FanControl.Releases

This project utilizes the Digital circuit simulation software,to build a CPU that supports a simple instruction set and simple peripheral circuit simulation. The goal is to support system boot, startup, operation, interrupt handling, peripheral control, and other functions.

SEIS 665 Assignment 2: Linux & Git Overview This week we will focus on becoming familiar with launching a Linux server and working with some basic Linux and Git commands. We will use AWS to launch and host the Linux server. AWS might seem a little confusing at this point. Don’t worry, we will gain much more hands-on experience with AWS throughout the course. The goal is to get you comfortable working with the technology and not overwhelm you with all the details. Requirements You need to have a personal AWS account and GitHub account for this assignment. You should also read the Git Hands-on Guide and Linux Hands-on Guide before beginning this exercise. A word about grading One of the key DevOps practices we learn about in this class is the use of automation to increase the speed and repeatability of processes. Automation is utilized during the assignment grading process to review and assess your work. It’s important that you follow the instructions in each assignment and type in required files and resources with the proper names. All names are case sensitive, so a name like "Web1" is not the same as "web1". If you misspell a name, use the wrong case, or put a file in the wrong directory location you will lose points on your assignment. This is the easiest way to lose points, and also the most preventable. You should always double-check your work to make sure it accurately reflects the requirements specified in the assignment. You should always carefully review the content of your files before submitting your assignment. The assignment Let’s get started! Create GitHub repository The first step in the assignment is to setup a Git repository on GitHub. We will use a special solution called GitHub Classroom for this course which automates the process of setting up student assignment repositories. Here are the basic steps: Click on the following link to open Assignment 2 on the GitHub Classroom site: https://classroom.github.com/a/K4zcVmX- (Links to an external site.)Links to an external site. Click on the Accept this assignment button. GitHub Classroom will provide you with a URL (https) to access the assignment repository. Either copy this address to your clipboard or write it down somewhere. You will need to use this address to set up the repository on a Linux server. Example: https://github.com/UST-SEIS665/hw2-seis665-02-spring2019-<your github id>.git At this point your new repository to ready to use. The repository is currently empty. We will put some content in there soon! Launch Linux server The second step in the assignment is to launch a Linux server using AWS EC2. The server should have the following characteristics: Amazon Linux 2 AMI 64-bit (usually the first option listed) Located in a U.S. region (us-east-1) t2.micro instance type All default instance settings (storage, vpm, security group, etc.) I’ve shown you how to launch EC2 instances in class. You can review it on Canvas. Once you launch the new server, it may take a few minutes to provision. Log into server The next step is to log into the Linux server using a terminal program with a secure shell (SSH) support. You can use iTerm2 (Links to an external site.)Links to an external site. on a Mac and GitBash/PuTTY (Links to an external site.)Links to an external site. on a PC. You will need to have the private server key and the public IP address before attempting to log into the server. The server key is basically your password. If you lose it, you will need to terminate the existing instance and launch a new server. I recommend reusing the same key when launching new servers throughout the class. Note, I make this recommendation to make the learning process easier and not because it is a common security practice. I’ve shown you how to use a terminal application to log into the instance using a Windows desktop. Your personal computer or lab computer may be running a different OS version, but the process is still very similar. You can review the videos on the Canvas. Working with Linux If you’ve made it this far, congratulations! You’ve made it over the toughest hurdle. By the end of this course, I promise you will be able to launch and log into servers in your sleep. You should be looking at a login screen that looks something like this: Last login: Mon Mar 21 21:17:54 2016 from 174-20-199-194.mpls.qwest.net __| __|_ ) _| ( / Amazon Linux AMI ___|\___|___| https://aws.amazon.com/amazon-linux-ami/2015.09-release-notes/ 8 package(s) needed for security, out of 17 available Run "sudo yum update" to apply all updates. ec2-user@ip-172-31-15-26 ~]$ Your terminal cursor is sitting at the shell prompt, waiting for you to type in your first command. Remember the shell? It is a really cool program that lets you start other programs and manage services on the Linux system. The rest of this assignment will be spent working with the shell. Note, when you are asked to type in a command in the steps below, don’t type in the dollar-sign ($) character. This is just meant to represent the command prompt. The actual commands are represented by the characters to the right of the command prompt. Let’s start by asking the shell for some help. Type in: $ help The shell provides you with a list of commands you can run