin git-credential-manager-core configure ``` To uninstall: ```shell git-credential-manager-core unconfigure rm $(command -v git-credential-manager-core) ``` **Note:** all Linux distributions [require additional configuration](https://aka.ms/gcm/credstores) to use GCM. --- ### Windows GCM is included with [Git for Windows](https://gitforwindows.org/), and the latest version is included in each new Git for Windows release. This is the preferred way to install GCM on Windows. During installation you will be asked to select a credential helper, with GCM being set as the default.  #### Standalone installation You can also download the [latest installer](https://github.com/GitCredentialManager/git-credential-manager/releases/latest) for Windows to install GCM standalone. **:warning: Important :warning:** Installing GCM as a standalone package on Windows will forcibly override the version of GCM that is bundled with Git for Windows, **even if the version bundled with Git for Windows is a later version**. There are two flavors of standalone installation on Windows: - User (preferred) (`gcmcoreuser-win*`): Does not require administrator rights. Will install only for the current user and updates only the current user's Git configuration. - System (`gcmcore-win*`): Requires administrator rights. Will install for all users on the system and update the system-wide Git configuration. To install, double-click the desired installation package and follow the instructions presented. #### Uninstall (Windows 10) To uninstall, open the Settings app and navigate to the Apps section. Select "Git Credential Manager" and click "Uninstall". #### Uninstall (Windows 7-8.1) To uninstall, open Control Panel and navigate to the Programs and Features screen. Select "Git Credential Manager" and click "Remove". #### Windows Subsystem for Linux (WSL) Git Credential Manager can be used with the [Windows Subsystem for Linux (WSL)](https://aka.ms/wsl) to enable secure authentication of your remote Git repositories from inside of WSL. [Please see the GCM on WSL docs](docs/wsl.md) for more information. ## Supported Git versions Git Credential Manager tries to be compatible with the broadest set of Git versions (within reason). However there are some know problematic releases of Git that are not compatible. - Git 1.x The initial major version of Git is not supported or tested with GCM. - Git 2.26.2 This version of Git introduced a breaking change with parsing credential configuration that GCM relies on. This issue was fixed in commit [`12294990`](https://github.com/git/git/commit/12294990c90e043862be9eb7eb22c3784b526340) of the Git project, and released in Git 2.27.0. ## How to use Once it's installed and configured, Git Credential Manager is called implicitly by Git. You don't have to do anything special, and GCM isn't intended to be called directly by the user. For example, when pushing (`git push`) to [Azure DevOps](https://dev.azure.com), [Bitbucket](https://bitbucket.org), or [GitHub](https://github.com), a window will automatically open and walk you through the sign-in process. (This process will look slightly different for each Git host, and even in some cases, whether you've connected to an on-premises or cloud-hosted Git host.) Later Git commands in the same repository will re-use existing credentials or tokens that GCM has stored for as long as they're valid. Read full command line usage [here](docs/usage.md). ### Configuring a proxy See detailed information [here](https://aka.ms/gcm/httpproxy). ## Additional Resources - [Frequently asked questions](docs/faq.md) - [Development and debugging](docs/development.md) - [Command-line usage](docs/usage.md) - [Configuration options](docs/configuration.md) - [Environment variables](docs/environment.md) - [Enterprise configuration](docs/enterprise-config.md) - [Network and HTTP configuration](docs/netconfig.md) - [Credential stores](docs/credstores.md) - [Architectural overview](docs/architecture.md) - [Host provider specification](docs/hostprovider.md) - [Azure Repos OAuth tokens](docs/azrepos-users-and-tokens.md) - [GitLab support](docs/gitlab.md) ## Experimental Features - [Windows broker (experimental)](docs/windows-broker.md) ## Contributing This project welcomes contributions and suggestions. See the [contributing guide](CONTRIBUTING.md) to get started. This project follows [GitHub's Open Source Code of Conduct](CODE_OF_CONDUCT.md). ## License We're [MIT](LICENSE) licensed. When using GitHub logos, please be sure to follow the [GitHub logo guidelines](https://github.com/logos).

# Cmder [](https://gitter.im/cmderdev/cmder?utm_source=badge&utm_medium=badge&utm_campaign=pr-badge&utm_content=badge) [](https://ci.appveyor.com/project/MartiUK/cmder) Cmder is a **software package** created out of pure frustration over absence of usable console emulator on Windows. It is based on [ConEmu](https://conemu.github.io/) with *major* config overhaul, comes with a Monokai color scheme, amazing [clink](https://chrisant996.github.io/clink/) (further enhanced by [clink-completions](https://github.com/vladimir-kotikov/clink-completions)) and a custom prompt layout.  ## Why use it The main advantage of Cmder is portability. It is designed to be totally self-contained with no external dependencies, which makes it great for **USB Sticks** or **cloud storage**. So you can carry your console, aliases and binaries (like wget, curl and git) with you anywhere. The Cmder's user interface is also designed to be more eye pleasing, and you can compare the main differences between Cmder and ConEmu [here](https://conemu.github.io/en/cmder.html). ## Installation ### Single User Portable Config 1. Download the [latest release](https://github.com/cmderdev/cmder/releases/) 2. Extract the archive. *Note: This path should not be `C:\Program Files` or anywhere else that would require Administrator access for modifying configuration files* 3. (optional) Place your own executable files into the `%cmder_root%\bin` folder to be injected into your PATH. 4. Run `Cmder.exe` ### Shared Cmder install with Non-Portable Individual User Config 1. Download the [latest release](https://github.com/cmderdev/cmder/releases/) 2. Extract the archive to a shared location. 3. (optional) Place your own executable files and custom app folders into the `%cmder_root%\bin`. See: [bin/README.md](./bin/Readme.md) - This folder to be injected into your PATH by default. - See `/max_depth [1-5]` in 'Command Line Arguments for `init.bat`' table to add subdirectories recursively. 4. (optional) Place your own custom app folders into the `%cmder_root%\opt`. See: [opt/README.md](./opt/Readme.md) - This folder will NOT be injected into your PATH so you have total control of what gets added. 