along with possible command options. Next, check out one of the pages in the built-in manual: $ man ls A man page will appear with information on how to use the ls command. This command is used to list the contents of file directories. Either space through the contents of the man page or hit q to exit. Most of the core Linux commands have man pages available. But honestly, some of these man pages are a bit hard to understand. Sometimes your best bet is to search on Google if you are trying to figure out how to use a specific command. When you initially log into Linux, the system places you in your home directory. Each user on the system has a separate home directory. Let’s see where your home directory is located: $ pwd The response should be /home/ec2-user. The pwd command is handy to remember if you ever forget what file directory you are currently located in. If you recall from the Linux Hands-on Guide, this directory is also your current working directory. Type in: $ cd / The cd command let’s you change to a new working directory on the server. In this case, we changed to the root (/) directory. This is the parent of all the other directories on the file system. Type in: $ ls The ls command lists the contents of the current directory. As you can see, root directory contains many other directories. You will become familiar with these directories over time. The ls command provides a very basic directory listing. You need to supply the command with some options if you want to see more detailed information. Type in: $ ls -la See how this command provides you with much more detailed information about the files and directories? You can use this detailed listing to see the owner, group, and access control list settings for each file or directory. Do you see any files listed? Remember, the first character in the access control list column denotes whether a listed item is a file or a directory. You probably see a couple files with names like .autofsck. How come you didn’t see this file when you typed in the lscommand without any options? (Try to run this command again to convince yourself.) Files names that start with a period are called hidden files. These files won’t appear on normal directory listings. Type in: $ cd /var Then, type in: $ ls You will see a directory listing for the /var directory. Next, type in: $ ls .. Huh. This directory listing looks the same as the earlier root directory listing. When you use two periods (..) in a directory path that means you are referring to the parent directory of the current directory. Just think of the two dots as meaning the directory above the current directory. Now, type in: $ cd ~ $ pwd Whoa. We’re back at our home directory again. The tilde character (~) is another one of those handy little directory path shortcuts. It always refers to our personal home directory. Keep in mind that since every user has their own home directory, the tilde shortcut will refer to a unique directory for each logged-in user. Most students are used to navigating a file system by clicking a mouse in nested graphical folders. When they start using a command-line to navigate a file system, they sometimes get confused and lose track of their current position in the file system. Remember, you can always use the pwd command to quickly figure out what directory you are currently working in. Let’s make some changes to the file system. We can easily make our own directories on the file system. Type: mkdir test Now type: ls Cool, there’s our new test directory. Let’s pretend we don’t like that directory name and delete it. Type: rmdir test Now it’s gone. How can you be sure? You should know how to check to see if the directory still exists at this point. Go ahead and check. Let’s create another directory. Type in: $ mkdir documents Next, change to the new directory: $ cd documents Did you notice that your command prompt displays the name of the current directory? Something like: [ec2-user@ip-172-31-15-26 documents]$. Pretty handy, huh? Okay, let’s create our first file in the documents directory. This is just an empty file for training purposes. Type in: $ touch paper.txt Check to see that the new file is in the directory. Now, go back to the previous directory. Remember the double dot shortcut? $ cd .. Okay, we don’t like our documents directory any more. Let’s blow it away. Type in: $ rmdir documents Uh oh. The shell didn’t like that command because the directory isn’t empty. Let’s change back into the documents directory. But this time don’t type in the full name of the directory. You can let shell auto-completion do the typing for you. Type in the first couple characters of the directory name and then hit the tab key: $ cd doc<tab> You should use the tab auto-completion feature often. It saves typing and makes working with the Linux file system much much easier. Tab is your friend. Now, remove the file by typing: $ rm paper.txt Did you try to use the tab key instead of typing in the whole file name? Check to make sure the file was deleted from the directory. Next, create a new file: $ touch file1 We like file1 so much that we want to make a backup copy. Type: $ cp file1 file1-backup Check to make sure the new backup copy was created. We don’t really like the name of that new file, so let’s rename it. Type: $ mv file1-backup backup Moving a file to the same directory and giving it a new name is basically the same thing as renaming it. We could have moved it to a different directory if we wanted. Let’s list all of the files in the current directory that start with the letter f: $ ls f* Using wildcard pattern matching in file commands is really useful if you want the command to impact or filter a group of files. Now, go up one directory to the parent directory (remember the double dot shortcut?) We tried to remove the documents directory earlier when it had files in it. Obviously that won’t work again. However, we can use a more powerful command to destroy the directory and vanquish its contents. Behold, the all powerful remove command: $ rm -fr documents Did you remember to use auto-completion when typing in documents? This command and set of options forcibly removes the directory and its contents. It’s a dangerous command wielded by the mightiest Linux wizards. Okay, maybe that’s a bit of an exaggeration. Just be careful with it. Check to make sure the documents directory is gone before proceeding. Let’s continue. Change to the directory /var and make a directory called test. Ugh. Permission denied. We created this darn Linux server and we paid for it. Shouldn’t we be able to do anything we want on it? You logged into the system as a user called ec2-user. While this user can create and manage files in its home directory, it cannot change files all across the system. At least it can’t as a normal user. The ec2-user is a member of the root group, so it can escalate its privileges to super-user status when necessary. Let’s try it: $ sudo mkdir test Check to make sure the directory exists now. Using sudo we can execute commands as a super-user. We can do anything we want now that we know this powerful new command. Go ahead and delete the test directory. Did you remember to use sudo before the rmdir command? Check to make sure the directory is gone. You might be asking yourself the question: why can we list the contents of the /var directory but not make changes? That’s because all users have read access to the /var directory and the ls command is a read function. Only the root users or those acting as a super-user can write changes to the directory. Let’s go back to our home directory: $ cd ~ Editing text files is a really common task on Linux systems because many of the application configuration files are text files. We can create a text file by using a text editor. Type in: $ nano myfile.conf The shell starts up the nano text editor and places your terminal cursor in the editing screen. Nano is a simple text-based word processor. Type in a few lines of text. When you’re done writing your novel, hit ctrl-x and answer y to the prompt to save your work. Finally, hit enter to save the text to the filename you specified. Check to see that your file was saved in the directory. You can take a look at the contents of your file by typing: $ cat myfile.conf The cat command displays your text file content on the terminal screen. This command works fine for displaying small text files. But if your file is hundreds of lines long, the content will scroll down your terminal screen so fast that you won’t be able to easily read it. There’s a better way to view larger text files. Type in: $ less myfile.conf The less command will page the display of a text file, allowing you to page through the contents of the file using the space bar. Your text file is probably too short to see the paging in action though. Hit q to quit out of the less text viewer. Hit the up-arrow key on your keyboard a few times until the commmand nano myfile.conf appears next to your command prompt. Cool, huh? The up-arrow key allows you to replay a previously run command. Linux maintains a list of all the commands you have run since you logged into the server. This is called the command history. It’s a really useful feature if you have to re-run a complex command again. Now, hit ctrl-c. This cancels whatever command is displayed on the command line. Type in the following command to create a couple empty files in the directory: $ touch file1 file2 file3 Confirm that the files were created. Some commands, like touch. allow you to specify multiple files as arguments. You will find that Linux commands have all kinds of ways to make tasks more efficient like this. Throughout this assignment, we have been running commands and viewing results on the terminal screen. The screen is the standard place for commands to output results. It’s known as the standard out (stdout). However, it’s really useful to output results to the file system sometimes. Type in: $ ls > listing.txt Take a look at the directory listing now. You just created a new file. View the contents of the listing.txt file. What do you see? Instead of sending the output from the ls command to the screen we sent it to a text file. Let’s try another one. Type: $ cat myfile.conf > listing.txt Take a look at the contents of the listing.txt file again. It looks like your myfile.conf file now. It’s like you made a copy of it. But what happened to the previous content in the listing.txt file? When you redirect the output of a command using the right angle-bracket character (>), the output overwrites the existing file. Type this command in: $ cat myfile.conf >> listing.txt Now look at the contents of the listing.txt file. You should see your original content displayed twice. When you use two angle-bracket characters in the commmand the output appends (or adds to) the file instead of overwriting it. We redirected the output from a command to a text file. It’s also possible to redirect the input to a command. Typically we use a keyboard to provide input, but sometimes it makes more sense to input