5. Run `Cmder.exe` with `/C` command line argument. Example: `cmder.exe /C %userprofile%\cmder_config` * This will create the following directory structure if it is missing. ``` c:\users\[CH JaDi Rajput]\cmder_config ├───bin ├───config │ └───profile.d └───opt ``` - (optional) Place your own executable files and custom app folders into `%userprofile%\cmder_config\bin`. - This folder to be injected into your PATH by default. - See `/max_depth [1-5]` in 'Command Line Arguments for `init.bat`' table to add subdirectories recursively. - (optional) Place your own custom app folders into the `%user_profile%\cmder_config\opt`. - This folder will NOT be injected into your PATH so you have total control of what gets added. * Both the shared install and the individual user config locations can contain a full set of init and profile.d scripts enabling shared config with user overrides. See below. ## Cmder.exe Command Line Arguments | Argument | Description | | ------------------- | ----------------------------------------------------------------------- | | `/C [user_root_path]` | Individual user Cmder root folder. Example: `%userprofile%\cmder_config` | | `/M` | Use `conemu-%computername%.xml` for ConEmu settings storage instead of `user_conemu.xml` | | `/REGISTER [ALL, USER]` | Register a Windows Shell Menu shortcut. | | `/UNREGISTER [ALL, USER]` | Un-register a Windows Shell Menu shortcut. | | `/SINGLE` | Start Cmder in single mode. | | `/START [start_path]` | Folder path to start in. | | `/TASK [task_name]` | Task to start after launch. | | `/X [ConEmu extras pars]` | Forwards parameters to ConEmu | ## Context Menu Integration So you've experimented with Cmder a little and want to give it a shot in a more permanent home; ### Shortcut to open Cmder in a chosen folder 1. Open a terminal as an Administrator 2. Navigate to the directory you have placed Cmder 3. Execute `.\cmder.exe /REGISTER ALL` _If you get a message "Access Denied" ensure you are executing the command in an **Administrator** prompt._ In a file explorer window right click in or on a directory to see "Cmder Here" in the context menu. ## Keyboard shortcuts ### Tab manipulation * <kbd>Ctrl</kbd> + <kbd>T</kbd> : New tab dialog (maybe you want to open cmd as admin?) * <kbd>Ctrl</kbd> + <kbd>W</kbd> : Close tab * <kbd>Ctrl</kbd> + <kbd>D</kbd> : Close tab (if pressed on empty command) * <kbd>Shift</kbd> + <kbd>Alt</kbd> + <kbd>#Number</kbd> : Fast new tab: <kbd>1</kbd> - CMD, <kbd>2</kbd> - PowerShell * <kbd>Ctrl</kbd> + <kbd>Tab</kbd> : Switch to next tab * <kbd>Ctrl</kbd> + <kbd>Shift</kbd> + <kbd>Tab</kbd> : Switch to previous tab * <kbd>Ctrl</kbd> + <kbd>#Number</kbd> : Switch to tab #Number * <kbd>Alt</kbd> + <kbd>Enter</kbd>: Fullscreen ### Shell * <kbd>Ctrl</kbd> + <kbd>Alt</kbd> + <kbd>U</kbd> : Traverse up in directory structure (lovely feature!) * <kbd>End</kbd>, <kbd>Home</kbd>, <kbd>Ctrl</kbd> : Traversing text with as usual on Windows * <kbd>Ctrl</kbd> + <kbd>R</kbd> : History search * <kbd>Shift</kbd> + Mouse : Select and copy text from buffer _(Some shortcuts are not yet documented, though they exist - please document them here)_ ## Features ### Access to multiple shells in one window using tabs You can open multiple tabs each containing one of the following shells: | Task | Shell | Description | | ---- | ----- | ----------- | | Cmder | `cmd.exe` | Windows `cmd.exe` shell enhanced with Git, Git aware prompt, Clink (GNU Readline), and Aliases. | | Cmder as Admin | `cmd.exe` | Administrative Windows `cmd.exe` Cmder shell. | | PowerShell | `powershell.exe` | Windows PowerShell enhanced with Git and Git aware prompt . | | PowerShell as Admin | `powershell.exe` | Administrative Windows `powershell.exe` Cmder shell. | | Bash | `bash.exe` | Unix/Linux like bash shell running on Windows. | | Bash as Admin | `bash.exe` | Administrative Unix/Linux like bash shell running on Windows. | | Mintty | `bash.exe` | Unix/Linux like bash shell running on Windows. See below for Mintty configuration differences | | Mintty as Admin | `bash.exe` | Administrative Unix/Linux like bash shell running on Windows. See below for Mintty configuration differences | Cmder, PowerShell, and Bash tabs all run on top of the Windows Console API and work as you might expect in Cmder with access to use ConEmu's color schemes, key bindings and other settings defined in the ConEmu Settings dialog. ⚠ *NOTE:* Only the full edition of Cmder comes with a pre-installed bash, using a vendored [git-for-windows](https://gitforwindows.org/) installation. The pre-configured Bash tabs may not work on Cmder mini edition without additional configuration. You may however, choose to use an external installation of bash, such as Microsoft's [Subsystem for Linux](https://docs.microsoft.com/en-us/windows/wsl/install-win10) (called WSL) or the [Cygwin](https://cygwin.com/) project which provides POSIX support on windows. ⚠ *NOTE:* Mintty tabs use a program called 'mintty' as the terminal emulator that is not based on the Windows Console API, rather it's rendered graphically by ConEmu. Mintty differs from the other tabs in that it supports xterm/xterm-256color TERM types, and does not work with ConEmu settings like color schemes and key bindings. As such, some differences in functionality are to be expected, such as Cmder not being able to apply a system-wide configuration to it. As a result mintty specific config is done via the `[%USERPROFILE%|$HOME]/.minttyrc` file. You may read more about Mintty and its config file [here](https://github.com/mintty/mintty). An example of setting Cmder portable terminal colors for mintty: From a bash/mintty shell: ``` cd $CMDER_ROOT/vendor git clone https://github.com/karlin/mintty-colors-solarized.git cd mintty-colors-solarized/ echo source \$CMDER_ROOT/vendor/mintty-colors-solarized/mintty-solarized-dark.sh>>$CMDER_ROOT/config/user_profile.sh ``` You may find some Monokai color schemes for mintty to match Cmder [here](https://github.com/oumu/mintty-color-schemes/blob/master/base16-monokai-mod.minttyrc). ### Changing Cmder Default `cmd.exe` Prompt Config File The default Cmder shell `cmd::Cmder` prompt is customized using `Clink` and is configured by editing a config file that exists in one of two locations: - Single User Portable Config `%CMDER_ROOT%\config\cmder_prompt_config.lua` - Shared Cmder install with Non-Portable Individual User Config `%CMDER_USER_CONFIG%\cmder_prompt_config.lua` If your Cmder setup does not have this file create it from `%CMDER_ROOT%\vendor\cmder_prompt_config.lua.default` Customizations include: - Colors. - Single/Multi-line. - Full path/Folder only. - `[user]@[host]` to the beginning of the prompt. - `~` for home directory. - `λ` symbol Documentation is in the file for each setting. ### Changing Cmder Default `cmd.exe` Shell Startup Behaviour Using Task Arguments 1. Press <kbd>Win</kbd> + <kbd>Alt</kbd> + <kbd>T</kbd> 1. Click either: * `1. {cmd::Cmder as Admin}` * `2. {cmd::Cmder}` 1. Add command line arguments where specified below: *Note: Pay attention to the quotes!