a file to a command. For example, how many words are in your new listing.txt file? Let’s find out. Type in: $ wc -w < listing.txt Did you get a number? This command inputs the listing.txt file into a word count program called wc. Type in the command: $ ls /usr/bin The terminal screen probably scrolled quickly as filenames flashed by. The /usr/bin directory holds quite a few files. It would be nice if we could page through the contents of this directory. Well, we can. We can use a special shell feature called pipes. In previous steps, we redirected I/O using the file system. Pipes allow us to redirect I/O between programs. We can redirect the output from one program into another. Type in: $ ls /usr/bin | less Now the directory listing is paged. Hit the spacebar to page through the listing. The pipe, represented by a vertical bar character (|), takes the output from the ls command and redirects it to the less command where the resulting output is paged. Pipes are super powerful and used all the time by savvy Linux operators. Hit the q key to quit the paginated directory listing command. Working with shell scripts Now things are going to get interesting. We’ve been manually typing in commands throughout this exercise. If we were running a set of repetitive tasks, we would want to automate the process as much as possible. The shell makes it really easy to automate tasks using shell scripts. The shell provides many of the same features as a basic procedural programming language. Let’s write some code. Type in this command: $ j=123 $ echo $j We just created a variable named j referencing the string 123. The echo command printed out the value of the variable. We had to use a dollar sign ($) when referencing the variable in another command. Next, type in: $ j=1+1 $ echo $j Is that what you expected? The shell just interprets the variable value as a string. It’s not going to do any sort of computation. Typing in shell script commands on the command line is sort of pointless. We want to be able to create scripts that we can run over-and-over. Let’s create our first shell script. Use the nano editor to create a file named myscript. When the file is open in the editor, type in the following lines of code: #!/bin/bash echo Hello $1 Now quit the editor and save your file. We can run our script by typing: $ ./myscript World Er, what happened? Permission denied. Didn’t we create this file? Why can’t we run it? We can’t run the script file because we haven’t set the execute permission on the file. Type in: $ chmod u+x myscript This modifies the file access control list to allow the owner of the file to execute it. Let’s try to run the command again. Hit the up-arrow key a couple times until the ./myscript World command is displayed and hit enter. Hooray! Our first shell script. It’s probably a bit underwhelming. No problem, we’ll make it a little more complex. The script took a single argument called World. Any arguments provided to a shell script are represented as consecutively numbered variables inside the script ($1, $2, etc). Pretty simple. You might be wondering why we had to type the ./ characters before the name of our script file. Try to type in the command without them: $ myscript World Command not found. That seems a little weird. Aren’t we currently in the directory where the shell script is located? Well, that’s just not how the shell works. When you enter a command into the shell, it looks for the command in a predefined set of directories on the server called your PATH. Since your script file isn’t in your special path, the shell reports it as not found. By typing in the ./ characters before the command name you are basically forcing the shell to look for your script in the current directory instead of the default path. Create another file called cleanup using nano. In the file editor window type: #!/bin/bash # My cleanup script mkdir archive mv file* archive Exit the editor window and save the file. Change the permissions on the script file so that you can execute it. Now run the command: $ ./cleanup Take a look at the file directory listing. Notice the archive directory? List the contents of that directory. The script automatically created a new directory and moved three files into it. Anything you can do manually at a command prompt can be automated using a shell script. Let’s create one more shell script. Use nano to create a script called namelist. Here is the content of the script: #!/bin/bash # for-loop test script names='Jason John Jane' for i in $names do echo Hello $i done Change the permissions on the script file so that you can execute it. Run the command: $ ./namelist The script will loop through a set of names stored in a variable displaying each one. Scripts support several programming constructs like for-loops, do-while loops, and if-then-else. These building blocks allow you to create fairly complex scripts for automating tasks. Installing packages and services We’re nearing the end of this assignment. But before we finish, let’s install some new software packages on our server. The first thing we should do is make sure all the current packages installed on our Linux server are up-to-date. Type in: $ sudo yum update -y This is one of those really powerful commands that requires sudo access. The system will review the currently installed packages and go out to the Internet and download appropriate updates. Next, let’s install an Apache web server on our system. Type in: $ sudo yum install httpd -y Bam! You probably never knew that installing