* ``` cmd /s /k ""%ConEmuDir%\..\init.bat" [ADD ARGS HERE]" ``` ##### Command Line Arguments for `init.bat` | Argument | Description | Default | | ----------------------------- | ---------------------------------------------------------------------------------------------- | ------------------------------------- | | `/c [user cmder root]` | Enables user bin and config folders for 'Cmder as admin' sessions due to non-shared environment. | not set | | `/d` | Enables debug output. | not set | | `/f` | Enables Cmder Fast Init Mode. This disables some features, see pull request [#1492](https://github.com/cmderdev/cmder/pull/1942) for more details. | not set | | `/t` | Enables Cmder Timed Init Mode. This displays the time taken run init scripts | not set | | `/git_install_root [file path]` | User specified Git installation root path. | `%CMDER_ROOT%\vendor\Git-for-Windows` | | `/home [home folder]` | User specified folder path to set `%HOME%` environment variable. | `%userprofile%` | | `/max_depth [1-5]` | Define max recurse depth when adding to the path for `%cmder_root%\bin` and `%cmder_user_bin%` | 1 | | `/nix_tools [0-2]` | Define how `*nix` tools are added to the path. Prefer Windows Tools: 1, Prefer *nix Tools: 2, No `/usr/bin` in `%PATH%`: 0 | 1 | | `/svn_ssh [path to ssh.exe]` | Define `%SVN_SSH%` so we can use git svn with ssh svn repositories. | `%GIT_INSTALL_ROOT%\bin\ssh.exe` | | `/user_aliases [file path]` | File path pointing to user aliases. | `%CMDER_ROOT%\config\user_aliases.cmd` | | `/v` | Enables verbose output. | not set | | (custom arguments) | User defined arguments processed by `cexec`. Type `cexec /?` for more usage. | not set | ### Cmder Shell User Config Single user portable configuration is possible using the cmder specific shell config files. Edit the below files to add your own configuration: | Shell | Cmder Portable User Config | | ------------- | ----------------------------------------- | | Cmder | `%CMDER_ROOT%\config\user_profile.cmd` | | PowerShell | `$ENV:CMDER_ROOT\config\user_profile.ps1` | | Bash/Mintty | `$CMDER_ROOT/config/user_profile.sh` | Note: Bash and Mintty sessions will also source the `$HOME/.bashrc` file if it exists after it sources `$CMDER_ROOT/config/user_profile.sh`. You can write `*.cmd|*.bat`, `*.ps1`, and `*.sh` scripts and just drop them in the `%CMDER_ROOT%\config\profile.d` folder to add startup config to Cmder. | Shell | Cmder `Profile.d` Scripts | | ------------- | -------------------------------------------------- | | Cmder | `%CMDER_ROOT%\config\profile.d\*.bat and *.cmd` | | PowerShell | `$ENV:CMDER_ROOT\config\profile.d\*.ps1` | | Bash/Mintty | `$CMDER_ROOT/config/profile.d/*.sh` | #### Git Status Opt-Out To disable Cmder prompt git status globally add the following to `~/.gitconfig` or locally for a single repo `[repo]/.git/config` and start a new session. *Note: This configuration is not portable* ``` [cmder] status = false # Opt out of Git status for 'ALL' Cmder supported shells. cmdstatus = false # Opt out of Git status for 'Cmd.exe' shells. psstatus = false # Opt out of Git status for 'Powershell.exe and 'Pwsh.exe' shells. shstatus = false # Opt out of Git status for 'bash.exe' shells. ``` ### Aliases #### Cmder(`Cmd.exe`) Aliases You can define simple aliases for `cmd.exe` sessions with a command like `alias name=command`. Cmd.exe aliases support optional parameters through the `$1-9` or the `$*` special characters so the alias `vi=vim.exe $*` typed as `vi [filename]` will open `[filename]` in `vim.exe`. Cmd.exe aliases can also be more complex. See: [DOSKEY.EXE documentation](https://docs.microsoft.com/en-us/windows-server/administration/windows-commands/doskey) for additional details on complex aliases/macros for `cmd.exe` Aliases defined using the `alias.bat` command will automatically be saved in the `%CMDER_ROOT%\config\user_aliases.cmd` file To make an alias and/or any other profile settings permanent add it to one of the following: Note: These are loaded in this order by `$CMDER_ROOT/vendor/init.bat`. Anything stored in `%CMDER_ROOT%` will be a portable setting and will follow cmder to another machine. * `%CMDER_ROOT%\config\profile.d\*.cmd` and `\*.bat` * `%CMDER_ROOT%\config\user_aliases.cmd` * `%CMDER_ROOT%\config\user_profile.cmd` #### Bash.exe|Mintty.exe Aliases Bash shells support simple and complex aliases with optional parameters natively so they work a little different. Typing `alias name=command` will create an alias only for the current running session. To make an alias and/or any other profile settings permanent add it to one of the following: Note: These are loaded in this order by `$CMDER_ROOT/vendor/git-for-windows/etc/profile.d/cmder.sh`. Anything stored in `$CMDER_ROOT` will be a portable setting and will follow cmder to another machine. * `$CMDER_ROOT/config/profile.d/*.sh` * `$CMDER_ROOT/config/user_profile.sh` * `$HOME/.bashrc` If you add bash aliases to `$CMDER_ROOT/config/user_profile.sh` they will be portable and follow your Cmder folder if you copy it to another machine. `$HOME/.bashrc` defined aliases are not portable. #### PowerShell.exe Aliases PowerShell has native simple alias support, for example `[new-alias | set-alias] alias command`, so complex aliases with optional parameters are not supported in PowerShell sessions. Type `get-help [new-alias|set-alias] -full` for help on PowerShell aliases. To make an alias and/or any other profile settings permanent add it to one of the following: Note: These are loaded in this order by `$ENV:CMDER_ROOT\vendor\user_profile.ps1`. Anything stored in `$ENV:CMDER_ROOT` will be a portable setting and will follow cmder to another machine. * `$ENV:CMDER_ROOT\config\profile.d\*.ps1` * `$ENV:CMDER_ROOT\config\user_profile.ps1` ### SSH Agent To start the vendored SSH agent simply call `start-ssh-agent`, which is in the `vendor/git-for-windows/cmd` folder. If you want to run SSH agent on startup, include the line `@call "%GIT_INSTALL_ROOT%/cmd/start-ssh-agent.cmd"` in `%CMDER_ROOT%/config/user_profile.cmd` (usually just uncomment it). ### Vendored Git Cmder is by default shipped with a vendored Git installation. On each instance of launching Cmder, an attempt is made to locate any other user provided Git binaries. Upon finding a `git.exe` binary, Cmder further compares its version against the vendored one _by executing_ it. The vendored `git.exe` binary is _only_ used when it is more recent than the user-installed one. You may use your favorite version of Git by including its path in the `%PATH%` environment variable. Moreover, the **Mini** edition of Cmder (found on the [downloads page](https://github.com/cmderdev/cmder/releases)) excludes any vendored Git binaries. ### Using external Cygwin/Babun, MSys2, WSL, or Git for Windows SDK with Cmder. You may run bash (the default shell used on Linux, macOS and GNU/Hurd) externally on Cmder, using the following instructions: 1. Setup a new task by pressing <kbd>Win</kbd> +<kbd>Alt</kbd> + <kbd>T</kbd>. 