a web server was so easy. We’re not going to actually use the web server in this exercise, but we will in future assignments. We installed the web server, but is it actually running? Let’s check. Type in: $ sudo service httpd status Nope. Let’s start it. Type: $ sudo service httpd start We can use the service command to control the services running on the system. Let’s setup the service so that it automatically starts when the system boots up. Type in: $ sudo chkconfig httpd on Cool. We installed the Apache web server on our system, but what other programs are currently running? We can use the pscommand to find out. Type in: $ ps -ax Lots of processes are running on our system. We can even look at the overall performance of our system using the topcommand. Let’s try that now. Type in: $ top The display might seem a little overwhelming at first. You should see lots of performance information displayed including the cpu usage, free memory, and a list of running tasks. We’re almost across the finish line. Let’s make sure all of our valuable work is stored in a git repository. First, we need to install git. Type in the command: $ sudo yum install git -y Check your work It’s very important to check your work before submitting it for grading. A misspelled, misplaced or missing file will cost you points. This may seem harsh, but the reality is that these sorts of mistakes have consequences in the real world. For example, a server instance could fail to launch properly and impact customers because a single required file is missing. Here is what the contents of your git repository should look like before final submission: ┣archive ┃ ┣ file1 ┃ ┣ file2 ┃ ┗ file3 ┣ namelist ┗ myfile.conf Saving our work in the git repository Next, make sure you are still in your home directory (/home/ec2-user). We will install the git repository you created at the beginning of this exercise. You will need to modify this command by typing in the GitHub repository URL you copied earlier. $ git clone <your GitHub URL here>.git Example: git clone https://github.com/UST-SEIS665/hw2-seis665-02-spring2019-<your github id>.git The git application will ask you for your GitHub username and password. Note, if you have multi-factor authentication enabled on your GitHub account you will need to provide a personal token instead of your password. Git will clone (copy) the repository from GitHub to your Linux server. Since the repository is empty the clone happens almost instantly. Check to make sure that a sub-directory called "hw2-seis665-02-spring2019-<username>" exists in the current directory (where <username> is your GitHub account name). Git automatically created this directory as part of the cloning process. Change to the hw2-seis665-02-spring2019-<username> directory and type: $ ls -la Notice the .git hidden directory? This is where git actually stores all of the file changes in your repository. Nothing is actually in your repository yet. Change back to the parent directory (cd ..). Next, let’s move some of our files into the repository. Type: $ mv archive hw2-seis665-02-spring2019-<username> $ mv namelist hw2-seis665-02-spring2019-<username> $ mv myfile.conf hw2-seis665-02-spring2019-<username> Hopefully, you remembered to use the auto-complete function to reduce some of that typing. Change to the hw2-seis665-02-spring2019-<username> directory and list the directory contents. Your files are in the working directory, but are not actually stored in the repository because they haven’t been committed yet. Type in: $ git status You should see a list of untracked files. Let’s tell git that we want these files tracked. Type in: $ git add * Now type in the git status command again. Notice how all the files are now being tracked and are ready to be committed. These files are in the git staging area. We’ll commit them to the repository next. Type: $ git commit -m 'assignment 2 files' Next, take a look at the commit log. Type: $ git log You should see your commit listed along with an assigned hash (long string of random-looking characters). Finally, let’s save the repository to our GitHub account. Type in: $ git push origin master The git client will ask you for your GitHub username and password before pushing the repository. Go back to the GitHub.com website and login if you have been logged out. Click on the repository link for the assignment. Do you see your files listed there? Congratulations, you completed the exercise! Terminate server The last step is to terminate your Linux instance. AWS will bill you for every hour the instance is running. The cost is nominal, but there’s no need to rack up unnecessary charges. Here are the steps to terminate your instance: Log into your AWS account and click on the EC2 dashboard. Click the Instances menu item. Select your server in the instances table. Click on the Actions drop down menu above the instances table. Select the Instance State menu option Click on the Terminate action. Your Linux instance will shutdown and disappear in a few minutes. The EC2 dashboard will continue to display the instance on your instance listing for another day or so. However, the state of the instance will be terminated. Submitting your assignment — IMPORTANT! If you haven’t already, please e-mail me your GitHub username in order to receive credit for this assignment. There is no need to email me to tell me that you have committed your work to GitHub or to ask me if your GitHub submission worked. If you can see your work in your GitHub repository, I can see your work.