1. Click the `+` button to add a task. 1. Name the new task in the top text box. 1. Provide task parameters, this is optional. 1. Add `cmd /c "[path_to_external_env]\bin\bash --login -i" -new_console` to the `Commands` text box. **Recommended Optional Steps:** Copy the `vendor/cmder_exinit` file to the Cygwin/Babun, MSys2, or Git for Windows SDK environments `/etc/profile.d/` folder to use portable settings in the `$CMDER_ROOT/config` folder. Note: MinGW could work if the init scripts include `profile.d` but this has not been tested. The destination file extension depends on the shell you use in that environment. For example: * bash - Copy to `/etc/profile.d/cmder_exinit.sh` * zsh - Copy to `/etc/profile.d/cmder_exinit.zsh` Uncomment and edit the below line in the script to use Cmder config even when launched from outside Cmder. ``` # CMDER_ROOT=${USERPROFILE}/cmder # This is not required if launched from Cmder. ``` ### Customizing user sessions using `init.bat` custom arguments. You can pass custom arguments to `init.bat` and use `cexec.cmd` in your `user_profile.cmd` to evaluate these arguments then execute commands based on a particular flag being detected or not. `init.bat` creates two shortcuts for using `cexec.cmd` in your profile scripts. #### `%ccall%` - Evaluates flags, runs commands if found, and returns to the calling script and continues. ``` ccall=call C:\Users\user\cmderdev\vendor\bin\cexec.cmd ``` Example: `%ccall% /startnotepad start notepad.exe` #### `%cexec%` - Evaluates flags, runs commands if found, and does not return to the calling script. ``` cexec=C:\Users\user\cmderdev\vendor\bin\cexec.cmd ``` Example: `%cexec% /startnotepad start notepad.exe` It is useful when you have multiple tasks to execute `cmder` and need it to initialize the session differently depending on the task chosen. To conditionally start `notepad.exe` when you start a specific `cmder` task: * Press <kbd>win</kbd>+<kbd>alt</kbd>+<kbd>t</kbd> * Click `+` to add a new task. * Add the below to the `Commands` block: ```batch cmd.exe /k ""%ConEmuDir%\..\init.bat" /startnotepad" ``` * Add the below to your `%cmder_root%\config\user_profile.cmd` ```batch %ccall% "/startNotepad" "start" "notepad.exe"` ``` To see detailed usage of `cexec`, type `cexec /?` in cmder. ### Integrating Cmder with [Hyper](https://github.com/zeit/hyper), [Microsoft VS Code](https://code.visualstudio.com/), and your favorite IDEs Cmder by default comes with a vendored ConEmu installation as the underlying terminal emulator, as stated [here](https://conemu.github.io/en/cmder.html). However, Cmder can in fact run in a variety of other terminal emulators, and even integrated IDEs. Assuming you have the latest version of Cmder, follow the following instructions to get Cmder working with your own terminal emulator. For instructions on how to integrate Cmder with your IDE, please read our [Wiki section](https://github.com/cmderdev/cmder/wiki#cmder-integration). ## Upgrading The process of upgrading Cmder depends on the version/build you are currently running. If you have a `[cmder_root]/config/user[-|_]conemu.xml`, you are running a newer version of Cmder, follow the below process: 1. Exit all Cmder sessions and relaunch `[cmder_root]/cmder.exe`, this backs up your existing `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user[-|_]conemu.xml`. * The `[cmder_root]/config/user[-|_]conemu.xml` contains any custom settings you have made using the 'Setup Tasks' settings dialog. 2. Exit all Cmder sessions and backup any files you have manually edited under `[cmder_root]/vendor`. * Editing files under `[cmder_root]/vendor` is not recommended since you will need to re-apply these changes after any upgrade. All user customizations should go in `[cmder_root]/config` folder. 3. Delete the `[cmder_root]/vendor` folder. 4. Extract the new `cmder.zip` or `cmder_mini.zip` into `[cmder_root]/` overwriting all files when prompted. If you do not have a `[cmder_root]/config/user[-|_]conemu.xml`, you are running an older version of cmder, follow the below process: 1. Exit all Cmder sessions and backup `[cmder_root]/vendor/conemu-maximus5/conemu.xml` to `[cmder_root]/config/user[-|_]conemu.xml`. 2. Backup any files you have manually edited under `[cmder_root]/vendor`. * Editing files under `[cmder_root]/vendor` is not recommended since you will need to re-apply these changes after any upgrade. All user customizations should go in `[cmder_root]/config` folder. 3. Delete the `[cmder_root]/vendor` folder. 4. Extract the new `cmder.zip` or `cmder_mini.zip` into `[cmder_root]/` overwriting all files when prompted. ## Current development builds You can download builds of the current development branch by going to AppVeyor via the following link: [](https://ci.appveyor.com/project/MartiUK/cmder/branch/master/artifacts) ## License All software included is bundled with own license The MIT License (MIT) Copyright (c) 2016 Samuel Vasko Permission is hereby granted, free of charge, to any person obtaining a copy of this software and associated documentation files (the "Software"), to deal in the Software without restriction, including without limitation the rights to use, copy, modify, merge, publish, distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the Software is furnished to do so, subject to the following conditions: The above copyright notice and this permission notice shall be included in all copies or substantial portions of the Software. THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE.

<!DOCTYPE html> <html lang="en"> <head> <title>Bitbucket</title> <meta id="bb-bootstrap" data-current-user="{"isKbdShortcutsEnabled": true, "isSshEnabled": false, "isAuthenticated": false}" /> <meta name="frontbucket-version" content="production"> <meta http-equiv="X-UA-Compatible" content="IE=edge"> <meta charset="utf-8"> <meta name="viewport" content="width=device-width, initial-scale=1"> <script nonce="xxI7cPsOVRt9B81s" type="text/javascript">(window.NREUM||(NREUM={})).loader_config={licenseKey:"a2cef8c3d3",applicationID:"548124220"};window.NREUM||(NREUM={}),__nr_require=function(e,t,n){function r(n){if(!t[n]){var i=t[n]={exports:{}};e[n][0].call(i.exports,function(t){var i=e[n][1][t];return r(i||t)},i,i.exports)}return t[n].exports}if("function"==typeof __nr_require)return __nr_require;for(var i=0;i<n.length;i++)r(n[i]);return r}({1:[function(e,t,n){function r(){}function i(e,t,n){return function(){return o(e,[u.now()].concat(c(arguments)),t?null:this,n),t?void 0:this}}var o=e("handle"),a=e(7),c=e(8),f=e("ee").get("tracer"),u=e("loader"),s=NREUM;"undefined"==typeof window.newrelic&&(newrelic=s);var d=["setPageViewName","setCustomAttribute","setErrorHandler","finished","addToTrace","inlineHit","addRelease"],p="api-",l=p+"ixn-";a(d,function(e,t){s[t]=i(p+t,!0,"api")}),s.addPageAction=i(p+"addPageAction",!0),s.setCurrentRouteName=i(p+"routeName",!0),t.exports=newrelic,s.interaction=function(){return(new r).get()};var m=r.prototype={createTracer:function(e,t){var n={},r=this,i="function"==typeof t;return o(l+"tracer",[u.now(),e,n],r),function(){if(f.emit((i?"":"no-")+"fn-start",[u.now(),r,i],n),i)try{return t.apply(this,arguments)}catch(e){throw f.emit("fn-err",[arguments,this,e],n),e}finally{f.emit("fn-end",[u.now()],n)}}}};a("actionText,setName,setAttribute,save,ignore,onEnd,getContext,end,get".split(","),function(e,t){m[t]=i(l+t)}),newrelic.noticeError=function(e,t){"string"==typeof e&&(e=new Error(e)),o("err",[e,u.now(),!1,t])}},{}],2:[function(e,t,n){function r(){return c.exists&&performance.now?Math.round(performance.now()):(o=Math.max((new Date).getTime(),o))-a}function i(){return o}var o=(new Date).getTime(),a=o,c=e(9);t.exports=r,t.exports.offset=a,t.exports.getLastTimestamp=i},{}],3:[function(e,t,n){function r(e){return!(!e||!e.protocol||"file:"===e.protocol)}t.exports=r},{}],4:[function(e,t,n){function r(e,t){var n=e.getEntries();n.forEach(function(e){"first-paint"===e.name?d("timing",["fp",Math.floor(e.startTime)]):"first-contentful-paint"===e.name&&d("timing",["fcp",Math.floor(e.startTime)])})}function i(e,t){var n=e.getEntries();n.length>0&&d("lcp",[n[n.length-1]])}function o(e){e.getEntries().forEach(function(e){e.hadRecentInput||d("cls",[e])})}function a(e){if(e instanceof m&&!g){var t=Math.round(e.timeStamp),n={type:e.type};t<=p.now()?n.fid=p.now()-t:t>p.offset&&t<=Date.now()?(t-=p.offset,n.fid=p.now()-t):t=p.now(),g=!0,d("timing",["fi",t,n])}}function c(e){d("pageHide",[p.now(),e])}if(!("init"in NREUM&&"page_view_timing"in NREUM.init&&"enabled"in NREUM.init.page_view_timing&&NREUM.init.page_view_timing.enabled===!1)){var f,u,s,d=e("handle"),p=e("loader"),l=e(6),m=NREUM.o.EV;if("PerformanceObserver"in window&&"function"==typeof window.PerformanceObserver){f=new PerformanceObserver(r);try{f.observe({entryTypes:["paint"]})}catch(v){}u=new PerformanceObserver(i);try{u.observe({entryTypes:["largest-contentful-paint"]})}catch(v){}s=new PerformanceObserver(o);try{s.observe({type:"layout-shift",buffered:!0})}catch(v){}}if("addEventListener"in document){var g=!1,w=["click","keydown","mousedown","pointerdown","touchstart"];w.forEach(function(e){document.addEventListener(e,a,!1)})}l(c)}},{}],5:[function(e,t,n){function r(e,t){if(!i)return!1;if(e!==i)return!1;if(!t)return!0;if(!o)return!1;for(var n=o.split("."),r=t.split("."),a=0;a<r.length;a++)if(r[a]!==n[a])return!1;return!0}var i=null,o=null,a=/Version\/(\S+)\s+Safari/;if(navigator.userAgent){var c=navigator.userAgent,f=c.match(a);f&&c.indexOf("Chrome")===-1&&c.indexOf("Chromium")===-1&&(i="Safari",o=f[1])}t.exports={agent:i,version:o,match:r}},{}],6:[function(e,t,n){function r(e){function t(){e(a&&document[a]?document[a]:document[i]?"hidden":"visible")}"addEventListener"in document&&o&&document.addEventListener(o,t,!1)}t.exports=r;var i,o,a;"undefined"!=typeof document.hidden?(i="hidden",o="visibilitychange",a="visibilityState"):"undefined"!=typeof document.msHidden?(i="msHidden",o="msvisibilitychange"):"undefined"!=typeof document.webkitHidden&&(i="webkitHidden",o="webkitvisibilitychange",a="webkitVisibilityState")},{}],7:[function(e,t,n){function r(e,t){var n=[],r="",o=0;for(r in e)i.call(e,r)&&(n[o]=t(r,e[r]),o+=1);return n}var i=Object.prototype.hasOwnProperty;t.exports=r},{}],8:[function(e,t,n){function r(e,t,n){t||(t=0),"undefined"==typeof n&&(n=e?e.length:0);for(var r=-1,i=n-t||0,o=Array(i<0?0:i);++r<i;)o[r]=e[t+r];return o}t.exports=r},{}],9:[function(e,t,n){t.exports={exists:"undefined"!=typeof window.performance&&window.performance.timing&&"undefined"!=typeof window.performance.timing.navigationStart}},{}],ee:[function(e,t,n){function r(){}function i(e){function t(e){return e&&e instanceof r?e:e?u(e,f,a):a()}function n(n,r,i,o,a){if(a!==!1&&(a=!0),!l.aborted||o){e&&a&&e(n,r,i);for(var c=t(i),f=v(n),u=f.length,s=0;s<u;s++)f[s].apply(c,r);var p=d[h[n]];return p&&p.push([b,n,r,c]),c}}function o(e,t){y[e]=v(e).concat(t)}function m(e,t){var n=y[e];if(n)for(var r=0;r<n.length;r++)n[r]===t&&n.splice(r,1)}function v(e){return y[e]||[]}function g(e){return p[e]=p[e]||i(n)}function w(e,t){s(e,function(e,n){t=t||"feature",h[n]=t,t in d||(d[t]=[])})}var y={},h={},b={on:o,addEventListener:o,removeEventListener:m,emit:n,get:g,listeners:v,context:t,buffer:w,abort:c,aborted:!1};return b}function o(e){return u(e,f,a)}function a(){return new r}function c(){(d.api||d.feature)&&(l.aborted=!0,d=l.backlog={})}var f="nr@context",u=e("gos"),s=e(7),d={},p={},l=t.exports=i();t.exports.getOrSetContext=o,l.backlog=d},{}],gos:[function(e,t,n){function r(e,t,n){if(i.call(e,t))return e[t];var r=n();if(Object.defineProperty&&Object.keys)try{return Object.defineProperty(e,t,{value:r,writable:!0,enumerable:!1}),r}catch(o){}return e[t]=r,r}var i=Object.prototype.hasOwnProperty;t.exports=r},{}],handle:[function(e,t,n){function r(e,t,n,r){i.buffer([e],r),i.emit(e,t,n)}var i=e("ee").get("handle");t.exports=r,r.ee=i},{}],id:[function(e,t,n){function r(e){var t=typeof e;return!e||"object"!==t&&"function"!==t?-1:e===window?0:a(e,o,function(){return i++})}var i=1,o="nr@id",a=e("gos");t.exports=r},{}],loader:[function(e,t,n){function r(){if(!E++){var e=x.info=NREUM.info,t=l.getElementsByTagName("script")[0];if(setTimeout(u.abort,3e4),!(e&&e.licenseKey&&e.applicationID&&t))return u.abort();f(h,function(t,n){e[t]||(e[t]=n)});var n=a();c("mark",["onload",n+x.offset],null,"api"),c("timing",["load",n]);var r=l.createElement("script");r.src="https://"+e.agent,t.parentNode.insertBefore(r,t)}}function i(){"complete"===l.readyState&&o()}function o(){c("mark",["domContent",a()+x.offset],null,"api")}var a=e(2),c=e("handle"),f=e(7),u=e("ee"),s=e(5),d=e(3),p=window,l=p.document,m="addEventListener",v="attachEvent",g=p.XMLHttpRequest,w=g&&g.prototype;if(d(p.location)){NREUM.o={ST:setTimeout,SI:p.setImmediate,CT:clearTimeout,XHR:g,REQ:p.Request,EV:p.Event,PR:p.Promise,MO:p.MutationObserver};var y=""+location,h={beacon:"bam.nr-data.net",errorBeacon:"bam.nr-data.net",agent:"js-agent.newrelic.com/nr-1208.min.js"},b=g&&w&&w[m]&&!/CriOS/.test(navigator.userAgent),x=t.exports={offset:a.getLastTimestamp(),now:a,origin:y,features:{},xhrWrappable:b,userAgent:s};e(1),e(4),l[m]?