SpreadCoin October 5, 2014 Introduction In proof-of-work cryptocurrencies new coins are generated by the network through the process of mining. One of the purposes of mining is to protect network from double spending attacks and history rewriting. Miners generate new blocks and check contents of the blocks generated by other peers for conformation to the network rules. However, many miners now delegate all the checking work crucial to cryptocurrency security to pools. This means that pool operators do not have any large hashing power but have control over generation of new blocks. This brings unnecessary centralization to otherwise decentralized system. Controlling more than 50% of mining power allows to perform double-spending attacks with 100% chance of success but even with less than 50% control it is possible to perform attacks which have chances to succeed1 . The core idea of SpreadCoin is to prevent creation of pools and thus make mining more decentralized and the whole system more secure. Pool Prevention In pooled mining miners perform only the work which is necessary to fulfill the proof-of-work requirements and pools take care of block generation and broadcasting and distribute reward among miners according to the shares they submit. In this scheme miner has two alternatives: 1. Solo mining. In this case miner cannot send shares to the pool because they will not be accepted. 2. Pooled mining. Miner’s shares will be accepted by the pool but in the case miner will actually generate a new block its reward will go to the pool which will redistribute it to all miners. This allows organization of pools because miners has no way to cheat and steal generated money. To prevent creation of pools we must remove this possibility so that if pool will be created than miner can mine in a pool, submit shares as usual and get reward for them but in the case of actually finding a block miner can send it directly to the network instead of the pool and get full reward for it. In SpreadCoin mining is organized in such way that miner must know the following things: 1. Private key corresponding to the coinbase transaction. 2. Whole block, not only its header. This ensures that miner can broadcast mined block and spend coins generated in that block. It may seem that it is necessary to know only the private key to spend coinbase transaction. If two conflicting transactions will appear on the network then the one that was broadcasted first will have much higher probability to be included in a block because each peer remembers and retransmits only the first one of the conflicting transactions. If both miner and pool know private key but only pool knows the content of the block than pool can generate and broadcast spending transaction earlier than miner. If both miner 1 Double-spending. Bitcoin Wiki. https://en.bitcoin.it/wiki/Double-spending and pool know content of the block than miner will be the first one who can broadcast block and spending transaction. To prove knowledge of the private key and whole block there are two new fields in the block header: MinerSignature and hashWholeBlock. MinerSignature is a digital signature of all fields of the block header except for the hashWholeBlock. Changing any information in the block requires regeneration of this signature which means that it is necessary to recalculate it during each iteration of the mining process. This implies that miner must be able to sign any arbitrary data. hashWholeBlock is a SHA-256 hash of the block data arranged as follows: Padding ensures that there is no incentive to mine empty blocks without transactions. Padding values are computed using simple algorithm which initializes last 32 bytes (8 uint32) with hashPrevBlock and then goes backward and computes remaining uint32 values using the following recursive formula: 𝐼𝑖 = 𝐼𝑖+3 ∙ 𝐼𝑖+7. This algorithm ensures that there is no efficient way to compute padding values on the fly during hash computation which otherwise could potentially give some advantage to mine empty blocks in certain computing environments. It is important that block is hashed twice. If it was hashed only once then pool could hash the beginning of the block and send resulting hash state to the miners. Each miner would then modify some information in the end of the block and recalculate the hash based on the