(l[m]("DOMContentLoaded",o,!1),p[m]("load",r,!1)):(l[v]("onreadystatechange",i),p[v]("onload",r)),c("mark",["firstbyte",a.getLastTimestamp()],null,"api");var E=0}},{}],"wrap-function":[function(e,t,n){function r(e,t){function n(t,n,r,f,u){function nrWrapper(){var o,a,s,p;try{a=this,o=d(arguments),s="function"==typeof r?r(o,a):r||{}}catch(l){i([l,"",[o,a,f],s],e)}c(n+"start",[o,a,f],s,u);try{return p=t.apply(a,o)}catch(m){throw c(n+"err",[o,a,m],s,u),m}finally{c(n+"end",[o,a,p],s,u)}}return a(t)?t:(n||(n=""),nrWrapper[p]=t,o(t,nrWrapper,e),nrWrapper)}function r(e,t,r,i,o){r||(r="");var c,f,u,s="-"===r.charAt(0);for(u=0;u<t.length;u++)f=t[u],c=e[f],a(c)||(e[f]=n(c,s?f+r:r,i,f,o))}function c(n,r,o,a){if(!m||t){var c=m;m=!0;try{e.emit(n,r,o,t,a)}catch(f){i([f,n,r,o],e)}m=c}}return e||(e=s),n.inPlace=r,n.flag=p,n}function i(e,t){t||(t=s);try{t.emit("internal-error",e)}catch(n){}}function o(e,t,n){if(Object.defineProperty&&Object.keys)try{var r=Object.keys(e);return r.forEach(function(n){Object.defineProperty(t,n,{get:function(){return e[n]},set:function(t){return e[n]=t,t}})}),t}catch(o){i([o],n)}for(var a in e)l.call(e,a)&&(t[a]=e[a]);return t}function a(e){return!(e&&e instanceof Function&&e.apply&&!e[p])}function c(e,t){var n=t(e);return n[p]=e,o(e,n,s),n}function f(e,t,n){var r=e[t];e[t]=c(r,n)}function u(){for(var e=arguments.length,t=new Array(e),n=0;n<e;++n)t[n]=arguments[n];return t}var s=e("ee"),d=e(8),p="nr@original",l=Object.prototype.hasOwnProperty,m=!1;t.exports=r,t.exports.wrapFunction=c,t.exports.wrapInPlace=f,t.exports.argsToArray=u},{}]},{},["loader"]);</script> <meta name="bb-env" content="production" /> <meta id="bb-canon-url" name="bb-canon-url" content="https://bitbucket.org"> <meta name="bb-api-canon-url" content="https://api.bitbucket.org"> <meta name="bitbucket-commit-hash" content="10b0d91b991b"> <meta name="bb-app-node" content="app-3001"> <meta name="bb-dce-env" content="ASH2"> <meta name="bb-view-name" content="bitbucket.apps.repo2.views.SourceView"> <meta name="ignore-whitespace" content="False"> <meta name="tab-size" content="None"> <meta name="locale" content="en"> <meta name="application-name" content="Bitbucket"> <meta name="apple-mobile-web-app-title" content="Bitbucket"> <meta name="slack-app-id" content="A8W8QLZD1"> <meta name="statuspage-api-host" content="https://bqlf8qjztdtr.statuspage.io"> <meta name="theme-color" content="#0049B0"> <meta name="msapplication-TileColor" content="#0052CC"> <meta name="msapplication-TileImage" content="https://d301sr5gafysq2.cloudfront.net/10b0d91b991b/img/logos/bitbucket/mstile-150x150.png"> <link rel="apple-touch-icon" sizes="180x180" type="image/png" href="https://d301sr5gafysq2.cloudfront.net/10b0d91b991b/img/logos/bitbucket/apple-touch-icon.png"> <link rel="icon" sizes="192x192" type="image/png" href="https://d301sr5gafysq2.cloudfront.net/10b0d91b991b/img/logos/bitbucket/android-chrome-192x192.png"> <link rel="icon" sizes="16x16 24x24 32x32 64x64" type="image/x-icon" href="/favicon.ico?v=2"> <link rel="mask-icon" href="https://d301sr5gafysq2.cloudfront.net/10b0d91b991b/img/logos/bitbucket/safari-pinned-tab.svg" color="#0052CC"> <link rel="search" type="application/opensearchdescription+xml" href="/opensearch.xml" title="Bitbucket"> <meta name="description" content=""> <meta name="bb-single-page-app" content="true"> <link rel="stylesheet" href="https://d301sr5gafysq2.cloudfront.net/frontbucket/assets/present/vendor.f4e8952a.css"> <script nonce="xxI7cPsOVRt9B81s"> if (window.performance) { window.performance.okayToSendMetrics = !document.hidden && 'onvisibilitychange' in document; if (window.performance.okayToSendMetrics) { window.addEventListener('visibilitychange', function () { if (document.hidden) { window.performance.okayToSendMetrics = false; } }); } } </script> </head> <body> <div id="root"> <script nonce="xxI7cPsOVRt9B81s"> window.__webpack_public_path__ = "https://d301sr5gafysq2.cloudfront.net/frontbucket/assets/present/"; </script> </div> <script nonce="xxI7cPsOVRt9B81s"> window.__sentry__ = {"dsn": "https://2dcda83904474d8c86928ebbfa1ab294@sentry.io/1480772", "environment": "production", "tags": {"puppet_env": "production", "dc_location": "ash2", "service": "gu-bb", "revision": "10b0d91b991b"}}; window.__initial_state__ = {"section": {"repository": {"connectActions": [], "cloneProtocol": "https", "currentRepository": {"scm": "git", "website": "https://github.com/jdkoftinoff/mb-linux-msli", "uuid": "{7fe183eb-5a1e-43c1-af4a-d085585c9537}", "links": {"clone": [{"href": "https://bitbucket.org/__wp__/mb-linux-msli.git", "name": "https"}, {"href": "git@bitbucket.org:__wp__/mb-linux-msli.git", "name": "ssh"}], "self": {"href": "https://bitbucket.org/!api/2.0/repositories/__wp__/mb-linux-msli"}, "html": {"href": "https://bitbucket.org/__wp__/mb-linux-msli"}, "avatar": {"href": "https://bytebucket.org/ravatar/%7B7fe183eb-5a1e-43c1-af4a-d085585c9537%7D?ts=c"}}, "name": "mb-linux-msli", "project": {"description": "Project created by Bitbucket for __WP__", "links": {"self": {"href": "https://bitbucket.org/!api/2.0/workspaces/__wp__/projects/PROJ"}, "html": {"href": "https://bitbucket.org/__wp__/workspace/projects/PROJ"}, "avatar": {"href": "https://bitbucket.org/account/user/__wp__/projects/PROJ/avatar/32?ts=1447453979"}}, "name": "Untitled project", "created_on": "2015-11-13T22:32:59.539281+00:00", "key": "PROJ", "updated_on": "2015-11-13T22:32:59.539335+00:00", "owner": {"username": "__wp__", "type": "team", "display_name": "__WP__", "uuid": "{55ded115-598c-4864-b0e7-cdef05771294}", "links": {"self": {"href": "https://bitbucket.org/!api/2.0/teams/%7B55ded115-598c-4864-b0e7-cdef05771294%7D"}, "html": {"href": "https://bitbucket.org/%7B55ded115-598c-4864-b0e7-cdef05771294%7D/"}, "avatar": {"href": "https://bitbucket.org/account/__wp__/avatar/"}}}, "workspace": {"name": "__WP__", "type": "workspace", "uuid": "{55ded115-598c-4864-b0e7-cdef05771294}", "links": {"self": {"href": "https://bitbucket.org/!api/2.0/workspaces/__wp__"}, "html": {"href": "https://bitbucket.org/__wp__/"}, "avatar": {"href": "https://bitbucket.org/workspaces/__wp__/avatar/?ts=1543468984"}}, "slug": "__wp__"}, "type": "project", "is_private": false, "uuid": "{e060f8c0-a44d-4706-9d5b-b11f3b7f8ea7}"}, "language": "c", "mainbranch": {"name": "master"}, "full_name": "__wp__/mb-linux-msli", "owner": {"username": "__wp__", "display_name": "__WP__", "uuid": "{55ded115-598c-4864-b0e7-cdef05771294}", "links": {"self": {"href": "https://bitbucket.org/!api/2.0/teams/%7B55ded115-598c-4864-b0e7-cdef05771294%7D"}, "html": {"href": "https://bitbucket.org/%7B55ded115-598c-4864-b0e7-cdef05771294%7D/"}, "avatar": {"href": "https://bitbucket.org/account/__wp__/avatar/"}}, "is_active": true, "created_on": "2012-09-12T18:04:32.423010+00:00", "type": "team", "properties": {}, "has_2fa_enabled": null}, "updated_on": "2012-09-23T15:01:03.144649+00:00", "type": "repository", "slug": "mb-linux-msli", "is_private": false, "description": "Forked from https://github.com/jdkoftinoff/mb-linux-msli."}, "mirrors": [], "menuItems": [{"analytics_label": "repository.source", "is_client_link": true, "icon_class": "icon-source", "target": "_self", "weight": 200, "url": "/__wp__/mb-linux-msli/src", "tab_name": "source", "can_display": true, "label": "Source", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": ["/diff", "/history-node"], "id": "repo-source-link", "type": "menu_item", "children": [], "icon": "icon-source"}, {"analytics_label": "repository.commits", "is_client_link": true, "icon_class": "icon-commits", "target": "_self", "weight": 300, "url": "/__wp__/mb-linux-msli/commits/", "tab_name": "commits", "can_display": true, "label": "Commits", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": [], "id": "repo-commits-link", "type": "menu_item", "children": [], "icon": "icon-commits"}, {"analytics_label": "repository.branches", "is_client_link": true, "icon_class": "icon-branches", "target": "_self", "weight": 400, "url": "/__wp__/mb-linux-msli/branches/", "tab_name": "branches", "can_display": true, "label": "Branches", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": [], "id": "repo-branches-link", "type": "menu_item", "children": [], "icon": "icon-branches"}, {"analytics_label": "repository.pullrequests", "is_client_link": true, "icon_class": "icon-pull-requests", "target": "_self", "weight": 500, "url": "/__wp__/mb-linux-msli/pull-requests/", "tab_name": "pullrequests", "can_display": true, "label": "Pull requests", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": [], "id": "repo-pullrequests-link", "type": "menu_item", "children": [], "icon": "icon-pull-requests"}, {"analytics_label": "repository.jira", "is_client_link": true, "icon_class": "icon-jira", "target": "_self", "weight": 600, "url": "/__wp__/mb-linux-msli/jira", "tab_name": "jira", "can_display": true, "label": "Jira issues", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": [], "id": "repo-jira-link", "type": "menu_item", "children": [], "icon": "icon-jira"}, {"analytics_label": "repository.downloads", "is_client_link": false, "icon_class": "icon-downloads", "target": "_self", "weight": 800, "url": "/__wp__/mb-linux-msli/downloads/", "tab_name": "downloads", "can_display": true, "label": "Downloads", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": [], "id": "repo-downloads-link", "type": "menu_item", "children": [], "icon": "icon-downloads"}], "bitbucketActions": [{"analytics_label": "repository.clone", "is_client_link": false, "icon_class": "icon-clone", "target": "_self", "weight": 100, "url": "#clone", "tab_name": "clone", "can_display": true, "label": "<strong>Clone<\/strong> this repository", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": [], "id": "repo-clone-button", "type": "menu_item", "children": [], "icon": "icon-clone"}, {"analytics_label": "repository.compare", "is_client_link": false, "icon_class": "aui-icon-small aui-iconfont-devtools-compare", "target": "_self", "weight": 400, "url": "/__wp__/mb-linux-msli/branches/compare", "tab_name": "compare", "can_display": true, "label": "<strong>Compare<\/strong> branches or tags", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": [], "id": "repo-compare-link", "type": "menu_item", "children": [], "icon": "aui-icon-small aui-iconfont-devtools-compare"}, {"analytics_label": "repository.fork", "is_client_link": false, "icon_class": "icon-fork", "target": "_self", "weight": 500, "url": "/__wp__/mb-linux-msli/fork", "tab_name": "fork", "can_display": true, "label": "<strong>Fork<\/strong> this repository", "is_premium": null, "is_dropdown_item": false, "anchor": true, "badge_label": null, "analytics_payload": {}, "matching_url_prefixes": [], "id": "repo-fork-link", "type": "menu_item", "children": [], "icon": "icon-fork"}], "activeMenuItem": "source"}}, "global": {"needs_marketing_consent": false, "features": {"fd-send-webhooks-to-webhook-processor": true, "exp-share-to-invite-variation": false, "allocate-with-regions": true, "frontbucket-eager-dispatching-of-exited-code-review": true, "orochi-git-diff-refactor": true, "use-elasticache-lsn-storage": true, "workspaces-api-proxy": true, "webhook_encryption_disabled": true, "uninstall-dvcs-addon-only-when-jira-is-removed": true, "log-asap-errors": true, "connect-iframe-no-sub": true, "support-sending-custom-events-to-the-webhook-processor": true, "sync-aid-revoked-to-workspace": true, "new-analytics-cdn": true, "nav-add-file": false, "custom-default-branch-name-repo-create": true, "allow-users-members-endpoint": true, "remove-deactivated-users-from-followers": true, "whitelisted_throttle_exemption": true, "api-diff-caching": true, "hot-91446-add-tracing-x-b3": true, "reset-changes-requested-status": true, "provision-workspaces-in-hams": true, "provisioning-skip-workspace-creation": true, "record-site-addon-version": true, "restrict-commit-author-data": true, "enable-jwt-repo-filtering": true, "reviewer-status": true, "fd-add-gitignore-dropdown-on-create-repo-page": true, "repo-show-uuid": false, "workspace-member-set-last-accessed": true, "provisioning-install-pipelines-addon": true, "expand-accesscontrol-cache-key": true, "disable-hg": true, "new-code-review": true, "orochi-disable-hooks-with-lockid": true, "fd-prs-client-cache-fallback": true, "fd-ie-deprecation-phase-one": true, "clone-in-xcode": true, "enable-merge-bases-api": true, "bbc.core.disable-repository-statuses-fetch": false, "bms-repository-no-finalize": true, "use-moneybucket": true, "spa-repo-settings--repo-details": true, "use-py-hams-client-asap": true, "sync-workspace-user-active": true, "fetch-all-relevant-jira-projects": true, "connect-iframe-sandbox": true, "nav-next-settings": true, "auth-flow-adg3": true, "consenthub-config-endpoint-update": true, "new-code-review-onboarding-experience": true, "disable-repository-replication-task": true, "lookup-pr-approvers-from-prs": true, "orochi-add-custom-backend": true, "null-mainbranch-implies-none": true, "bbc.core.pride-logo": false, "pr_post_build_merge": true, "fd-ie-deprecation-phase-two": true, "workspace-ui": true, "provisioning-auto-login": true, "bbcdev-13546-caching-defaults": true, "hide-price-annual": true, "fd-jira-compatible-issue-export": true, "account-switcher": true, "user-mentions-repo-filtering": true, "spa-repo-settings--access-keys": true, "read-only-message-migrations": true, "free-daily-repo-limit": true, "svg-based-qr-code": true, "allow-cloud-session": true, "orochi-custom-default-branch-name-repo-create": true, "fd-overview-page-pr-filter-buttons": true, "show-upgrade-plans-banner": true}, "locale": "en", "geoip_country": null, "targetFeatures": {"fd-send-webhooks-to-webhook-processor": true, "orochi-large-merge-message-support": true, "allocate-with-regions": true, "frontbucket-eager-dispatching-of-exited-code-review": true, "orochi-git-diff-refactor": true, "fd-repository-page-loading-error-guard": true, "workspaces-api-proxy": true, "webhook_encryption_disabled": true, "uninstall-dvcs-addon-only-when-jira-is-removed": true, "whitelisted_throttle_exemption": true, "connect-iframe-no-sub": true, "support-sending-custom-events-to-the-webhook-processor": true, "sync-aid-revoked-to-workspace": true, "new-analytics-cdn": true, "log-asap-errors": true, "custom-default-branch-name-repo-create": true, "allow-users-members-endpoint": true, "remove