known state without actual knowledge about what is contained in the beginning of the block. Appending block data to itself make it necessary to know the whole block to recalculate hashWholeBlock. Pool may detect and ban cheating miners. However, many miners may still prefer to cheat so that pool will be completely unusable for honest miners. Miners that have low probability of finding a block will get more profit by stealing reward for accidentally found block even if pool will ban them thereafter. Miners that have enough mining power to find blocks consistently can still connect to a pool and submit shares for some time but steal the first found block. This way they can get both reward for their shares and the actual mined block. Given all this it is expected that no one will create a pool. But even if someone will than it can be countered by releasing stealing miner software which many miners will switch to. Compact Transactions SpreadCoin as well as Bitcoin uses ECDSA signatures. Each address in Bitcoin is a hash of an ECDSA public key. To spend coins sent to an address it is necessary to provide public key matching to that hash and a signature. This results in 139 or 107 bytes for each transaction input script (scriptSig) depending on Block Padding MAX_BLOCK_SIZE Block Padding whether compact public key is used. However, it is possible to recover public key from the signature2 which means that it is not necessary to provide it in transaction input. Together with using compact representation of the signature3 it allows to reduce size of transaction input script from 139 or 107 bytes in Bitcoin to 67 bytes in SpreadCoin. Recovering public key has almost no extra CPU cost compared to the usual signature verification process used in Bitcoin. This is important because the CPU cost of ECDSA signature verification is a bottleneck for Bitcoin transaction processing. Usual output script (scriptPubKey) in Bitcoin looks as follows: OP_DUP OP_HASH160 5bd18804e4bb43a4bb8b6bc88408970bafaf4a38 OP_EQUALVERIFY OP_CHECKSIG In SpreadCoin the semantics of the OP_CHECKSIG instruction was changed to checking signature by hash of the public key (it recovers public key and compares its hash with the provided one). This results in a much simpler script in SpreadCoin: 5bd18804e4bb43a4bb8b6bc88408970bafaf4a38 OP_CHECKSIG This results in additional minor space saving because this script is 3 bytes smaller. Smooth Supply Block reward in Bitcoin is computed using the following formula: 𝑅ℎ = 𝑅0 ∙ 2 −⌊ ℎ 𝑝 ⌋ , where ℎ – block height, 𝑝 – reward halving period, 𝑅0 – initial reward, 𝑅ℎ – reward for block ℎ, ⌊ ⌋ – floor function. This method results in abrupt reward changes near halving points. SpreadCoin uses simple linear interpolation between halving points to make reward decrease much smother. This is achieved by modifying reward using the following formula: 𝑅ℎ ′ = 4 3 (𝑅ℎ − 𝑅ℎ ∙ ℎ mod 𝑝 2𝑝 ). SpreadCoin uses 𝑝 = 2 ∙ 106 as its reward halving period. 2 ECDSA Signatures allow recovery of the public key. Bitcoin Forum. https://bitcointalk.org/?topic=6430.0%29%3F 3 Why the signature is always 65 (1+32+32) bytes long? Bitcoin Stack Exchange. https://bitcoin.stackexchange.com/questions/12554/why-the-signature-is-always-65-13232-bytes-long | NO YEAR 2106 PROBLEM The time stamp field in the block header is now 64 bit instead of 32 bit (Bitcoin) so that much farther date times are possible (>Year 2106) Upcoming features that are in development and will be introduced over the next weeks and months: SERVICENODES A servicenode is a node which runs continuously (24/7) on a server and which provides services within the spreadcoin network. You have to pay a collateral to be able to install a servernode (in return your servicenode will earn a steady income). This collateral is determined by a free market price discovery. (No fix collateral. The price is allowed to fluctuate over time.) COMPETITIVE COLLATERAL Furthermore, to introduce a competitive nature to the servicenodes there will only ever be a limited number of allowed servicenodes worldwide. Since the collateral isn't set in stone, but the amount of servicenodes is fixed, the price of a servicenode will be determined by the participants themselves. It is expected that the price will vary widely over time, which exposes it to the same market forces that hashrate and currency value are exposed to too. SERVICE APPS There are a number of decentralized applications that will run on servicenodes. Most likely those apps will include: 1) "Spread the message" (an in-wallet encrypted messaging system, which allows you to send a message to an SPR address) 2) "Spread the Search" (A decentralized search engine that lets the servicenodes crawl and map the entire internet.) . SPREADX11 SpreadX11 is different from plain X11 by introducing a sophisticated pool prevention mechanism. With SpreadX11 every block header contains additional information (MinerSignature and hashWholeBlock). With the help of this information the protocol ensures that the miner of a new block is always also the first one to know the content of the whole block and the private key to spend the coinbase transaction. (contrary to pool mining where the pool operator is the first one to know those things) So when a miner finds a block, he must himself sign and transmit the block to the network (like solo mining), instead of having a pool handle this for him. This effectively prevents pools by making their rules non-enforceable, since any miner in any assumed pool can always just steal the block reward instead of following the rules set up by the pool. COMPACT TRANSACTIONS SpreadCoin uses a more compact representation for signatures in transactions. SpreadCoin as well as Bitcoin uses ECDSA signatures. While bitcoin keeps a copy of the public key of the corresponding signature around, SpreadCoin ommits this by recovering the public key on the fly directly from the signature. This way it is not necessary to keep the public key of every ECDSA signature in the blockchain, so this leads to *smaller transactions and hence a smaller blockchain (at the cost of a few CPU cycles more). (*reduction in size of transaction from 139 or 107 bytes in Bitcoin to 67 bytes in SpreadCoin.) SMOOTH HALVING Unlike Bitcoin, there are no abrupt reward halvings in SpreadCoin. Block reward is smoothly decreasing over time. UNIQUE DESIGN WITH IN-WALLET VANITYGEN One of the first apps to be built into the wallet is the vanity generator (or vanity gen) which allows anyone to create personalised payment addresses. The easy to use wallet lets you search through trillions of payment addresses allowing you to find one or multiple vanity addresses, which are then stored safely along with the private keys on your own computer - and nowhere else. Searching using the vanity gen is probabilistic, so the amount of time required to find your chosen address patterns depends on how complex the pattern is, the speed of your computer, and a little bit of luck. You can use the vanity gen for a bit of fun, to make your address standout from the crowd or to create a link to a brand, business or other organisation. You can even search for addresses that others might be willing to buy from you. SpreadCoin is a new cryptocurrency which is more decentralized than Bitcoin. It prevents centralization of hashing power in pools, which is one of the main concerns of Bitcoin security. SpreadCoin was fairly launched on 29 July 2014, 9:00 UTC with no premine.

This Python script was created for the purpose to control a PWM FAN Noctua NF-A4x20 5V, using Raspberry Pi 4B hardware features. The script use WiringPi-Python as a dependecy, it is used to set Hardware PWM value clock as 25Khz that was specified by Intel (c.f. “4-Wire Pulse Width Modulation (PWM) Controlled Fans”, Intel Corporation September 2005, revision 1.3), to read the FAN speed using the tachometer, it is read by using Hardware provided interruption pin. Using Hardware feature use less CPU to execute the work, avoiding to use Raspberry Pi CPU resource only to control the FAN speed.

BitRAT CrackedIt is coded in C++ programming language. It is the latest version of the best PC RAT 2022 in the market. It is used by hackers to remotely access their victims. This RAT can handles up to 10k bots at a single time without any kind of lag and low CPU usages. It can bind 5 files up to a time. It is the best pc remote administration tool for 2022. This best remote desktop software 2022 supports all-new browser versions for the password recovery feature. Their password recovery feature is updated every time and recovers passwords from all updated browsers. It is the best RAT tool for 2022.