-deactivated-users-from-followers": true, "expand-accesscontrol-cache-key": true, "api-diff-caching": true, "prlinks-installer": true, "rm-empty-ref-dirs-on-push": true, "reset-changes-requested-status": true, "provision-workspaces-in-hams": true, "provisioning-skip-workspace-creation": true, "record-site-addon-version": true, "restrict-commit-author-data": true, "enable-jwt-repo-filtering": true, "show-banner-about-new-review-experience": true, "enable-merge-bases-api": true, "account-switcher": true, "reviewer-status": true, "fd-add-gitignore-dropdown-on-create-repo-page": true, "use-elasticache-lsn-storage": true, "workspace-member-set-last-accessed": true, "provisioning-install-pipelines-addon": true, "consenthub-config-endpoint-update": true, "disable-hg": true, "new-code-review": true, "orochi-disable-hooks-with-lockid": true, "show-pr-update-activity-changes": true, "fd-ie-deprecation-phase-one": true, "clone-in-xcode": true, "fd-undo-last-push": false, "bms-repository-no-finalize": true, "exp-new-user-survey": true, "use-moneybucket": true, "spa-repo-settings--repo-details": true, "use-py-hams-client-asap": true, "atlassian-editor": true, "sync-workspace-user-active": true, "fetch-all-relevant-jira-projects": true, "hot-91446-add-tracing-x-b3": true, "connect-iframe-sandbox": true, "nav-next-settings": true, "auth-flow-adg3": true, "view-source-filtering-upon-timeout": true, "new-code-review-onboarding-experience": true, "disable-repository-replication-task": true, "lookup-pr-approvers-from-prs": true, "orochi-add-custom-backend": true, "null-mainbranch-implies-none": true, "fd-prs-client-cache-fallback": true, "pr_post_build_merge": true, "fd-ie-deprecation-phase-two": true, "workspace-ui": true, "provisioning-auto-login": true, "bbcdev-13546-caching-defaults": true, "hide-price-annual": true, "fd-jira-compatible-issue-export": true, "enable-fx3-client": true, "spa-repo-settings--access-keys": true, "read-only-message-migrations": true, "free-daily-repo-limit": true, "svg-based-qr-code": true, "allow-cloud-session": true, "orochi-custom-default-branch-name-repo-create": true, "markdown-embedded-html": false, "fd-overview-page-pr-filter-buttons": true, "show-upgrade-plans-banner": true}, "isFocusedTask": false, "browser_monitoring": true, "targetUser": {"username": "__wp__", "display_name": "__WP__", "uuid": "{55ded115-598c-4864-b0e7-cdef05771294}", "links": {"self": {"href": "https://bitbucket.org/!api/2.0/teams/%7B55ded115-598c-4864-b0e7-cdef05771294%7D"}, "html": {"href": "https://bitbucket.org/%7B55ded115-598c-4864-b0e7-cdef05771294%7D/"}, "avatar": {"href": "https://bitbucket.org/account/__wp__/avatar/"}}, "is_active": true, "created_on": "2012-09-12T18:04:32.423010+00:00", "type": "team", "properties": {}, "has_2fa_enabled": null}, "is_mobile_user_agent": false, "flags": [], "site_message": "", "isNavigationOpen": true, "path": "/__wp__/mb-linux-msli/src/master/", "focusedTaskBackButtonUrl": null, "whats_new_feed": "https://bitbucket.org/blog/wp-json/wp/v2/posts?categories=196&context=embed&per_page=6&orderby=date&order=desc"}, "repository": {"source": {"section": {"hash": "ae5d81ca8c8265958d9847aecca0505dbce92217", "atRef": null, "ref": {"name": "master", "links": {"self": {"href": "https://bitbucket.org/!api/2.0/repositories/__wp__/mb-linux-msli/refs/branches/master"}, "html": {"href": "https://bitbucket.org/__wp__/mb-linux-msli/branch/master"}}, "target": {"type": "commit", "hash": "ae5d81ca8c8265958d9847aecca0505dbce92217", "links": {"self": {"href": "https://bitbucket.org/!api/2.0/repositories/__wp__/mb-linux-msli/commit/ae5d81ca8c8265958d9847aecca0505dbce92217"}, "html": {"href": "https://bitbucket.org/__wp__/mb-linux-msli/commits/ae5d81ca8c8265958d9847aecca0505dbce92217"}}}}}}}}; window.__settings__ = {"MARKETPLACE_TERMS_OF_USE_URL": null, "JIRA_ISSUE_COLLECTORS": {"code-review-beta": {"url": "https://bitbucketfeedback.atlassian.net/s/d41d8cd98f00b204e9800998ecf8427e-T/-4bqv2z/b/20/a44af77267a987a660377e5c46e0fb64/_/download/batch/com.atlassian.jira.collector.plugin.jira-issue-collector-plugin:issuecollector/com.atlassian.jira.collector.plugin.jira-issue-collector-plugin:issuecollector.js?locale=en-US&collectorId=bb066400", "id": "bb066400"}, "jira-software-repo-page": {"url": "https://jira.atlassian.com/s/1ce410db1c7e1b043ed91ab8e28352e2-T/yl6d1c/804001/619f60e5de428c2ed7545f16096c303d/3.1.0/_/download/batch/com.atlassian.jira.collector.plugin.jira-issue-collector-plugin:issuecollector/com.atlassian.jira.collector.plugin.jira-issue-collector-plugin:issuecollector.js?locale=en-UK&collectorId=064d6699", "id": "064d6699"}, "code-review-rollout": {"url": "https://bitbucketfeedback.atlassian.net/s/d41d8cd98f00b204e9800998ecf8427e-T/-4bqv2z/b/20/a44af77267a987a660377e5c46e0fb64/_/download/batch/com.atlassian.jira.collector.plugin.jira-issue-collector-plugin:issuecollector/com.atlassian.jira.collector.plugin.jira-issue-collector-plugin:issuecollector.js?locale=en-US&collectorId=de003e2d", "id": "de003e2d"}, "source-browser": {"url": "https://bitbucketfeedback.atlassian.net/s/d41d8cd98f00b204e9800998ecf8427e-T/-tqnsjm/b/20/a44af77267a987a660377e5c46e0fb64/_/download/batch/com.atlassian.jira.collector.plugin.jira-issue-collector-plugin:issuecollector/com.atlassian.jira.collector.plugin.jira-issue-collector-plugin:issuecollector.js?locale=en-US&collectorId=c19c2ff6", "id": "c19c2ff6"}}, "STATUSPAGE_URL": "https://bitbucket.status.atlassian.com/", "CANON_URL": "https://bitbucket.org", "CONSENT_HUB_FRONTEND_BASE_URL": "https://preferences.atlassian.com", "API_CANON_URL": "https://api.bitbucket.org", "SOCIAL_AUTH_ATLASSIANID_LOGOUT_URL": "https://id.atlassian.com/logout", "EMOJI_STANDARD_BASE_URL": "https://api-private.atlassian.com/emoji/"}; window.__webpack_nonce__ = 'xxI7cPsOVRt9B81s'; window.isInitialLoadApdex = true; </script> <script nonce="xxI7cPsOVRt9B81s" src="https://d301sr5gafysq2.cloudfront.net/frontbucket/assets/i18n/en.4509eaad.js"></script> <script nonce="xxI7cPsOVRt9B81s" src="https://d301sr5gafysq2.cloudfront.net/frontbucket/assets/present/ajs.53f719bc.js"></script> <script nonce="xxI7cPsOVRt9B81s" src="https://d301sr5gafysq2.cloudfront.net/frontbucket/assets/present/app.8acf32f0.js"></script> <script nonce="xxI7cPsOVRt9B81s" src="https://d301sr5gafysq2.cloudfront.net/frontbucket/assets/present/performance-timing.f1eda5e1.js" defer></script> <script nonce="xxI7cPsOVRt9B81s" type="text/javascript">window.NREUM||(NREUM={});NREUM.info={"beacon":"bam-cell.nr-data.net","queueTime":0,"licenseKey":"a2cef8c3d3","agent":"","transactionName":"NFcGYEdUW0IAVE1QCw0dIkFbVkFYDlkWWw0XUBFXXlBBHwBHSUpKEVcUWwcbQ1gEQEoDNwxHFldQY1xUFhleXBA=","applicationID":"548124220,1841284","errorBeacon":"bam-cell.nr-data.net","applicationTime":263}</script> </body> </html>

Repository for hosting the FAQ and homepage of c:geo. This is **NOT** the right place to report bugs against the app.